Highly Efficient Visible-Light-driven Oxygen-Vacancy-based Cu2+1O Micromotors with Biocompatible Fuels

Qinglong Wang,Renfeng Dong,Qianxian Yang,Jiajia Wang,Shuyu Xu,Yuepeng Cai

DOI: https://doi.org/10.1039/c9nh00592g

2020-01-01

Nanoscale Horizons

Abstract:Oxygen vacancy-based Cu2+1O micromotors with highly enhanced propulsion in biocompatible fuels (pure water and super low concentration tannic acid) under low energy multispectral light (blue to red).

What problem does this paper attempt to address?

Glucose-Fueled Micromotors with Highly Efficient Visible-Light Photocatalytic Propulsion

Qinglong Wang,Renfeng Dong,Chun Wang,Shuyu Xu,Decheng Chen,Yuying Liang,Biye Ren,Wei Gao,Yuepeng Cai

DOI: https://doi.org/10.1021/acsami.8b17563

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Synthetic micro/nanomotors fueled by glucose are highly desired for numerous practical applications because of the biocompatibility of their required fuel. However, currently all of the glucose-fueled micro/nanomotors are based on enzyme-catalytic-driven mechanisms, which usually suffer from strict operation conditions and weak propulsion characteristics that greatly limit their applications. Here, we report a highly efficient glucose-fueled cuprous oxide@N-doped carbon nanotube (Cu2O@N-CNT) micromotor, which can be activated by environment-friendly visible-light photocatalysis. The speeds of such Cu2O@N-CNT micromotors can reach up to 18.71 μm/s, which is comparable to conventional Pt-based catalytic Janus micromotors usually fueled by toxic H2O2 fuel. In addition, the velocities of such motors can be efficiently regulated by multiple approaches, such as adjusting the N-CNT content within the micromotors, glucose concentrations, or light intensities. Furthermore, the Cu2O@N-CNT micromotors exhibit a highly controllable negative phototaxis behavior (moving away from light sources). Such motors with outstanding propulsion in biological environments and wireless, repeatable, and light-modulated three-dimensional motion control are extremely attractive for future practical applications.
Visible Light-Driven Micromotors in Fuel-Free Environment with Promoted Ion Tolerance

Huaide Jiang,Xiaoli He,Ming Yang,Chengzhi Hu

DOI: https://doi.org/10.3390/nano13121827

IF: 5.3

2023-06-08

Nanomaterials

Abstract:Light-driven electrophoretic micromotors have gained significant attention recently for applications in drug delivery, targeted therapy, biosensing, and environmental remediation. Micromotors that possess good biocompatibility and the ability to adapt to complex external environments are particularly attractive. In this study, we have fabricated visible light-driven micromotors that could swim in an environment with relatively high salinity. To achieve this, we first tuned the energy bandgap of rutile TiO2 that was hydrothermally synthesized, enabling it to generate photogenerated electron-hole pairs under visible light rather than solely under UV. Next, platinum nanoparticles and polyaniline were decorated onto the surface of TiO2 microspheres to facilitate the micromotors swimming in ion-rich environments. Our micromotors exhibited electrophoretic swimming in NaCl solutions with concentrations as high as 0.1 M, achieving a velocity of 0.47 μm/s without the need for additional chemical fuels. The micromotors’ propulsion was generated solely by splitting water under visible light illumination, therefore offering several advantages over traditional micromotors, such as biocompatibility and the ability to operate in environments with high ionic strength. These results demonstrated high biocompatibility of photophoretic micromotors and high potential for practical applications in various fields.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Graphene oxide induced enhancement of light-driven micromotor with biocompatible fuels

Qianxian Yang,Houyang Xu,Hantao Wen,He Zhao,Xiaoya Liu,Yuepeng Cai,Hong Wang,Renfeng Dong

