Abstract:Poly(lactic acid) (PLA) has received considerable attention due to its potential to replace the petrochemically derived plastics. However, its high flammability and the tendency to melt drip during combustion has restricted its applications in many areas. This manuscript reports the synthesis, characterization, and application of PBO-like small molecule additive flame retardant (FR) - phenyl-phosphonic bis(2-aminobenzothiazole) (P-ABZT) for bioplastic PLA. P-ABZT was incorporated into PLA by the combinatory solvent mixing and the compression molding approaches, and its FR, crystalline and mechanical properties were investigated. Fourier transform infrared (FTIR), H-1, C-13, and P-31 NMR confirmed the success of the synthetic process while thermogravimetric analysis (TGA) showed improved thermal stability and higher char yield after phosphorous was introduced. Cone calorimeter test demonstrated substantial reductions in peak heat release rate (PHRR similar to 50%), total heat released (THR similar to 37%), average effective heat of combustion (AEHC similar to 31%), peak CO and CO2 produced (PCOP similar to 60.4%, PCO2P similar to 31%) with just 3% P-ABZT loading. The limiting oxygen index (LOI) improved to 32.4% whilst a V-0 rating was attained in the UL-94 vertical burning test. Substantial reductions in pyrolysis gaseous products were obtained by P-ABZT/PLA composites compared to neat PLA in the TG-IR study. The Young's modulus, tensile strength, and elongation at break of PIA were not compromised with 1% P-ABZT loading. SEM and Raman spectroscopy showed improved char yield and quality due to the condensed and gas phase inhibition by P-ABZT. The low FR loading coupled with the improved FR performance indicates that P-ABZT is an excellent and economical FR for PLA. (C) 2019 Published by Elsevier Ltd.

Comparative Study on the Effect of Beta-Cyclodextrin and Polypseudorotaxane As Carbon Sources on the Thermal Stability and Flame Retardance of Polylactic Acid

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

A phosphorus-, nitrogen- and carbon-containing polyelectrolyte complex: preparation, characterization and its flame retardant performance on polypropylene

Study on Thermal Property, Flame Retardancy and Mechanism of Poly(lactic Acid)/intumescent Flame Retardant/NiAl Layer Double Hydroxide Nanocomposites

Synergistic flame retardancy of aluminum diethylphosphinate and piperazine pyrophosphate/β‐cyclodextrin in polylactic acid

Combustion Properties and Thermal Degradation Behavior of Polylactide with an Effective Intumescent Flame Retardant

Combustion and Thermal Properties of Polylactide with an Effective Phosphate-Containing Flame-Retardant Oligomer

Flame retardancy and thermal degradation behaviors of phosphate in combination with POSS in polylactide composites

Effect of Nickel Phytate on Flame Retardancy of Intumescent Flame Retardant Polylactic Acid

Modified β-cyclodextrin microspheres towards the application in intumescent fire resistance and smoke-suppressing of bio-based poly(L-lactic acid)

Flame retardant and anti-dripping properties of polylactic acid/poly(bis(phenoxy)phosphazene)/expandable graphite composite and its flame retardant mechanism

Synergistic Effect of Flame Retardants and Graphitic Carbon Nitride on Flame Retardancy of Polylactide Composites

Enhancement of flame retardant performance of bio-based polylactic acid composites with the incorporation of aluminum hypophosphite and expanded graphite

A Novel Phosphazene Cyclomatrix Network Polymer: Design, Synthesis and Application in Flame Retardant Polylactide

Effect of char-forming agents rich in tertiary carbon on flame retardant properties of polypropylene

Study on flame-retardancy and thermal degradation behaviors of intumescent flame-retardant polylactide systems

Comparison of different flame‐retardant agents for polylactic acid/fiber composites by a film‐stacking method: Flame‐retardant performance and mechanical properties

Effects of Ammonium Polyphosphate to Pentaerythritol Ratio on Composition and Properties of Carbonaceous Foam Deriving from Intumescent Flame-Retardant Polypropylene

Preparation of a Biobased Core‐shell Flame Retardant and Its Application in Polylactic Acid

Combination of Corn Pith Fiber and Biobased Flame Retardant: A Novel Method toward Flame Retardancy, Thermal Stability, and Mechanical Properties of Polylactide

Thermal, Crystalline and Mechanical Properties of Flame Retarded Poly(lactic Acid) with a PBO-like Small Molecule - Phenylphosphonic Bis(2-aminobenzothiazole)