Sticky Ends in a Self- Assembling ABA Triblock Copolymer: the Role of Ureas in Stimuli- Responsive Hydrogels

Ryan T. Shafranek,Joel D. Leger,Song Zhang,Munira Khalil,Xiaodan Gu,Alshakim Nelson

DOI: https://doi.org/10.1039/c8me00063h

IF: 4.92

2019-01-01

Molecular Systems Design & Engineering

Abstract:Directed self-assembly in polymeric hydrogels allows tunability of thermal response and viscoelastic properties.

What problem does this paper attempt to address?

Ion pairing controls rheological properties of "processionary" polyelectrolyte hydrogels

Hassan Srour,Martien Duvall Deffo Ayagou,Thi Thanh-Tam Nguyen,Nicolas Taberlet,Sébastien Manneville,Chantal Andraud,Cyrille Monnereau,Mathieu Leocmach

DOI: https://doi.org/10.1039/C6SM02022D

2016-11-23

Abstract:We demonstrated recently that polyelectrolytes with cationic moieties along the chain and a single anionic head are able to form physical hydrogels due to the reversible nature of the head-to-body ionic bond. Here we generate a variety of such polyelectrolytes with various cationic moieties and counterion combinations starting from a common polymeric platform. We show that the rheological properties (shear modulus, critical strain) of the final hydrogels can be modulated over three orders of magnitude depending on the cation/anion pair. Our data fit remarkably well within a scaling model involving a supramolecular head-to-tail single file between cross-links, akin to the behaviour of pine-processionary caterpillar. This model allows the quantitative measure of the amount of counterion condensation from standard rheology procedure.

Soft Condensed Matter,Materials Science
Cl transport across the basolateral membrane in frog skin epithelium

A. Dörge,R. Rick,F. Beck,K. Thurau

DOI: https://doi.org/10.1007/BF00581772

Pflügers Archiv

Abstract:
Follicular dynamics and secretion of inhibin and oestradiol-17 beta during the oestrous cycle of the hamster.

H. Kishi,K. Taya,G. Watanabe,S. Sasamoto

DOI: https://doi.org/10.1677/JOE.0.1460169

1995-07-01

Journal of Endocrinology

Abstract:Plasma and ovarian levels of inhibin were determined by a radioimmunoassay (RIA) at 3-h intervals throughout the 4-day oestrous cycle of hamsters. Plasma concentrations of FSH, LH, progesterone, testosterone and oestradiol-17 beta were also determined by RIAs. In addition, hamsters were injected at various times with human chorionic gonadotrophin (hCG) to determine the follicular development. The changes in plasma concentrations of FSH after injection of antisera to oestradiol-17 beta (oestradiol-AS) and inhibin (inhibin-AS) on the morning of day 2 (day 1 = day of ovulation) were also determined. Plasma concentrations of inhibin showed a marked increase on the afternoon of day 1, remained at plateau levels until the morning of day 4, then increased abruptly on the afternoon of day 4 when preovulatory LH and FSH surges were initiated. A marked decrease in plasma concentrations of inhibin occurred during the process of ovulation after the preovulatory gonadotrophin surges. An inverse relationship between plasma levels of FSH and inhibin was observed when the secondary surge of FSH was in progress during the periovulatory period. Plasma concentrations of oestradiol-17 beta showed three increase phases and these changes differed from those of inhibin. Changes in plasma concentrations of oestradiol-17 beta correlated well with the maturation and regression of large antral follicles. Follicles capable of ovulating following hCG administration were first noted at 2300 h on day 1. The number of follicles capable of ovulating reached a maximum on the morning of day 3 (24.8 +/- 0.6), and decreased by 0500 h on day 4 (15.0 +/- 1.1), corresponding to the number of normal spontaneous ovulations.(ABSTRACT TRUNCATED AT 250 WORDS)
In silico Design of Photoresponsive Peptide-based Hydrogel with Controllable Structural and Rheological Properties

