Preparation of Novel Wo3/Hms Catalyst and Its Catalytic Performance for the Selective Oxidation of Cyclopentene

Xl Yang,Wl Dai,Jh Xu,H Chen,Y Cao,Kn Fan
DOI: https://doi.org/10.3321/j.issn:0253-9837.2005.04.013
IF: 16.5
2005-01-01
Chinese Journal of Catalysis
Abstract:The novel heterogeneous WO3/HMS catalyst was prepared by immobilization of tungstic acid on hexagonal mesoporous silica (HMS) by a special method using oxalic acid as the complexing agent, and was characterized by means of SEM, TEM, N-2 adsorption, XRD and laser Raman spectroscopy. The influences of Si/W molar ratio on the catalytic performance of WO3/HMS, WO3/SiO2 and WO3/MCM-41 for the selective oxidation of cyclopentene to glutaraldehyde under mild conditions were investigated. The as-prepared WO3/ HMS catalyst with a Si/W molar ratio of 30 showed excellent catalytic activity and selectivity. The conversions of both cyclopentene and H,02 were near 100 % and the selectivity for glutaraldehyde reached 72 %, which are much higher than those over the WO3/SiO2 catalyst and even exceed those over the homogeneous tungstic acid catalyst. The WO3/HMS catalyst remained similar morphology and hexagonal mesoporous structure as pure HMS. The highly dispersed WO3 on the HMS surface was identified as the active phase of the catalyst. The leaching of the active species was very low and had little effect on the catalytic performance. In addition, the WO3/HMS catalyst was very stable and could be reused for at least six times. The deactivated catalyst could be regenerated by simple calcination.
What problem does this paper attempt to address?