Abstract:1135 Objectives: Clinical SPECT systems suffer fundamental limitations of low resolution (1~2 cm) and low sensitivity (0.01%~0.02%) from mechanical collimators. To overcome this limit, we propose an innovative self-collimating SPECT design concept. With a multi-layer interspaced mosaic detector (MATRICES) architecture, the spatially distributed sensitive scintillators play the role of collimation instead of absorptive heavy-metal materials. This design concept breaks away from the interdependency of resolution and sensitivity of a conventional SPECT system and simultaneously improves both features. In this work, we propose a modular self-collimating clinical SPECT system design and evaluate its performance through numerical simulations. Methods: The self-collimating SPECT system consists of 6 MATRICES detector heads that form a hexagon with an 800-mm bore size. Each MATRICES detector head has 4 scintillator layers on behind of a high opening ratio (4%) metal plate. The 3 scintillator layers in the middle consist of 75 (tangential) × 37 (axial) GAGG(Ce) crystals with a size of 4.0 mm (tangential) × 4.0 mm (axial) × 6.0 mm (radial). The space between neighboring scintillators is also 4.0 mm (tangential) × 4.0 mm (axial), i.e. the scintillators are interspaced that forms a mosaic pattern. The outermost scintillator layers consist of 150 × 75 GAGG(Ce) crystals with the same size. There is no gap between neighboring scintillators in this layer. We developed a numerical simulation program for system matrix derivation with multi-ray-tracing method. The simulated system has a FOV size of 500 mm (∅) × 300 mm(L) with a voxel size of 0.5 mm × 0.5 mm × 0.5 mm. We simulated a uniform cylindrical source across the FOV to measure the detection efficiency. We evaluated the resolution performance with a planar hot rod phantom. It consists of 6 sectors of hot rods with diameters of 1.25, 1.5, 1.75, 2.0, 2.5 and 3.0 mm respectively. We also simulated a contrast phantom study with 6 hot sphere inserts (1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively in diameters) in a 50 mm (∅) × 10 mm (L) cylinder with a warm-background. The concentration ratio of all the hot spheres to the background is 5:1. We define the contrast-to-noise ratio (CNR) to quantitatively evaluate image quality. Projection data for phantom study at different counts levels were generated using forward projection and through sampling Poisson noise. OS-EM algorithm was used for image reconstruction with 300 subsets. We ran the reconstruction until convergence and then performed post-filtering with an empirically chosen Gaussian filter. Results: The peak and average detection efficiency in the full FOV is 0.54% and 0.47% respectively. The planar hot rod phantom study shows that the best achievable trans-axial image resolution is 1.25 mm in noise-free condition and 2.5 mm with 2.6 mCi Tc99m total activity and 5 min scan time. The smallest visible hot sphere in the contrast phantom study is 1.5 mm with a total activity of 2.6 mCi and 100 min scan. With 5 min acquisition, the 3.0 mm hot sphere is clearly visible. Conclusions: The preliminary result shows that the proposed self-collimating MATRICES SPECT design has the potential to yield superb whole-body imaging performance in terms of simultaneous, order-of-magnitude improvement of resolution and sensitivity, as well as excellent image contrast-to-noise performance. It is reasonable to expect a strong clinical application advancement with the self-collimating SPECT technology. Further investigations are on-going to fully characterize the system performance with Monte-Carlo simulations. Research Support: This research was supported by the National Natural Science Foundation of China (No. 81727807), National Key Research and Development (R&D) Plan of China (Grant ID. 2019YFF0302503) and Tsinghua University Initiative Scientific Research Program.

A New Multi-Parallel-Beam Collimators with Improved Sensitivity for Spect

Simulation Study of Multi-parallel Beam Collimator

A Feasibility Study of Multiplexing Parallelbeam

A Compensation Performance of the Multiplexing Parallel Beam Collimator Sensitivity

The Contrast Study of Multi-parallel Beam Collimator by MC Simulation

Characteristics of multiplexing parallel beam (MPB) by using Monte Carlo simulation

A combined half-cone beam and parallel hole collimation system for SPECT brain imaging

Multi-resolution multi-sensitivity design for parallel-hole SPECT collimators

Spectral Multiplexing Multi-Pinhole Collimator Design forHigh Sensitivity Small Animal SPECT

Design and evaluation of an adaptive multipinhole collimator for high-performance clinical and preclinical imaging

Characterization and Assessment of Projection Probability Density Function and Enhanced Sampling in Self-Collimation SPECT.

Three-dimensional SPECT reconstruction of combined cone beam and parallel beam data

Brain SPECT with short focal-length cone-beam collimation

Optimization of convergent collimators for pixelated SPECT systems

Monte carlo simulation study of a novel parallel-hole collimator with a CdTe pixelated semiconductor SPECT system

High Sensitivity Collimators for Optimising Lesion Detection in SPECT Images

SPECT reconstruction of combined cone beam and parallel hole collimation with experimental data

Design and evaluation of two multi-pinhole collimators for brain SPECT

Review of SPECT collimator selection, optimization, and fabrication for clinical and preclinical imaging

Design and Simulations of a Self-Collimating Whole-Body SPECT System