Abstract:An electrochemical carbon nanotube filter has been reported to be effective for the removal and electrooxidation of aqueous chemicals and microorganisms. Here, we investigate how carbon nanotube (CNT) chemical surface treatments including calcination to remove amorphous carbon, acid treatment to remove internal residual metal oxide, formation of surficial oxy-functional groups, and addition of Sb-doped SnO(2) particles affect the electrooxidative filter performance. The various CNT samples are characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS) and electrochemically evaluated by cyclic voltammetry, open circuit potential versus time analysis, and electrochemical impedance spectroscopy. Voltammetry results indicate that the near CNT surface pH is at least two units lower than the bulk pH. The electrooxidative performance of the various CNT samples is evaluated with 1 mM of methyl orange (MO) in 100 mM sodium sulfate at a flow rate of 1.5 mL min(-1). At both 2 and 3 V, the efficacy of electrochemical filtration is observed to be function of CNT surface chemistry. The samples with the greatest electrooxidation were the calcinated then HCl-treated CNTs, i.e., the CNTs with the most surficial sp(2)-bonded carbon, and the Sb-SnO(2)-coated CNTs, i.e., the CNTs with the most electrocatalytic surface area. At 3 V applied voltage, these CNT samples are able to oxidize 95% of the influent MO within the liquid residence time of <1.2 s. The broader applicability of electrochemical filtration is evaluated by challenging the C-CNT-HCl and C-CNT-HNO(3) networks with various organics including methylene blue, phenol, methanol, and formaldehyde. At 3 V applied voltage, both CNTs are able to degrade a fraction of all the organics with the extent organic degradation dependent on both CNT and organic properties. The C-CNT-HCl network generally had the better oxidative performance than the C-CNT-HNO(3) network with an exception being the positively charged methylene blue. The extent of MO degradation, steady-state current, anode potential, effluent pH, and back pressure are also measured as a function of applied voltage (1-3 V) and CNT surface chemistry. Mass spectrometry of electrochemical CNT filter effluent at 2 and 3 V is utilized to evaluate plausible electrooxidation products. Energy consumption as compared to state-of-the-art electrodes and strategies to tailor the CNT surface for a specific target molecule are discussed.

A Carbon Nanotubes Composite Filter for Removal of Oil Particles

A highly efficient and versatile carbon nanotube/ceramic composite filter

Use of Carbon Nanotube Filter in Removing Bioaerosols

A bioinspired vine-like hierarchically structured PET/CA composite nanofibrous membrane with superhydrophobic and superoleophilic surface for high-efficiency cooking fumes capture

Air filtration in the free molecular flow regime: a review of high-efficiency particulate air filters based on carbon nanotubes.

Carbon nanotube based Janus composite membrane of oil fouling resistance for direct contact membrane distillation

Fabrication and oil adsorption of carbon nanotube/polyvinylpyrrolidone surface composite.

Carbon Nanotubes / Activated Carbon Fiber Based Air Filter Media for Simultaneous Removal of Particulate Matter and Ozone

Robust and Highly Efficient Free‐Standing Carbonaceous Nanofiber Membranes for Water Purification

Hierarchical carbon-nanotube/quartz-fiber films with gradient nanostructures for high efficiency and long service life air filters

Spatial confined growth of carbon nanotubes in pore channels of microporous ceramic supports with improved filtration efficiency

In Situ Fabrication Of Depth-Type Hierarchical Cnt/Quartz Fiber Filters For High Efficiency Filtration Of Sub-Micron Aerosols And High Water Repellency

A high efficiency particulate air filter based on agglomerated carbon nanotube fluidized bed

Removal of Carbon Nanotubes from Aqueous Environment with Filter Paper.

Durable CNTs Reinforced Porous Electrospun Superhydrophobic Membrane for Efficient Gravity Driven Oil/Water Separation

Enhanced Antifouling Performance for Modified Carbon Nanotubes Filtration Cathode by the Electric Field

A soft and recyclable carbon nanotube/carbon nanofiber hybrid membrane for oil/water separation

Electrochemical Carbon Nanotube Filter Oxidative Performance As A Function of Surface Chemistry

PAN/PAN-FPU Double-Layer Composite Nanofiber Air Filter Fabricated by Electrospinning for Filtering Oil and Salt Particles

Carbon nanotube filter functionalized with MIL-101(Fe) for enhanced flow-through electro-Fenton

Methods of Using Carbon Nanotubes As Filter Media to Remove Aqueous Heavy Metals