Xiao Wang,Yining Wang,Junfeng Wang,Zhen Li,Jun Zhang,Jiawei Li

DOI: https://doi.org/10.1016/j.colsurfa.2023.131020

2023-01-23

Abstract:Self-assembly of peptide-based molecules has emerged as an appealing strategy for developing intelligent nanomaterials with favorable biocompatibility and biodegradability. However, how to design the self-assembly systems with controllable and reversible rheological property is still challenging. In this study, coarse-grained molecular dynamics simulation is employed to develop peptides-based hydrogel with photo-stimuli-responsive capability. Our simulations demonstrate that the bisazoFA molecule, generated by grafting azobenzene (azo) moiety to the phenylalanyl-alanine (FA), can self-assemble into twisted networks. With the introduction of diphenylalanine (FF), the micelles undergo morphological transitions from networks to lamellar structures. By manipulating the UV-vis light irradiation, the wormlike structure with orderly-arranged hydrophobic interior is achieved. The distinct self-assembled structures can induce varied viscosity. Furthermore, the mechanisms underlying the self-assembly/stimuli-response processes are examined in the perspective from energy and structure. Specifically, the varied structural/rheological property of systems are driven by the stacking modes between bisazoFA and spatial arrangement of FF molecules. This bottom-up in silico design not only offers a feasible strategy to develop hydrogel with controllable and reversible rheological property, but also enrich our understanding of the self-assembly of peptide-based molecules.

chemistry, physical
Synthesis and Self-Assembly of CO 2 –Temperature Dual Stimuli-Responsive Triblock Copolymers

huijuan zhang

DOI: https://doi.org/10.1021/ma5001404

IF: 5.5

2014-01-01

Macromolecules

Abstract:Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) with a beta-cyclodextrin (beta-CD) at the chain end was synthesized via atom transfer radical polymerization (ATRP); poly(epsilon-caprolactone) (PCL) with a -C=C- segment and an adamantane (Ada) group at two ends, respectively, was prepared through ring-opening polymerization (ROP), and poly(N-isopropylacrylamide) (PNIPAM) with a -S-C(S)-S- segment, which can be converted into a thiol group, was yielded by reversible addition-fragmentation chain transfer polymerization (RAFT). A supramolecular triblock stimuli-responsive copolymer PNIPAM-b-PCL-b-PDMAEMA having good biocompatibility with PNIPAM and PDMAEMA hydrophilic segments and PCL hydrophobic segment was constructed by thiol-ene Michael addition and host- guest interaction. The triblock copolymer could self-assemble into vesicles and respond to carbon dioxide (CO2) gas and temperature reversibly. Under the stimulation of CO2, the vesicular assemblies swelled obviously; while raising the temperature from 25 to 40 degrees C, the assemblies displayed a conversion between vesicles and spherical micelles.
Structure Frustration Enables Thermal History-Dependent Responsive Behavior in Self-Healing Hydrogels

Chengtao Yu,Kunpeng Cui,Honglei Guo,Ya Nan Ye,Xueyu Li,Jian Ping Gong

DOI: https://doi.org/10.1021/acs.macromol.1c01461

IF: 5.5

2021-10-29

Macromolecules

Abstract:Biological soft tissues usually execute their functions via nonequilibrium and dynamic structural transformations. By contrast, functional hydrogels are mainly constructed by implementing static and equilibrium structures in the polymer network. Here, using polyampholyte hydrogel as a model system, we demonstrated that the nonequilibrium structure transformation in self-healing hydrogels enables the gels with many new features, including thermal history dependence, quick and asymmetric thermal response (instant transparent-to-turbid transition but slow turbid-to-transparent transition), tunable cloud point, tunable recovery time, and tiny changes in sample size and mechanical performance. These features make them distinct to conventional thermoresponsive hydrogels based on thermodynamic equilibrium and endow them with a new type of promising thermoresponsive materials. We revealed the structure change and studied the role of the thermal protocol on this thermoresponsive behavior by combining ultraviolet spectrum, small-angle X-ray scattering, rheology, and mechanical measurements. We also presented two conceptual applications of this thermoresponsive hydrogel in thermal imaging and security paper. We believe that this work will inspire future research on creating functional hydrogels via nonequilibrium structure transformations.

polymer science
In situ stimulation of self-assembly tunes the elastic properties of interpenetrated glycolipid-biopolymer biobased hydrogels

