Abstract:Rock strength criteria are the theoretical grounding of geotechnical design and stability estimation, the Mohr–Coulomb (MC) and Hoek–Brown (HB) criteria are the widely accepted criteria at present, due to their reasonability and unambiguous concept, however they overlook the effect of intermediate principal stress, and contain six singular corners in π plane. Aimed at overcoming those limitations, the MC and normal parabolic criterion (NPC) were improved to their 3D versions that lead to smooth and convex for a wide range of strength parameters. The extended 3D strength criteria coincide with corresponding original forms in the triaxial compression and triaxial extension states, which not only take intermediate principal stress into account, but also provide great convenient in numerical calculation. Multigroup of poly-axial strength datasets gathered from the references are used to check the prediction accuracy of the proposed 3D criteria by the least absolute deviation method. Research proved that the 3D NPC criterion has a relatively larger deviation on poly-axial strength data prediction, but the proposed 3D MC criterion can describe peak strength with low misfit for soft or hard rocks. Peak strength σ 1 increases first and then decreases with the increase of σ 2 , whether increasing or decreasing σ 2 , both will result in rock failure. Moreover, the 3D MC can fit the poly-axial strength data well for lower or higher values of σ 3 , which strongly suggests the proposed 3D MC criterion is adequate. Applicability of the proposed strength criterion will be discussed in further research.

Study on the three-dimensional critical state for geomaterials

Unified Characteristics Line Theory of Spacial Axisymmetric Plastic Problem

Modified Duncan-Chang Model Considering Physical Properties of Saturated Clays

Non-linear Constitutive Model for Geomaterials under Complicated Stress State

Unified Three-Dimensional Revision of Modified Cam Clay Model

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

Study of Failure Criterion for Hangzhou Intact Soft Clay under Complex Stress Path

A new three-dimensional rock strength criterion based on shape function in deviatoric plane

DETERMINATION OF DYNAMIC STRENGTH PARAMETERS OF GEOMATERIALS BASED ON UNIFIED STRENGTH THEORY

Study of slope stability analysis method based on equivalent Mohr‐Coulomb strength parameters of three‐dimensional stress state

A nonlinear constitutive model for soil under complex stress state

A Simplified Three-Dimensional Extension of Hoek-Brown Strength Criterion

The modification of Mohr-Coulomb criteria based on shape function and determination method of undetermined parameters

Study on statistical damage constitutive model of soft rock based on unified strength theory

Mechanical Properties and Constitutive Model of Artificial Frozen Sandy Soils under True Triaxial Stress State Conditions

Experimental Study of Silty Clay Plane Strain Tri-axial Test under RTC Path and Modified Cam-clay Model

Analysis of influence of discontinuous plane on strength of rock mass based on unified strength theory

Effect of Intermediate Principal Stress on Strength of Soft Rock under Complex Stress States

A Modified 3D G-criterion for the Prediction of Crack Propagation under Mixed Mode I-III Loadings

Retrospective and prospective review of the generalized nonlinear strength theory for geomaterials

Experimental Study of the Triaxial Strength Properties of Hollow Cylindrical Granite Specimens under Coupled External and Internal Confining Stresses