Abstract:Context: In a very small surface separation, the fluid flow is actually multiscale consisting of both the molecular scale non-continuum adsorbed layer flow and the intermediate macroscopic continuum fluid flow. Classical simulation of this flow often takes over large computational source and is not affordable owing to using molecular dynamics simulation (MDS) to model the adsorbed layer flow, if the flow field size is on the engineering size scale such as of 0.01-10 mm or even bigger like occurring in micro or macro hydrodynamic bearings. The present paper uses full MDS to validate Zhang's multiscale flow model, which yields the closed-form explicit flow equations respectively for the adsorbed layer flow and the intermediate continuum fluid flow. Here, full MDS was carried out for the pressure-driven flow of methane in the nano slit pore made of silicon respectively with the channel heights 5.79 nm, 11.57 nm, and 17.36 nm. According to the number density distribution, the flow areas were respectively discriminated as the adsorbed layer zone and the intermediate fluid zone. The values of the characteristic parameters for Zhang's multiscale scheme were extracted from full MDS and input to Zhang's multiscale flow equations respectively for calculating the flow velocity profile and the volume flow rates of the adsorbed layers and the intermediate fluid. It was found that for these three channel heights, the flow velocity profiles calculated from Zhang's model approximate those calculated from full MDS, while the total flow rates through the channel calculated from Zhang's model are close to those calculated from full MDS. The accuracy of Zhang's multiscale flow model is improved with the increase of the channel height. Method: The recent modification of the optimized potential for liquid simulation (MOPLS) model was used to calculate the interaction force between two methane molecules. In order to calculate the interaction force between the wall atoms and the methane molecules accurately, our previous non-equilibrium multiscale MDS was used. The interaction forces between the methane molecule and the wall atom were obtained from the coupled potential function by the L-B mixing rule when the fluid molecules arrived at near wall. The methane molecule diameter was obtained from the radial distribution function by using equilibrium MDS under the same initial conditions. The local viscosities across the adsorbed layer were obtained from the local velocity profile by using the Poiseuille flow method. The motion equation of the methane molecule was solved by the leapfrog method. The temperature of the simulation system was checked by Bhadauria's method, i.e., the system temperature was rectified by the velocities in the y- and z-directions. The flow velocity distributions across the channel height and the volume flow rates through the channel were also calculated from Zhang's closed-form explicit flow equations respectively for the adsorbed layer flow and the intermediate fluid flow. The results respectively obtained from full MDS and Zhang's multiscale flow equations were then compared.

Investigation of the Relationship Between Nanochannel Width and Mass Transfer Characteristics for Dense Methane Nanofluidics

Transport Properties and Structure of Dense Methane Fluid in the Rough Nano-Channels Using Non-Equilibrium Multiscale Molecular Dynamics Simulation

Simulation Studies on Fluid Density Distribution of Micro-Flows in A Nano-Channel

The Effects of Wall Roughness on the Methane Flow in Nano-Channels Using Non-Equilibrium Multiscale Molecular Dynamics Simulation

Dynamical Behavior And Flow Mechanism Of Fluid In Nanochanel By Molecular Dynamics Simulation

Studying the Viscosity of Methane Fluid for Different Resolution Levels Models Using Poiseuille Flow in a Nano-Channel

Impact of complex boundary on the hydrodynamic properties of methane nanofluidic flow via non-equilibrium multiscale molecular dynamics simulation

Molecular Dynamics Simulation on Fluid Flow and Heat Transfer in Rough Nanochannels

Roughness Effect on Flow and Thermal Boundaries in Microchannel/nanochannel Flow Using Molecular Dynamics‐continuum Hybrid Simulation

Molecular Dynamics Simulations of Coupling Between Flow and Heat Transfer in A Nanochannel

Channel-width dependent pressure-driven flow characteristics of shale gas in nanopores

Mass Transfer and Chemical Properties of Nano-Micron Fluids

Molecular Dynamics Simulations of Gas Flow in Nanochannel with A Janus Interface

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

Experimental Investigation of MWCNT–water Nanofluids Flow and Convective Heat Transfer Characteristics in Multiport Minichannels with Smooth/micro-Fin Surface

Comparisons between full molecular dynamics simulation and Zhang's multiscale scheme for nanochannel flows

Thermal and Flow Characterization in Nanochannels with Tunable Surface Wettability: A Comprehensive Molecular Dynamics Study

Investigation on Pressure Drop Characteristic and Mass Transfer Performance of Gas–liquid Flow in Micro-Channels

Nanoscale Fluid Transport: Size and Rate Effects

Multi-scale study of liquid flow in micro/nanochannels: effects of surface wettability and topology

Study Progress of Liquid Flow in Nanochannel Using Molecular Dynamics