Chloé Seyrig,Alexandre Poirier,Thomas Bizien,Niki Baccile

DOI: https://doi.org/10.48550/arXiv.2212.11721

2022-12-22

Soft Condensed Matter

Abstract:Hydrogels are widespread soft materials, which can serve a wide range of applications. The control over the viscoelastic properties of the gel is of paramount importance. Ongoing environmental issues have raised the consumer's concern towards the use of more sustainable materials, including hydrogels. However, are greener materials compatible with high functionality? In a safe-by-design approach, this work demonstrates that functional hydrogels with in situ responsivity of their elastic properties by external stimuli can be developed from entirely ``sustainable'' components, a biobased amphiphile and biopolymers (gelatin, chitosan and alginate). The bioamphiphile is a stimuli-responsive glycolipid obtained by microbial fermentation, which can self-assemble into fibers, but also micelles or vesicles, in water under high dilution and by a rapid variation of the stimuli. The elastic properties of the bioamphiphile/biopolymer interpenetrated hydrogels can be modulated by selectively triggering the phase transition of the glycolipid and/or the biopolymer inside the gel by mean of temperature or pH.
Synthesis and characterization of stimuli‐sensitive micro‐ and nanohydrogels based on photocrosslinkable poly(dimethylaminoethyl methacrylate)

H. Adler,V. Choudhary,Smrati Gupta,D. Kuckling,K. Kretschmer

DOI: https://doi.org/10.1002/POLA.21846

2007-02-15

Abstract:The aim of this work was the development of a versatile route for the preparation of temperature- and pH-responsive hydrogels with small dimensions. The copolymerization of N,N-dimethylaminoethyl methacrylate with various amounts (5 and 10 mol %) of dimethylmaleimidoethyl methacrylate in solution with 2,2′-azobisisobutyronitrile as an initiator is described. The structural and molecular characterization of the copolymers was performed with proton nuclear magnetic resonance, Fourier transform infrared, and ultraviolet spectroscopy, as well as size exclusion chromatography. Differential scanning calorimetry and thermogravimetry were used for the thermal characterization of the copolymers. Micro- and nanohydrogels of the copolymers were prepared by photocrosslinking. The gels obtained by photocrosslinking were characterized with a combination of surface plasmon resonance and optical waveguide spectroscopy, dynamic light scattering, and scanning electron microscopy. The hydrogels showed temperature- and pH-responsive behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 669–679, 2007

Chemistry,Materials Science
Synthesis and Self-Assembly of Co2-Responsive Dendronized Triblock Copolymers

Meng Huo,Qiquan Ye,Hailong Che,Mengzhen Sun,Jinying Yuan,Yen Wei

DOI: https://doi.org/10.1039/c5py00868a

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:Stimuli-responsive morphology evolution of polymeric self-assemblies may serve as a model to promote the understanding of cellular shape transformation. Generally, the original morphology of these selfassemblies can be obtained through delicate regulation of the ratio of hydrophobic/hydrophilic polymer chains. Regretfully, less attention has been paid to the influence of chain "thickness" on the self-assembly and stimuli-responsiveness. In this article, CO2-responsive dendronized triblock copolymers POEGMA-bP(Gn)-b-PDEAEMA (n = 1, 2) with Frechet-type poly(aryl ether) as the dendron (Gn) were synthesized by RAFT polymerization, and the dendronized block was designed to allow the chain "thickness" tunable. We found that the generation of dendrons, the type of common solvent, and CO2-stimulus all contributed to the self-assembly of these triblock copolymers. Micelles with different sizes could be obtained in both THF/H2O and DMF/H2O, except that POEGMA-b-P(G2)-b-PDEAEMA precipitated in THF/H2O. Upon CO2 aeration, POEGMA-b-P(G1)-b-PDEAEMA micelles in THF/H2O disrupted into smaller ones while in DMF/H2O they swelled slightly. Micelles formed in DMF/H2O of POEGMA-b-P(G2)-b-PDEAEMA were much larger than that of POEGMA-b-P(G1)-b-PDEAEMA. Similarly, POEGMA-b-P(G2)-b-PDEAEMA micelles swelled to larger micelles upon CO2 triggering. Considering the tunable thickness of the dendron block, these CO2-responsive dendronized polymers may add a new dimension in biomimetic morphology transformation.
Sulfobetaines Meet Carboxybetaines: Modulation of Thermo- and Ion-Responsivity, Water Structure, Mechanical Properties, and Cell Adhesion