DOI: https://doi.org/10.1016/j.apmt.2021.100943

IF: 8.663

2021-01-01

Applied Materials Today

Abstract:A highly efficient light-driven cuprous oxide @ graphene oxide (Cu2O@GO) micromotor which can be propelled with various biocompatible fuels is described. The Cu2O@GO micromotors, which achieve enhanced photocatalytic performance by doping Cu2O with GO, can be efficiently propelled by visible light and even near infrared light. Compared with conventional plain Cu2O micromotors, which can only be driven by visible light, the Cu2O@GO micromotors show more than 3 times faster speeds under the full range of visible light with biocompatible glucose fuel. In addition, due to the GO-induced enhanced photocatalytic performance and local photoinduced thermal effects, such motors can be powered by NIR with a series of biocompatible fuels, such as glucose, leucine, and urea solutions, with speeds reaching up to 11.39 mu m s(-1) (in glucose), which extends the excitation wavelength of photocatalytic micromotors to near-infrared light. This novel strategy of improving the performance of light-driven micromotors via GO doping has opened up a new and attractive path for the preparation of micromotors with potential applications in biological environments. (C) 2021 Elsevier Ltd. All rights reserved.
Carbon‐Dot‐Induced Acceleration of Light‐Driven Micromotors with Inherent Fluorescence

Jiajia Wang,Huiying Wu,Xiaoya Liu,Qiying Liang,Zijun Bi,Zicheng Wang,Yuepeng Cai,Renfeng Dong

DOI: https://doi.org/10.1002/aisy.201900159

IF: 7.298

2020-01-01

Advanced Intelligent Systems

Abstract:Real‐time visualization of the positions of micro/nanomotors is highly desired for practical applications due to the complex environments that they are used in. However, most reported photocatalytic micromotors can only be tracked in transparent solutions under bright fields, which greatly limits their applications. Herein, photocatalytic micromotors based on Cu2O@carbon dot (CDot) particles with excellent fluorescent properties and precise propulsion capabilities in 3D are reported. In the fully green environment of malic acid, the Cu2O@CDot micromotors display efficient propulsion under visible light irradiation (as high as 40.85 μm s−1). In addition, the propulsion direction of the Cu2O@CDot micromotors can be effectively adjusted by changing the direction of light via positive phototaxis. Interestingly, due to the presence of CDots, these new Cu2O@CDot micromotors display excellent and stable fluorescence. This study reports the first photocatalytic micromotors with both novel fluorescence properties and excellent propulsion characteristics in biocompatible environments. Due to their excellent fluorescent properties and precise motion control, these Cu2O@CDot micromotors hold great potential to perform complex tasks across diverse practical applications.
Adaptive Cu2O Micromotors with Ph-Responsive Phototaxis Reversal

Haixin Tan,Bin Chen,Meihuan Liu,Jiamiao Jiang,Juanfeng Ou,Lu Liu,Fei Wang,Yicheng Ye,Junbin Gao,Jia Sun,Fei Peng,Yingfeng Tu

DOI: https://doi.org/10.1016/j.cej.2022.137689

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Light-driven micro/nanomotors have made enormous progress in various practical applications owing to their excellent controllability and programmability. However, it is still far from real intellectualization. Herein we demonstrate the successful fabrication of hollow cuprous oxide (Cu2O) micromotors with autonomous phototaxis reversal behavior by in-situ sensing the local pH change of surrounding environment without altering the lighting direction. The fabricated motors exhibit excellent and controllable propulsion under low-strength visible light illumination (1100 LUX) due to faster charge separation between different facets of the crosslinked polyhedral Cu2O microstructures. Intriguingly, our Cu2O micromotors are possible to respond smartly to the local pH gradient and reverse from negative to positive phototaxis, therefore the motors are capable of evacuating automatically after mission. We envision that such adaptive micromotor with great intellectualization via responding autonomously to the local stimuli shows great promise in various applications especially biomedical scenarios.
Highly Efficient Light-Driven TiO2-Au Janus Micromotors.

