Abstract:Process diagram of composite samples and performance test. Currently, with the development of many important fields such as aerospace and automotive industries, polymer composites have become an indispensable part of these fields. As for preparation methods, common methods like hot pressing make composites difficult to achieve continuous production. This paper proposed the continuous forced assembly (CFA) and designed continuous production facility, which can achieve the continuous preparation of low filler content (30 wt%) composites with high electrical/thermal conductivity. Besides, we structurally designed roll pressing device and explored its effect on the machining process. Here, short cut carbon fiber (SCF) and solid silica gel (MVQ) are used as electrically/thermally conductive filler and polymer matrix respectively, and continuous preparation of functional composites is completed by CFA method. Compared to the thermal conductivity (1.186 W/(m·K)) of SCF/MVQ composites prepared with lower viscosity matrix (MVQ‐A), the thermal conductivity of composites prepared with high viscosity matrix (MVQ‐D) reached 2.230 W/(m·K). Meanwhile, the process is optimized to explore the effects of the "accordion folding" and "pre‐stretch" methods on the thermal conductivity of composites, the thermal conductivity is converted from in‐plane to vertical direction. In addition, under the same filler content, 2 wt% rGO is beneficial in enhancing the electrical/thermal conductivity of prepared composites. The electrical conductivity and thermal conductivity of SCF28/rGO2/MVQ composite reach 663 S/m and 2.82 W/(m·K), which is higher than that of the properties of SCF/MVQ composite with the same filler content. To sum up, CFA facilitates continuous production of composites, which can be used in thermal management materials (TMMs). Highlights Compared with the "pre‐stretch" method, the thermal conductivity of SCF/MVQ composites prepared by "accordion folding" has a significant improvement. The SCF/rGO/MVQ composites prepared by CFA method show superior thermal conductivity and electrical conductivity. Composites prepared by CFA method can realize the continuous preparation of functional materials.

Study on the Assorted Non-Asbestos Fiber Reinforce Composite by Beater-Addition Process

Intensified Test Research on the Influence of Polypropylene Fiber & Silica Fume on Recycled Concrete

Experimental study on mechanical behavior of PE fiber cementitious composite

Mechanical design of rubber-based sealing composites reinforced with short non-asbestos fibers

Design of Non-asbestos Sealing Composite Material Based on Service Performances

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

Preparation of Reinforcement of Aramid Fiber and Fiberglass

Factor analysis on property enhancement of electrically/thermally conductive composites by continuous forced assembly

Investigations on the Morphological, Mechanical, Ablative, Physical, Thermal, and Electrical Properties of EPDM-Based Composites for the Exploration of Enhanced Thermal Insulation Potential

Study of Mechanical Properties of an Eco-Friendly Concrete Containing Recycled Carbon Fiber Reinforced Polymer and Recycled Aggregate

A Study on the Mechanical Properties of Glass-Fiber-Reinforced Defective Gypsum Boards

Experimental investigation on the performance of the asphalt mixture with ceramic fiber

Study on the effect of wet mixing process on the properties of EPDM rubber/fiber/hollow glass microsphere composite system

Comparative Study on the Structure, Mechanical, Thermal, and Tribological Properties of PF Composites Reinforced by Different Kinds of Mesoporous Silicas

Comprehensive Analysis of Mechanical, Economic, and Environmental Characteristics of Hybrid PE/PP Fiber-Reinforced Engineered Geopolymer Composites

High‐strength, electrically insulated industrial meta‐aramid paper reinforced with polyethylene terephthalate microfibre pulp in a sandwich structure

Optimizing the Anti-stab Performance of Fiber Composites by Using Ceramic Particle Reinforcements

Study on mechanical and thermomechanical properties of flax/glass fiber hybrid‐reinforced epoxy composites

Mechanical, fracture, and environmental performance of greener polymer composites containing low to high micro fillers with recycled and byproduct origins

Thermal Characterization of Flax/Basalt Fiber Reinforced Phenol Resin Brake Pad Material: Effective Replacement of Asbestos

Low-velocity impact and static behaviors of high-resilience thermal-bonding inter/intra-ply hybrid composites