Martin Danko,Zuzana Kroneková,Miroslav Mrlik,Josef Osicka,Ammar Bin Yousaf,Andrea Mihálová,Jan Tkac,Peter Kasak

DOI: https://doi.org/10.1021/acs.langmuir.8b01592

IF: 3.9

2019-02-05

Langmuir

Abstract:A procedure for the preparation of copolymers bearing sulfobetaine and carboxybetaine methacrylic-based monomers by free-radical polymerization is described and discussed. A combination of monomers affects the upper critical solution temperature (UCST) in water and in the presence of a simple NaCl electrolyte while retaining the zwitterionic character. In addition, hydrogel samples were prepared and showed tunable water structure and mechanical properties. The total nonfreezable water content decreases with the amount of carboxybetaine segment in the hydrogel feed and the compression moduli were in a range of 0.7-1.6 MPa. Responses to external conditions such as temperature and ion strength were investigated and a potential application such as modulated thermal detection is proposed. The presence of the carboxylate group in the carboxybetaine segment enables a small fluorescence probe and peptide bearing RDG motif to be attached to polymer and hydrogel samples, respectively. The hydrogel samples functionalized with the RGD motif exhibit controlled cell adhesion. Such synthetic strategy based on combination of different zwitterionic segments offers a simple pathway for the development of zwitterionic materials with programmable properties.
Hierarchical Self-Assembly, Photo-Responsive Phase Behavior and Variable Tensile Property of Azobenzene-Containing ABA Triblock Copolymers

Zai-Zai Tong,Jin-Qiao Xue,Rui-Yang Wang,Jie Huang,Jun-Ting Xu,Zhi-Qiang Fan

DOI: https://doi.org/10.1039/c4ra12844c

IF: 4.036

2015-01-01

RSC Advances

Abstract:A series of triblock copolymers with liquid crystalline (LC) poly{6-[4-(4-methoxyphenylazo)phenoxy]hexyl methacrylate} (PMMAZO) as the end blocks and rubbery poly(n-butyl acrylate) (PnBA) as the midblock were synthesized.
Sparse, random array processing for space-based radar

J. Schindler,H. Steyskal

DOI: https://doi.org/10.1109/SSST.2004.1295631

2004-09-27

Abstract:We investigate moving target detection with a space-based cluster of radar satellites, modeled as a random sparse array. Results show that improvement in signal to interference is a sensitive function of the pulse repetition frequency and varies over a large dynamic range. Achievable improvement factor maxima are moderately degraded by array pitch (satellite cluster rotation) and strongly degraded with increasing position errors. In general, with increased randomness, fewer elements contribute to form DPCA pairs so that satellite usage efficiency and SNR are degraded.
Self-healing polyacrylic acid hydrogels

Umit Gulyuz,Oguz Okay

DOI: https://doi.org/10.1039/c3sm52015c

IF: 4.046

2013-01-01

Soft Matter

Abstract:pH responsive physical gels were prepared by micellar copolymerization of acrylic acid with 2 mol% stearyl methacrylate (C18) in a solution of worm-like sodium dodecyl sulfate micelles. The physical gels are insoluble in water and exhibit time-dependent dynamic moduli, high Young's modulus (6–53 kPa), high fracture stress (41–173 kPa), high elongation ratios at break (1800–5000%), and self-healing, as evidenced by rheological and mechanical measurements. Cyclic elongation tests show significant hysteresis due to the existence of reversibly breakable bonds (up to 25%) within the gel network. As the polymer concentration is increased, both the lifetime of hydrophobic associations and the mechanical strength of gels increase while the elongation ratio at break decreases. As compared to the polyacrylamide gels formed under identical conditions, the present hydrogels exhibit a much stronger self-healing effect, which is attributed to the cooperative hydrogen bonding between the carboxyl groups stabilizing the hydrophobic domains. The efficiency of self-healing significantly increases with increasing temperature due to the decrease of the lifetime of hydrophobic associations.

