Hierarchical Porous Carbon Nanotube Spheres for High-performance K-O2 Batteries
Jilin University,Zhang Yantao,Guo Feng,Shen Yanbin,Chen Gang,Wei Yingjin,Xie Zhaojun,Zhou Zhen
DOI: https://doi.org/10.1007/s40242-021-0423-0
IF: 3.1
2021-01-01
Chemical Research in Chinese Universities
Abstract:In view of the ever-growing pressure for green gas emission reduction, there is an urgent need for renewable energy systems. Rechargeable alkali metal-oxygen batteries, especially lithium-oxygen(Li-O2) batteries, are deemed the most promising energy storage systems because of their higher theoretical energy density than that of current lithium-ion batteries[1—5]. However, their practical application is seriously hindered by the active oxygen intermediates(O2−, LiO2, and 1O2) and the insulating Li2O2 product[6,7]. The former is destructive to carbon materials, and the latter is dependent on electrocatalysts or redox mediators[8—10]. Therefore, although carbon-based materials have many unique properties, such as high electronic conductivity, light mass and low cost, they are not practical air cathodes for Li-O2 batteries. Instead of forming peroxide species, potassium-oxygen(K-O2) and sodium-oxygen(Na-O2) batteries enable a single-electron redox process of M++O2+ e−←→ MO2(M=K or Na). This provides an elegant strategy to enhance the oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) kinetics, thereby greatly decreasing overpotential and improving round-trip efficiency(>90%) even without any electrocatalyst[11—15]. Obviously, it paves an exciting avenue to use carbon materials in metal-O2 batteries, which can significantly reduce the cost and further increase the energy density of batteries. Besides, the replacement of Li with abundant Na and K also makes large-scale implementation more feasible[16]. Unlike Na-O2 batteries, where the discharge products(NaO2, Na2O2, Na2O2·H2O, or mixtures) vary significantly with the operating conditions, KO2 with higher stability(ΔGr of KO2: −239.4 kJ/mol) has been identified as the sole discharge product in K-O2 batteries[15,17]. A recent review has systematically summarized the characteristics and advantages of K-O2 batteries[18], and emphasized that K-O2 batteries are the only system that does not produce 1O2, which reduces the parasitic reactions related to electrolyte/electrode decomposition. Therefore, K-O2 batteries offer unique advantages in the family of superoxide-based metal-O2 batteries. Although the concept of superoxide-based batteries with high round-trip efficiency has been demonstrated in K-O2 batteries, continuous capacity decline and limited cycle life are still observed. This is closely related to the formation and decomposition of KO2, which usually depend on the operating conditions(such as electrolyte and current density) [19]. As reported by Lu et al.[20], compared with a weak electron-donating solvent, diethylene glycol dimethyl ether(DEGDME), the strong electron-donating solvent dimethyl sulfoxide(DMSO) can realize faster electrode kinetics and higher electrochemical reversibility of K-O2 batteries. This result is in accordance with that in Na-O2 batteries, where solvents play a crucial role on the formation and decomposition of NaO2 species[21,22]. For Na-O2 batteries, studies also indicated that the properties of discharge products vary greatly with the used cathode, thereby influencing the electrochemical performance of batteries[23—25]. However, current investigations on K-O2 batteries mainly focus on K anode protection and electrolyte regulation to address the high activity of K metal anodes[26—29]. The influence of the types and characteristics of carbon materials on the crystal growth and decomposition of KO2 still remains ambiguous. Due to the high solubility of KO2 in organic electrolytes and the solution growth mechanism, oxygen cathodes should have great impact on K-O2 batteries[30,31]. Rational design of carbon-based oxygen electrodes is expected to realize facile formation and decomposition of KO2 and maximize the battery performance. In this work, we proposed and fabricated a hierarchical porous carbon nanotube sphere(CNTS) electrode to unlock the Received December 14, 2020 Accepted January 15, 2021 © Jilin University, The Editorial Department of Chemical Research in Chinese Universities and Springer-Verlag GmbH