Renfeng Dong,Qilu Zhang,Wei Gao,Allen Pei,Biye Ren

DOI: https://doi.org/10.1021/acsnano.5b05940

IF: 17.1

2016-01-01

ACS Nano

Abstract:A highly efficient light-driven photocatalytic TiO2-Au Janus micromotor with wireless steering and velocity control is described. Unlike chemically-propelled micromotors which commonly require the addition of surfactants or toxic chemical fuels, the fuel-free Janus micromotor (diameter ~1.0 μm) can be powered in pure water under an extremely low ultraviolet light intensity (2.5×10-3 W/cm2), and with 40×10-3 W/cm2, they can reach a high speed of 25 body length/s which is comparable to common Pt-based chemically-induced self-electrophoretic Janus micromotors. The photocatalytic propulsion can be switched on and off by incident light modulation. In addition, the speed of the photocatalytic TiO2-Au Janus micromotor can be accelerated by increasing the light intensity or by adding low concentrations of chemical fuel H2O2 (i.e., 0.1%). The attractive fuel-free propulsion performance, fast movement triggering response, low light energy requirement and precise motion control of the TiO2-Au Janus photo-catalytic micromotor hold considerable promise for diverse practical applications.
Visible-Light-Driven Bioi-Based Janus Micromotor in Pure Water

Renfeng Dong,Yan Hu,Yefei Wu,Wei Gao,Biye Ren,Qinglong Wang,Yuepeng Cai

DOI: https://doi.org/10.1021/jacs.6b09863

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Light-driven synthetic micro-/nanomotors have attracted considerable attention due to their potential applications and unique performances such as remote motion control and adjustable velocity. Utilizing harmless and renewable visible light to supply energy for micro-/nanomotors in water represents a great challenge. In view of the outstanding photocatalytic performance of bismuth oxyiodide (BiOI), visible-light-driven BiOI-based Janus micromotors have been developed, which can be activated by a broad spectrum of light, including blue and green light. Such BiOI-based Janus micromotors can be propelled by photocatalytic reactions in pure water under environmentally friendly visible light without the addition of any other chemical fuels. The remote control of photocatalytic propulsion by modulating the power of visible light is characterized by velocity and mean-square displacement analysis of optical video recordings. In addition, the self-electrophoresis mechanism has been confirmed for such visible-light-driven BiOI-based Janus micromotors by demonstrating the effects of various coated layers (e.g., Al2O3, Pt, and Au) on the velocity of motors. The successful demonstration of visible-light-driven Janus micromotors holds a great promise for future biomedical and environmental applications.
Quantum Dot-Based Micromotors with NIR-I Light Photocatalytic Propulsion and NIR-II Fluorescence

Jiajia Wang,Li,Ruyi Wei,Renfeng Dong

DOI: https://doi.org/10.1021/acsami.2c13254

IF: 9.5

2022-01-01

ACS Applied Materials & Interfaces

Abstract:Here, we report the first PbS quantum dot (QD)-based micromotors with NIR-I light-driven photocatalytic propulsion and NIR-II fluorescence. Under the irradiation of NIR-I light (808 nm), PbS QD-doped cuprous oxide (Cu2O@PbS) micromotors can display efficient propulsion in a variety of biocompatible fuels such as malic acid, glucose, and urea. Among them, the Cu2O@PbS micromotors exhibit the best propulsion performance in a very low concentration of malic acid, with an average speed as high as 11.86 μm/s. The enhanced NIR-I photocatalytic activity of Cu2O@PbS micromotors benefits from the doping of NIR-I PbS QDs that can be excited by NIR-I light and exhibit high electron transport efficiency. The doped PbS QDs can effectively increase the absorption efficiency of the micromotors in the NIR-I region while also inhibiting the recombination of photogenerated electron-hole pairs. Interestingly, due to the presence of NIR PbS QDs, the Cu2O@PbS micromotors demonstrate prominent and stable NIR-II fluorescence (emission wavelength: 1100 nm), which offer promising potential for visualization of their position in vivo. In comparison to other photocatalytic micromotors, the simple fabrication strategy, excellent NIR-II fluorescence, together with the NIR-I light-dependent propulsion behavior of the current Cu2O@PbS micromotors, thus pave the way for further development of advanced smart "robots" for intelligent biomedical applications.
Visible-Light-Driven Water-Fueled Ecofriendly Micromotors Based on Iron Phthalocyanine for Highly Efficient Organic Pollutant Degradation

Jintao Tong,Dalei Wang,Danchen Wang,Fei Xu,Ruomeng Duan,Dafeng Zhang,Jian Fan,Bin Dong