polymer science,chemistry, physical,materials science, multidisciplinary,physics
Effects of the Hydrophilic-Lipophilic Balance of Alternating Peptides on Self-Assembly and Thermo-Responsive Behaviors

Abu Bin Ihsan,Mahmuda Nargis,Yasuhito Koyama

DOI: https://doi.org/10.3390/ijms20184604

2019-09-17

Abstract:A series of N-substituted poly(Gly-alter-Val) peptides were successfully synthesized for the systematic evaluation of the micellization behavior of alternating peptides. Three-component polymerization employing an aldehyde, a primary ammonium chloride, and potassium isocyanoacetate afforded four alternating peptides in excellent yields. We investigated the dependence of the hydrophilic-lipophilic balance of alternating peptides on the micellization behavior. All the aqueous solutions of alternating peptides exhibited upper critical solution temperature (UCST) behaviors, strongly indicating that the alternating binary pattern would mainly contribute to the UCST behaviors. The cloud points of alternating peptides shifted to higher temperatures as the side chains became more hydrophilic, which is opposite to the trend of typical surfactants. Such unusual micellization behaviors appeared to be dependent on the quasi-stable structure of single polymer chains formed in water.
Quadruple Hydrogen Bond-Containing A-AB-A Triblock Copolymers: Probing the Influence of Hydrogen Bonding in the Central Block

Boer Liu,Xi Chen,Glenn A Spiering,Robert B Moore,Timothy E Long

DOI: https://doi.org/10.3390/molecules26154705

IF: 4.6

2021-08-03

Molecules

Abstract:This work reveals the influence of pendant hydrogen bonding strength and distribution on self-assembly and the resulting thermomechanical properties of A-AB-A triblock copolymers. Reversible addition-fragmentation chain transfer polymerization afforded a library of A-AB-A acrylic triblock copolymers, wherein the A unit contained cytosine acrylate (CyA) or post-functionalized ureido cytosine acrylate (UCyA) and the B unit consisted of n-butyl acrylate (nBA). Differential scanning calorimetry revealed two glass transition temperatures, suggesting microphase-separation in the A-AB-A triblock copolymers. Thermomechanical and morphological analysis revealed the effects of hydrogen bonding distribution and strength on the self-assembly and microphase-separated morphology. Dynamic mechanical analysis showed multiple tan delta (δ) transitions that correlated to chain relaxation and hydrogen bonding dissociation, further confirming the microphase-separated structure. In addition, UCyA triblock copolymers possessed an extended modulus plateau versus temperature compared to the CyA analogs due to the stronger association of quadruple hydrogen bonding. CyA triblock copolymers exhibited a cylindrical microphase-separated morphology according to small-angle X-ray scattering. In contrast, UCyA triblock copolymers lacked long-range ordering due to hydrogen bonding induced phase mixing. The incorporation of UCyA into the soft central block resulted in improved tensile strength, extensibility, and toughness compared to the AB random copolymer and A-B-A triblock copolymer comparisons. This study provides insight into the structure-property relationships of A-AB-A supramolecular triblock copolymers that result from tunable association strengths.
Self-assembling multiblock amphiphiles: Molecular design, supramolecular structure, and mechanical properties

Hamed Mortazavi,Cornelis Storm

DOI: https://doi.org/10.48550/arXiv.1507.05456

2015-07-20

Soft Condensed Matter

Abstract:We perform off-lattice, canonical ensemble molecular dynamics simulations of the self-assembly of long segmented copolymers consisting of alternating, tunably attractive and hydrophobic {\em binder} domains, connected by hydrophilic {\em linker} chains whose length may be separately controlled. In such systems, the molecular design of the molecule directly determines the balance between energetic and entropic tendencies. We determine the structural phase diagram of this system, which shows collapsed states (dominated by the attractive linkers' energies), swollen states (dominated by the random coil linkers' entropies) as well as intermediate network hydrogel phases, where the long molecules exhibit partial collapse to a {\em single molecule network} state. We present an analysis of the connectivity and spatial structure of this network phase, and relate its basic topology to mechanical properties, using a modified rubber elasticity model. The mechanical properties are further characterized in a direct computational implementation of oscillatory rheology measurements. We find that it is possible to optimize the mechanical performance by an appropriate choice of molecular design, which may point the way to novel synthetics that make optimal mechanical use of constituent polymers.
Endothelin and ischaemic arrhythmias-antiarrhythmic or arrhythmogenic?

