Abstract:The removal of oil from the water surface is vital to protect the environment and living organisms against the threats posed by industrial oily wastewater and offshore oil spills. High cost, low efficiency, and environmental pollution limit the widespread use of the commercial methods of oil–water separation. In this study, the prewetting polypropylene-wood pulp fiber composite nonwoven fabric (PWNF) has been used in the gravity-driven separation of the oil–water mixture. The prewetting PWNF displayed superior underwater oleophobic properties, and the underwater kerosene contact angle was 137.65° ± 4.27°. The oil–water interfacial tension in the microchannels among the PWNF fibers prevented the oil from passing through the microchannels; however, it allowed the passage of water. The PWNF membrane maintained an excellent oil–water separation performance after repeated separation and long-term soaking cycles. The separation membrane maintained 75% and 50% of the initial separation performance after 40 repeat cycles and water immersion for more than 20 days, respectively. The separation rate of the PWNF membrane was also investigated as a function of salt solution concentration, temperature, and pH. Meanwhile, the influences of prewetting time, prewetting temperature, and different dyeing condition of the mixture on the separation rate were clarified. The destruction of the oil–water contact interface was suggested as the main failure mode of the developed PWNF separation membrane. The maximum kerosene height that the PWNF separation membrane could sustain was 800 mm. The obtained results confirmed that the PWNF separation membrane exhibited the high potential of widespread use in various environments for achieving efficient and stable separations, especially for the oily wastewater treatment.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12612?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12612</a>.(a) Measurement of the mechanical (tensile) properties of PWNF, (b) measurement of the underwater–oil contact angle on the prewetting PWNF, (c) ultrasonic cleaning treatment for the improvement of the separation rate, (d) the preparation of the acidic and alkaline solutions, (e) separation trials using oil−water mixtures with different dyeing conditions, (f) finite element analysis of the failure modes of the PWNF separation membrane, and (d) the videos of the oil–water separation process (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12612/suppl_file/am0c12612_si_001.pdf">PDF</a>)Movie S1 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12612/suppl_file/am0c12612_si_008.mp4">MP4</a>)Movie S2 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12612/suppl_file/am0c12612_si_009.mp4">MP4</a>)Movie S3 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12612/suppl_file/am0c12612_si_010.mp4">MP4</a>)Movie S4 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12612/suppl_file/am0c12612_si_011.mp4">MP4</a>)Movie S5 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12612/suppl_file/am0c12612_si_012.mp4">MP4</a>)This article has not yet been cited by other publications.

A Prewetting Induced Underwater Superoleophobic or Underoil (super) Hydrophobic Waste Potato Residue-Coated Mesh for Selective Efficient Oil/water Separation

Highly Biocompatible, Underwater Superhydrophilic and Multifunctional Biopolymer Membrane for Efficient Oil–Water Separation and Aqueous Pollutant Removal

Prewetting Polypropylene-Wood Pulp Fiber Composite Nonwoven Fabric for Oil–Water Separation

Robust Photopolymerized Superoleophobic/Superhydrophilic Mesh for Oil-Water Separation

Dually Prewetted Underwater Superoleophobic and under Oil Superhydrophobic Fabric for Successive Separation of Light Oil/Water/Heavy Oil Three-Phase Mixtures.

Polyphenylene Sulfide Microfiber Membrane with Superhydrophobicity and Superoleophilicity for Oil/water Separation

PDMS mesh with reversible super-wettability for oil/water separation

Fabrication of Superhydrophobic Electrospun Polyimide Nanofibers Modified with Polydopamine and Polytetrafluoroethylene Nanoparticles for Oil–water Separation

Facile fabrication of hydrophilic-underwater superoleophobic poly(N-isopropylacrylamide) coated PP/LPET nonwoven fabrics for highly efficient oil/water separation

Durable superhydrophobic and superoleophilic electrospun nanofibrous membrane for oil-water emulsion separation.

A Facile Method to Fabricate Supramolecular Polyurea Hydrogel Coated Mesh with Long-Term Stable Underwater Superoleophobicity for Oil/water Separation

A stable underwater superoleophobic membrane constructed by CuO oriented rods and PAA water-adsorbent resin for fast and high efficient oil-water separation

Polypyrrole Coated Membranes with Tunable Surface Wettability for Effective Oil-Water Separation by Chemical Oxidation

Superhydrophobic PCTFE-based Microporous Membrane for Water/Oil Emulsion Separation in Various Environments

Robust superhydrophilic and underwater superoleophobic membrane optimized by Cu doping modified metal-organic frameworks for oil-water separation and water purification

Environment-Friendly Superhydrophobic Sponge for Highly Efficient Oil/Water Separation and Microplastic Removal

Robust bio-inspired superhydrophilic and underwater superoleophobic membranes for simultaneously fast water and oil recovery

A facile route for the fabrication of a superhydrophilic and underwater superoleophobic phosphorylated PVA-coated mesh for both oil/water immiscible mixture and emulsion separation

Durable Underwater Super-Oleophobic/super-hydrophilic Conductive Polymer Membrane for Oil-Water Separation.

High-Value Oil–Water Separation Materials Prepared from Waste Polyethylene Terephthalate

A rapid two-step process to prepare a high-throughput, efficient, reusable superhydrophobic–superoleophilic stainless steel mesh for oil/water separation