DOI: https://doi.org/10.1021/acs.langmuir.9b02479

IF: 3.9

2019-01-01

Langmuir

Abstract:The light-driven micromotor has been demonstrated to have great potential in the environmental remediation field. However, it is still challenging to develop highly efficient, ecofriendly, and visible-light-powered micromotors for organic pollutant degradation. In this paper, we report an ecofriendly micromotor based on iron phthalocyanine (FePc) and gelatin, which exhibits the visible-light-driven self-propulsion behavior using water fuel based on the photocatalytic reaction and self-diffusiophoresis mechanism. Fast motion behavior is observed which induces the rapid agitation of the solution. This, together with the excellent photocatalytic activity, makes the FePc-based micromotor highly efficient when utilized in the degradation of organic pollutants with a normalized reaction rate constant of 2.49 × 10-2 L m-2 s-1, which is by far the fastest and is far superior than the stationary counterpart. The external fuel-free propulsion and the high efficiency in pollutant degradation make the current micromotor potentially attractive for environmental remediation.
Highly efficient visible-light-driven Cu<sub>2</sub>O@CdSe micromotors adsorbent

Xiao Chen,Xiaoyong Ding,Yilin Liu,Jing Li,Wenjuan Liu,Xiaolong Lu,Zhongwei Gu

DOI: https://doi.org/10.1016/j.apmt.2021.101200

IF: 8.663

2021-01-01

Applied Materials Today

Abstract:Micro/nanomotors have attracted extensive attentions in aquatic environmental remediation, but the random motion and uncontrollability restricts the precise location and timely adjustment in micro environmental remediation, such as in microchannels and microwells. Herein, we demonstrated visible light-driven cadmium sulfide quantum dots doped cuprous oxide (Cu2O@CdSe) micromotors adsorbent with excellent removability to cationic dye, in along with effective motion regulation. The Cu2O@CdSe micromotors adsorbent with type II heterostructure was fabricated by simple in-situ deposition and exhibited outstanding motion controllability and instant response under visible light illumination. The existence of a staggered gap between Cu2O and CdSe formed a heterojunction, effectively inhibiting recombination of photogenerated electron-hole pairs and improving photocatalytic activity of Cu2O@CdSe micromotors. Negative phototactic self-propulsion with maximum speed to similar to 42.3 mu m/s was achieved in biological environments because of the formation of the asymmetric chemical concentration gradient around the motors. Additionally, by modulating the direction and on/off state of asymmetric light field, it is capable of steering motor moving with multiple controllable modes, such as horizontal, vertical, stop/go and patterned propulsion, which will facilitate the on-demand orientation once in the complex microchannel. Furthermore, the capability of Cu2O@CdSe micromotors adsorbent is confirmed with a rapid adsorption rate of 96% on methyl blue after 10 min. Additionally, the stability of micromotors is evaluated. Although with inevitable oxidation or photocorrosion for all Cu2O micromotor, the strong adsorption ability is promised with 5 times recycling in low concentration of dye solution. Such attractive micromachines with boosted motility and lower production cost hold a considerable promise for a complex environmental remediation. (C) 2021 Elsevier Ltd. All rights reserved.
A Review of Fast Bubble-Driven Micromotors Powered by Biocompatible Fuel: Low-Concentration Fuel, Bioactive Fluid and Enzyme

Qingjia Chi,Zhen Wang,Feifei Tian,Ji’an You,Shuang Xu

DOI: https://doi.org/10.3390/mi9100537

IF: 3.4

2018-10-22

Micromachines

Abstract:Micromotors are extensively applied in various fields, including cell separation, drug delivery and environmental protection. Micromotors with high speed and good biocompatibility are highly desirable. Bubble-driven micromotors, propelled by the recoil effect of bubbles ejection, show good performance of motility. The toxicity of concentrated hydrogen peroxide hampers their practical applications in many fields, especially biomedical ones. In this paper, the latest progress was reviewed in terms of constructing fast, bubble-driven micromotors which use biocompatible fuels, including low-concentration fuels, bioactive fluids, and enzymes. The geometry of spherical and tubular micromotors could be optimized to acquire good motility using a low-concentration fuel. Moreover, magnesium- and aluminum-incorporated micromotors move rapidly in water if the passivation layer is cleared in the reaction process. Metal micromotors demonstrate perfect motility in native acid without any external chemical fuel. Several kinds of enzymes, including catalase, glucose oxidase, and ureases were investigated to serve as an alternative to conventional catalysts. They can propel micromotors in dilute peroxide or in the absence of peroxide.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Dual-Mode-Driven Micromotor Based on Foam-like Carbon Nitride and Fe3O4 with Improved Manipulation and Photocatalytic Performance