I. Sharif,K. Kane,C. Wainwright

DOI: https://doi.org/10.1016/S0008-6363(98)00150-3

IF: 13.081

1998-09-01

Cardiovascular Research

Abstract:
Tuning Structural Organization via Molecular Design and Hierarchical Assembly to Develop Supramolecular Thermoresponsive Hydrogels

Dan Jing Wu,Martin G T A Rutten,Jingyi Huang,Maaike J G Schotman,Johnick F van Sprang,Bart M Tiemeijer,Gijs M Ter Huurne,Sjors P W Wijnands,Mani Diba,Patricia Y W Dankers

DOI: https://doi.org/10.1021/acs.macromol.4c00567

IF: 5.5

2024-07-03

Macromolecules

Abstract:The cellular microenvironment is composed of a dynamic hierarchical fibrillar architecture providing a variety of physical and bioactive signals to the surrounding cells. This dynamicity, although common in biology, is a challenge to control in synthetic matrices. Here, responsive synthetic supramolecular monomers were designed that are able to assemble into hierarchical fibrous structures, combining supramolecular fiber formation via hydrogen bonding interactions, with a temperature-responsive hydrophobic collapse, resulting in cross-linking and hydrogel formation. Therefore, amphiphilic molecules were synthesized, composed of a hydrogen bonding ureido-pyrimidinone (UPy) unit, a hydrophobic alkyl spacer, and a hydrophilic oligo(ethylene glycol) tail. The temperature responsive behavior was introduced by functionalizing these supramolecular amphiphiles with a relatively short poly(N-isopropylacrylamide) (PNIPAM) chain (M n ∼ 2.5 or 5.5 kg/mol). To precisely control the assembly of these monomers, the length of the alkyl spacer between the UPy moiety and PNIPAM was varied in length. A robust sol-gel transition, with the dodecyl UPy-PNIPAM molecule, was obtained, with a network elasticity enhancing over 2000 times upon heating above room temperature. The UPy-PNIPAM compounds with shorter alkyl spacers were already hydrogels at room temperature. The sol-gel transition of the dodecyl UPy-PNIPAM hydrogelator could be tuned by the incorporation of different UPy-functionalized monomers. Furthermore, we demonstrated the suitability of this system for microfluidic cell encapsulation through a convenient temperature sol-gel transition. Our results indicate that this novel thermoresponsive supramolecular system offers a modular platform to study and guide single-cell behavior.
Synthesis, self-assembly, and formation of polymer vesicle hydrogels of thermoresponsive copolymers

Xudong Wang,Yueqin Duan,Chenxi Li,Yan Lu

DOI: https://doi.org/10.1007/s10853-015-8911-6

IF: 4.5

2015-02-26

Journal of Materials Science

Abstract:A series of N-isopropylacrylamide and methacrylate derivative random copolymers with various contents of cholic acid groups in the side chain are synthesized by free radical polymerization. These thermoresponsive random copolymers can organize themselves into large vesicles in water upon heating, accompanied by gradual phase transitions from transparent polymer solutions to turbid solutions and then to white hydrogels. The white vesicle hydrogels display non-elastic deformation and shrink. They can re-dissolve directly upon cooling. Further, X-ray diffraction results indicate the existence of crystalline regions on the vesicle membrane. Based on these results, the possible formation mechanism of the fiber-layer structures on the vesicle membrane is also discussed. It is noteworthy that the gel-forming temperatures of the resultant copolymers below 37 °C which indicate the vesicle gels may find applications as injectable implant systems for sustained drug delivery.

materials science, multidisciplinary
Structure, Humidity Adaptivity, and Elasticity of Hydrogen-bonding Complexations Formed by Self-assembly of Triblock Copolymer and Homopolymer

Weijie Wang,Hanxin Jian,Hao Huang,Fengfeng Feng,Qingye Meng,Yuli Li,Gang Chen,Shuguang Yang

