Abstract:China is a country that suffers a lot from the earthquake disaster. The major reason for the human death and property losses in earthquake is the collapse of the tall buildings. Hence, correct simulation for the failure modes and accurate prediction for the collapse of the tall buildings under earthquake disaster is very useful for studying the safety of buildings and evaluating losses during earthquakes[1]. However, a lot of simplifications must be carried out in the existing simulations to overcome the numerical problems because the grave nonlinearity exists when collapse happens. This may lead to the results away from a real phenomenon. In this study, a fiber model for reinforced concrete (RC) structures (referred as THUFIBER) is developed, which is based on the general-purpose finite element package of MSC.MARC that carries significant capacity of solving nonlinear problems. In this model, the concrete and the reinforcement inside the structural elements are modeled respectively with different fibers as shown in figure 1 so that the cyclic behavior of material can be properly simulated. Pushover and dynamic time-history analysis for a RC frame tall building are carried out to illustrate the capacity of the proposed model. And dynamic time-history analysis is emphasized in this paper to discuss the collapse modes of the structure. The results show that THUFIBER can simulate the collapse and failure process of the structure under the dynamic loads such as complicated seismic loads, including the softening and fracture behaviors of structural elements, and further the program shows good convergence in the non-linear cases. So THUFIBER has a strong and promising ability for nonlinear analysis including collapse numerical simulation. Figure 1 Section dicretization of the fiber model Figure 2 Simulation for the Collapse of the frame

Earthquake-induced collapse simulation of a super-tall mega-braced frame-core tube building

Collapse Simulation for a SuperTall Mega-braced Frame Core-tube Building

Collapse simulation of a super high-rise building subjected to extremely strong earthquakes

Collapse Simulation of RC High-Rise Building Induced by Extreme Earthquakes

Collapse simulation of reinforced concrete high-rise building induced by extreme earthquakes

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Analytical Study On Buckling Restrained Braced Composite Frames

Large-Scale Experimental Evaluation of Building System Response to Sudden Column Removal

Application of Earthquake-Induced Collapse Analysis in Design Optimization of A Supertall Building

Earthquake-Induced Failure Analysis of High-Rise Steel Buildings under Sequential Long-Duration Ground Motions

Numerical Simulation for the Progressive Collapse of Concrete Building due to Earthquake

Quantitative investigation on collapse margin of steel high-rise buildings subjected to extremely severe earthquakes

SEISMIC COLLAPSE RESISTANCE EVALUATION OF ONE SUPER-TALL BUILDING WITH DIFFERENT LATERAL FORCE RESISTING SYSTEMS

Collapse simulation of a typical super-tall RC frame-core tube building exposed to extreme fire

Development and application of a simplified model for the design of a super-tall mega-braced frame-core tube building

NUMERICAL MODELS FOR EARTHOUAKE INDUCED PROGRESSIVE COLLAPSE OF HIGH-RISE BUILDINGS

Simulation for the Collapse of RC Frame Tall Buildings under Earthquake Disaster

Progressive Collapse Analysis of a Typical Super-Tall Reinforced Concrete Frame-Core Tube Building Exposed to Extreme Fires

Collapse Analysis of High-Rise Steel Moment Frames Incorporating Deterioration Effects of Column Axial Force – Bending Moment Interaction

Modeling on Collapse Behaviour of High-Rise Concrete-Filled Steel Composite Frames under Over-Design Seismic Excitations

Novel Seismic–progressive Collapse Resilient Super-Tall Building System