Kai Feng,Jiang Gong,Jinping Qu,Ran Niu

DOI: https://doi.org/10.1021/acsami.2c10590

2022-10-05

Abstract:Micro/nanomotors have emerged as a vibrant research topic in biomedical and environmental fields due to their attractive self-propulsion as well as small-scale functionalities. However, single actuated micro/nanomotors are not adaptive in facing intricate natural and industrial environments. Herein, we propose a new dual-mode-driven micromotor based on foam-like carbon nitride (f-C3N4) with precipitated Fe3O4 nanoparticles, namely, Fe3O4/f-C3N4, powered by chemical/magnetic stimuli for rapid reduction of organic pollutants. The Fe3O4/f-C3N4 motor composed of a three-dimensional (3D) porous "foam-like" structure and precipitated Fe3O4 nanoparticles (ca. 50 nm) not only exhibits efficient photocatalytic performance under visible light but also shows versatile and programmable motion behavior under the control of external magnetic fields. The aggregation of the micromotor under an external rotating magnetic field further enhances the catalytic activity by the increased local catalyst concentration. Furthermore, the magnetic property endows the micromotor with easy recyclability. This study provides a novel dual-mode-driven micromotor for antibiotics removal with magnetic field and light-enhanced performance in industrial wastewater treatment at a low cost.
Visible Light Driven Recyclable Micromotors for “On-the-fly” Water Remediation

Ziheng Zhan,Fanan Wei,Jianghong Zheng,Chao Yin,Wenguang Yang,Ligang Yao,Songsong Tang,Dong Liu

DOI: https://doi.org/10.1016/j.matlet.2019.126825

IF: 3

2020-01-01

Materials Letters

Abstract:Organic pollutant, originating from both industry and domestic waste, has been greatly threatening the waters all over the world. Micromotors, integrated with photocatalysis, provide a promising solution to this critical challenge. In this work, by taking advantage of the positive motion of the micromotors and visible light response of photocatalysis, we fabricated BiOI microspheres based micromotors and applied them into organic pollutant removal in water. The motion characterization and dye degradation tests demonstrate that "on-the-fly" water remediation is realized under visible light irradiation. What's more, with the iron oxide nanoparticles embedded, the micromotors are recycled using magnet and reused in organic pollutant degradation. (C) 2019 Elsevier B.V. All rights reserved.
Chemical/Light Powered Hybrid Micromotors with 'On-the-Fly' Optical Brakes.

Chuanrui Chen,Songsong Tang,Hazhir Teymourian,Emil Karshalev,Fangyu Zhang,Jinxing Li,Fangzhi Mou,Yuyan Liang,Jianguo Guan,Joseph Wang

DOI: https://doi.org/10.1002/anie.201803457

2018-01-01

Abstract:Hybrid micromotors capable of both chemically powered propulsion and fuel-free light-driven actuation and offering built-in optical brakes for chemical propulsion are described. The new hybrid micromotors are designed by combining photocatalytic TiO2 and catalytic Pt surfaces into a Janus microparticle. The chemical reactions on the different surfaces of the Janus particle hybrid micromotor can be tailored by using chemical or light stimuli that generate counteracting propulsion forces on the catalytic Pt and photocatalytic TiO2 sides. Such modulation of the surface chemistry on a single micromotor leads to switchable propulsion modes and reversal of the direction of motion that reflect the tuning of the local ion concentration and hence the dominant propulsion force. An intermediate Au layer (under the Pt surface) plays an important role in determining the propulsion mechanism and operation of the hybrid motor. The built-in optical braking system allows "on-the-fly" control of the chemical propulsion through a photocatalytic reaction on the TiO2 side to counterbalance the chemical propulsion force generated on the Pt side. The adaptive dual operation of these chemical/light hybrid micromotors, associated with such control of the surface chemistry, holds considerable promise for designing smart nanomachines that autonomously reconfigure their propulsion mode for various on-demand operations.
Confined Tri‐Functional FeO X @mno 2 @sio 2 Flask Micromotors for Long‐Lasting Motion and Catalytic Reactions