DOI: https://doi.org/10.1039/d4py00959b

IF: 4.6

2024-11-06

Polymer Chemistry

Abstract:Specific aggregation structures largely influence the macro-physical performances of materials. Small changes in molecular components, conformation, crystallisation and microphase transitions can dramatically alter material properties. Here, we combine a triblock copolymer polystyrene-b-poly(ethylene oxide)-b-polystyrene (SES) with a homopolymer poly(acrylic acid) (PAA), fabricating elastomers with multi-hierarchical architectures. Unlike the single molecular chain of traditional elastomers, the flexible domain of these elastomers is formed via hydrogen bonding of the complex chains (A/E) of poly (ethylene oxide) (PEO) and PAA. The polystyrene (PS) blocks are microphase-separated and hydrophobically associated, providing physically crosslinks among the flexible complex chains and enhancing the strength of the elastomers. The influence of molecular weight of the PS blocks, molecular chain length of PAA, and relative humidity on the elastomer's macro-physical properties were revealed using small-angle X-ray scattering, transmission electron microscopy, differential scanning calorimetry, fourier transform infrared spectroscopy, and tensile stress–strain measurements. The PS block forms a hard spherical domain that affects the hydrogen-bonding complex behaviours of the PAA and PEO segments. Enlarging the PS sphere would hinder the formation of the PAA/PEO complex, but this trend is mitigated by shortening the PAA chain length. Hydrophobic steric hindrance by the PS sphere disturbs the association behaviours of the PAA and PEO segments. These structural differences result in different mechanical properties of the elastomers. Moreover, the elastomers adapt to changes in relative humidity and show an obviously humidity-induced glass transition. The elastomer possesses good elastic properties under lower and higher humidity conditions. The methods and ideas presented in this study will enable the construction of new types of elastomers.

polymer science

Sticky Ends in a Self- Assembling ABA Triblock Copolymer: the Role of Ureas in Stimuli- Responsive Hydrogels

Ion pairing controls rheological properties of "processionary" polyelectrolyte hydrogels

Cl transport across the basolateral membrane in frog skin epithelium

Follicular dynamics and secretion of inhibin and oestradiol-17 beta during the oestrous cycle of the hamster.

In silico Design of Photoresponsive Peptide-based Hydrogel with Controllable Structural and Rheological Properties

Synthesis and Self-Assembly of CO 2 –Temperature Dual Stimuli-Responsive Triblock Copolymers

Structure Frustration Enables Thermal History-Dependent Responsive Behavior in Self-Healing Hydrogels

In situ stimulation of self-assembly tunes the elastic properties of interpenetrated glycolipid-biopolymer biobased hydrogels

Synthesis and characterization of stimuli‐sensitive micro‐ and nanohydrogels based on photocrosslinkable poly(dimethylaminoethyl methacrylate)

Synthesis and Self-Assembly of Co2-Responsive Dendronized Triblock Copolymers

Sulfobetaines Meet Carboxybetaines: Modulation of Thermo- and Ion-Responsivity, Water Structure, Mechanical Properties, and Cell Adhesion

Hierarchical Self-Assembly, Photo-Responsive Phase Behavior and Variable Tensile Property of Azobenzene-Containing ABA Triblock Copolymers

Sparse, random array processing for space-based radar

Self-healing polyacrylic acid hydrogels

Effects of the Hydrophilic-Lipophilic Balance of Alternating Peptides on Self-Assembly and Thermo-Responsive Behaviors

Quadruple Hydrogen Bond-Containing A-AB-A Triblock Copolymers: Probing the Influence of Hydrogen Bonding in the Central Block

Self-assembling multiblock amphiphiles: Molecular design, supramolecular structure, and mechanical properties

Endothelin and ischaemic arrhythmias-antiarrhythmic or arrhythmogenic?

Tuning Structural Organization via Molecular Design and Hierarchical Assembly to Develop Supramolecular Thermoresponsive Hydrogels

Synthesis, self-assembly, and formation of polymer vesicle hydrogels of thermoresponsive copolymers

Structure, Humidity Adaptivity, and Elasticity of Hydrogen-bonding Complexations Formed by Self-assembly of Triblock Copolymer and Homopolymer