Abstract:Perovskite solar cells (PSCs) have attracted considerable interest because of their high potential for solar energy conversion. Power conversion efficiencies of the PSCs have rapidly increased from 3.8 to over 20% only in the past few years. PSCs have several similarities to dye-sensitized solar cells in their device compositions; mesoporous TiO2 (mp-TiO2) is sensitized by light-absorbing components and placed into a medium containing hole transporting materials (HTMs). On the other hand, the perovskite materials for the light-harvesting, for example, CH3NH3PbI3 (MAPbI3), have a greater advantage for the photovoltaic applications; extremely long photocarrier diffusion lengths (over 1 μm) enable carrier transports without singnificant loss. In this respect, the surface states, that can be possible recombination centers, are also of great importance. Availability of solution processes is another important aspect in terms of low cost fabrication of PSCs. Two-step methods, where PbI2 is first introduced from solution onto a mp-TiO2 film and subsequently transformed into the MAPbI3 by the exposition of a solution containing MAI, suggest that use of such a high PbI2 concentration is crucial to obtain higher performance. The experiments also indicate that the PbI2-rich growth condition modifies TiO2/ or HTM/MAPbI3 interfaces in such a way that the photocarrier transport is improved. Thus, the characteristics of surfaces and interfaces play key roles in the high efficiencies of the PSCs. In this Account, we focus on the structural stability and electronic states of the representative (110), (001), (100), and (101) surfaces of tetragonal MAPbI3, which can be regarded as reasonable model HTM/MAPbI3 interfaces, by use of first-principles calculations. By examining various types of PbIx polyhedron terminations, we found that there are two major phases on all of the four surface facets. They can be classified as vacant- and flat-type terminations, and the former is more stable than the latter under thermodynamically equilibrium conditions. More interestingly, both terminations can coexist especially on the more probable (110) and (001) surfaces. Electronic states, that is, projected density of states, of the stable-vacant and PbI2-rich-flat terminations on the two surfaces are almost the same as that in bulk MAPbI3. These surfaces can contribute to the long carrier lifetime actually observed for the PSCs because they have no midgap surface states. Furthermore, the shallow surface states on the (110) and (001) flat terminations can be efficient intermediates for hole transport to HTMs. Consequently, the formation of the flat terminations under the PbI2-rich condition will be beneficial for the improvement of PSC performance.

Scaling Behavior and Morphology Evolution of Ch3nh3pbi3 Perovskite Thin Films Grown by Thermal Evaporation

Surface Dynamics Transition of Vacuum Vapor Deposited CH3NH3PbI3 Perovskite Thin Films

Optical Characterizations Of The Surface States In Hybrid Lead-Halide Perovskites

Effects of Precursor Ratios and Annealing on Electronic Structure and Surface Composition of CH3NH3PbI3 Perovskite Films

In-plane uniaxial crystal growth in CH3NH3PbI3 bar-coated thin film by evaporation-site-controlled annealing

Morphology and Photoluminescence of CH3NH3PbI3 Deposits on Nonplanar, Strongly Curved Substrates

Controllable Sequential Deposition of Planar Ch3nh3pbi3 Perovskite Films Via Adjustable Volume Expansion

Surface and Grain Boundary Carbon Heterogeneity in CH3NH3PbI3 Perovskites and Its Impact on Optoelectronic Properties

Evolutions Of Optical Constants, Interband Electron Transitions, And Bandgap Of Sn-Doped Ch3nh3pbi3 Perovskite Films

Characterization of structural transitions and lattice dynamics of hybrid organic–inorganic perovskite CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>*

Characterization of structural transitions and lattice dynamics of hybrid organic–inorganic perovskite CH3NH3PbI3

Surface Properties of CH3NH3PbI3 for Perovskite Solar Cells.

Influence of Drying Temperature on Morphology of MAPbI3 Thin Films and the Performance of Solar Cells

In Situ Monitoring of Thermal Degradation of CH3NH3PbI3 Films by Spectroscopic Ellipsometry

CH 3 NH 3 PbI 3 grain growth and interfacial properties in meso-structured perovskite solar cells fabricated by two-step deposition.

Investigation on Crystallization of CH3NH3PbI3 Perovskite and Its Intermediate Phase from Polar Aprotic Solvents

Surface and grain boundary carbon heterogeneity in CH 3 NH 3 PbI 3 perovskites and its impact on optoelectronic properties

Atomic-scale imaging of CH3NH3PbI3 structure and its decomposition pathway

Effects of Deposition Methods and Processing Techniques on Band Gap, Interband Electronic Transitions, and Optical Absorption in Perovskite Ch3nh3pbi3 Films

Nanoscale stability behavior in CH3NH3PbI3 perovskites via scanning thermal chemical microscopy

Growth mechanism of CH3NH3I in a vacuum processed perovskite