Yangyang Yang,Lei Shi,Jingkai Lin,Panpan Zhang,Kunsheng Hu,Shuang Meng,Peng Zhou,Xiaoguang Duan,Hongqi Sun,Shaobin Wang

DOI: https://doi.org/10.1002/smll.202207666

IF: 13.3

2023-01-01

Small

Abstract:H2 O2 -fueled micromotors are state-of-the-art mobile microreactors in environmental remediation. In this work, a magnetic FeOx @MnO2 @SiO2 micromotor with multi-functions is designed and demonstrated its catalytic performance in H2 O2 /peroxymonosulfate (PMS) activation for simultaneously sustained motion and organic degradation. Moreover, this work reveals the correlations between catalytic efficiency and motion behavior/mechanism. The inner magnetic FeOx nanoellipsoids primarily trigger radical species (• OH and O2•- ) to attack organics via Fenton-like reactions. The coated MnO2 layers on FeOx surface are responsible for decomposing H2 O2 into O2 bubbles to provide a propelling torque in the solution and generating SO4•- and • OH for organic degradation. The outer SiO2 microcapsules with a hollow head and tail result in an asymmetrical Janus structure for the motion, driven by O2 bubbles ejecting from the inner cavity via the opening tail. Intriguingly, PMS adjusts the local environment to control over-violent O2 formation from H2 O2 decomposition by occupying the Mn sites via inter-sphere interactions and enhances organic removal due to the strengthened contacts and Fenton-like reactions between inner FeOx and peroxides within the microreactor. The findings will advance the design of functional micromotors and the knowledge of micromotor-based remediation with controlled motion and high-efficiency oxidation using multiple peroxides.
Recent advancements in Mg-based micromotors for biomedical and environmental applications

Yue Wang,Boyu Qin,Sihan Gao,Xuanchun Wang,Hongyue Zhang,Zhiguang Wu,yue wang

DOI: https://doi.org/10.1039/d3tb02339g

IF: 7.571

2023-01-01

Journal of Materials Chemistry B

Abstract:Synthetic micro/nanomotors have attracted considerable attention due to their promising potential in the field of biomedicine. Despite these great potentials, the propulsions of major micromotors requires chemical fuels or complex...

materials science, biomaterials
Multiwavelength Phototactic Micromotor with Controllable Swarming Motion for "Chemistry-on-the-fly".

Yang Hu,Wei Liu,Yan Sun

DOI: https://doi.org/10.1021/acsami.0c11443

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Artificial nano/micromotors that represent the next-generation automotive microdevices hold considerable promise in various potential applications. However, it is a great challenge to design light-powered micro/nanomotors with effective propulsion that can fulfill diverse tasks. Herein, a multilight-responsive micromotor is fabricated by in-situ precipitation of photothermal Fe3O4 nanoparticles (NPs) onto different microparticles. The composites exhibit phototactic swarming movement by irradiations at 320-550 nm, which can be reversibly and remotely manipulated by irradiation position, "on/off" switch and light intensity. The micromotor made of Fe3O4@poly(glycidyl methacrylate)/polystyrene core-shell particles (Fe3O4@PGS) presents a propulsion speed as high as 270 μm/s under UV irradiation. By using an array of experimental methods and numerical simulations, thermal convection mechanism is proposed for the propulsion. Namely, under light irradiations, the photogenerated heat on Fe3O4 NPs decreases the density of the irradiated spot, leading to the swarming motion of the composite particles propelled by a "hydrodynamic drag" toward the light spot. Then, Fe3O4@PGS is exploited as a platform for performing "chemistry-on-the-fly" using both the catalytic efficiency of Fe3O4 NPs and an immobilized enzyme (lipase). It is found that the propulsion increases the catalytic efficiency of Fe3O4 NPs for rhodamine B degradation by over 10 times under sunlight. Moreover, it is proved to accelerate the enzymatic reactions of lipase on Fe3O4@PGS in both aqueous and organic systems by more than 50%. Such a multiwavelength phototactic swimmer paves the way to the design of advanced micromotors for various applications, such as drug delivery, microsurgery, and sensing.
Light-controlled Propulsion, Aggregation and Separation of Water-Fuelled TiO2/Pt Janus Submicromotors and Their "On-the-fly" Photocatalytic Activities.

Fangzhi Mou,Lei Kong,Chuanrui Chen,Zhihong Chen,Leilei Xu,Jianguo Guan

DOI: https://doi.org/10.1039/c5nr06774j

IF: 6.7

2016-01-01

Nanoscale

Abstract:In this work, water-fuelled TiO2/Pt Janus submicromotors with light-controlled motions have been developed by utilizing the asymmetrical photocatalytic water redox reaction over TiO2/Pt Janus submicrospheres under UV irradiation. The motion state, speed, aggregation and separation behaviors of the TiO2/Pt Janus submicromotor can be reversibly, wirelessly and remotely controlled at will by regulating the "on/off" switch, intensity and pulsed/continuous irradiation mode of UV light. The motion of the water-fuelled TiO2/Pt Janus submicromotor is governed by light-induced self-electrophoresis under the local electrical field generated by the asymmetrical water oxidation and reduction reactions on its surface. The TiO2/Pt Janus submicromotors can interact with each other through the light-switchable electrostatic forces, and hence continuous and pulsed UV irradiation can make the TiO2/Pt Janus submicromotors aggregate and separate at will, respectively. Because of the enhanced mass exchange between the environment and active submicromotors, the separated TiO2/Pt Janus submicromotors powered by the pulsed UV irradiation show a much higher activity for the photocatalytic degradation of the organic dye than the aggregated TiO2/Pt submicromotors. The water-fuelled TiO2/Pt Janus submicromotors developed here have some outstanding advantages as "swimming" photocatalysts for organic pollutant remediation in the macro or microenvironment (microchannels and microwells in microchips) because of their small size, long-term stability, wirelessly controllable motion behaviors and long life span.
Confined Tri‐Functional FeOx@MnO2@SiO2 Flask Micromotors for Long‐Lasting Motion and Catalytic Reactions

Yangyang Yang,Lei Shi,Jingkai Lin,Panpan Zhang,Kunsheng Hu,Shuang Meng,Peng Zhou,Xiaoguang Duan,Hongqi Sun,Shaobin Wang

DOI: https://doi.org/10.1002/smll.202207666

IF: 13.3

2023-01-28

Small

Abstract:A magnetic FeOx@MnO2@SiO2 micromotor with multi‐functions is prepared and its excellence in sustained motion and catalytic degradation of pollutants is demonstrated. The correlations between catalytic efficiency and motion behavior as well as catalytic mechanisms in motion and pollutant degradation are also revealed. This work provides a new functionalized micromotor and practical application in peroxymonosulfate based oxidation. H2O2‐fueled micromotors are state‐of‐the‐art mobile microreactors in environmental remediation. In this work, a magnetic FeOx@MnO2@SiO2 micromotor with multi‐functions is designed and demonstrated its catalytic performance in H2O2/peroxymonosulfate (PMS) activation for simultaneously sustained motion and organic degradation. Moreover, this work reveals the correlations between catalytic efficiency and motion behavior/mechanism. The inner magnetic FeOx nanoellipsoids primarily trigger radical species (•OH and O2•−) to attack organics via Fenton‐like reactions. The coated MnO2 layers on FeOx surface are responsible for decomposing H2O2 into O2 bubbles to provide a propelling torque in the solution and generating SO4•− and •OH for organic degradation. The outer SiO2 microcapsules with a hollow head and tail result in an asymmetrical Janus structure for the motion, driven by O2 bubbles ejecting from the inner cavity via the opening tail. Intriguingly, PMS adjusts the local environment to control over‐violent O2 formation from H2O2 decomposition by occupying the Mn sites via inter‐sphere interactions and enhances organic removal due to the strengthened contacts and Fenton‐like reactions between inner FeOx and peroxides within the microreactor. The findings will advance the design of functional micromotors and the knowledge of micromotor‐based remediation with controlled motion and high‐efficiency oxidation using multiple peroxides.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Multifunctional glucose-powered nanomotors with robust dual enzyme mimic activities

Ziwei Lan,Tingting Li,Qiuning Li,Chenzhang Liu,Jia Li

DOI: https://doi.org/10.1016/j.seppur.2023.125860

IF: 8.6

2023-12-08

Separation and Purification Technology

Abstract:Catalytic micro-/nanomotors (MNMs) that use H 2 O 2 as fuel to generate O 2 bubbles for propulsion hold great promise for exciting applications in the biological and environmental fields. However, it is still a challenge to alleviate or avoid the negative impact of H 2 O 2 on the ecological environment of water body. Herein, a novel glucose-driven nanomotor with robust dual enzyme-like activities was prepared by precisely controlling the phase composition and enzyme immobilization to construct a 3D hierarchical structure integrating Fe-MOF, MnO 2 and glucose oxidase (GOx) on halloysite nanotube (HNTs) support. Embedding GOx into the framework of Fe-MOF by a simple one-step coprecipitation process allowed the in-situ generation of H 2 O 2 in the presence of glucose. Such H 2 O 2 could be further decomposed to O 2 bubbles to drive nanomotors. Meanwhile, O 2 bubbles and residual H 2 O 2 could convert to active species superoxide radical (O 2 • − ) and hydroxyl radical (•OH) due to the high peroxidase/oxidase-like activities of Fe-MOF/MnO 2 in nanomotors. As a proof of concept, the as-synthesized nanomotors could realize sensitively colorimetric detection of glutathione (GSH) with a detection limit of 9.3 × 10 −8 M. In particular, the nanomotors could also rapidly degrade tetracycline hydrochloride (TCH) under neutral conditions without additional H 2 O 2 . It is envisioned that the new strategy that combines strong enzyme-like activity with enhanced autonomous motion can promote the nanomotors efficiency for biomolecular sensing and environmental remediation.

engineering, chemical

Highly Efficient Visible-Light-driven Oxygen-Vacancy-based Cu2+1O Micromotors with Biocompatible Fuels

Glucose-Fueled Micromotors with Highly Efficient Visible-Light Photocatalytic Propulsion

Visible Light-Driven Micromotors in Fuel-Free Environment with Promoted Ion Tolerance

Graphene oxide induced enhancement of light-driven micromotor with biocompatible fuels

Carbon‐Dot‐Induced Acceleration of Light‐Driven Micromotors with Inherent Fluorescence

Adaptive Cu2O Micromotors with Ph-Responsive Phototaxis Reversal

Highly Efficient Light-Driven TiO2-Au Janus Micromotors.

Visible-Light-Driven Bioi-Based Janus Micromotor in Pure Water

Quantum Dot-Based Micromotors with NIR-I Light Photocatalytic Propulsion and NIR-II Fluorescence

Visible-Light-Driven Water-Fueled Ecofriendly Micromotors Based on Iron Phthalocyanine for Highly Efficient Organic Pollutant Degradation

Highly efficient visible-light-driven Cu<sub>2</sub>O@CdSe micromotors adsorbent

A Review of Fast Bubble-Driven Micromotors Powered by Biocompatible Fuel: Low-Concentration Fuel, Bioactive Fluid and Enzyme

Dual-Mode-Driven Micromotor Based on Foam-like Carbon Nitride and Fe3O4 with Improved Manipulation and Photocatalytic Performance

Visible Light Driven Recyclable Micromotors for “On-the-fly” Water Remediation

Chemical/Light Powered Hybrid Micromotors with 'On-the-Fly' Optical Brakes.

Confined Tri‐Functional FeO X @mno 2 @sio 2 Flask Micromotors for Long‐Lasting Motion and Catalytic Reactions

Recent advancements in Mg-based micromotors for biomedical and environmental applications

Multiwavelength Phototactic Micromotor with Controllable Swarming Motion for "Chemistry-on-the-fly".

Light-controlled Propulsion, Aggregation and Separation of Water-Fuelled TiO2/Pt Janus Submicromotors and Their "On-the-fly" Photocatalytic Activities.

Confined Tri‐Functional FeOx@MnO2@SiO2 Flask Micromotors for Long‐Lasting Motion and Catalytic Reactions

Multifunctional glucose-powered nanomotors with robust dual enzyme mimic activities