Abstract:The maximization of the mixing entropy with the optimal range of enthalpy in high-entropy alloys (HEAs) can promote the formation of a stable single solid-solution phase with the absence of competing intermetallic compounds. The resultant effects, such as lattice distortion, can contribute to excellent mechanical properties, which has motivated numerous efforts to develop and design single-phase HEM. However, challenges still remain, particularly on quantifying the lattice distortion and relating it to materials properties. In this study, we have developed a NbTaTiV refractory HEA with a single body-pcentered-cubic (BCC) structure using an integrated experimental and theoretical approach. The theoretical efforts include thermodynamic modeling, i.e., CALculation of PHAse Diagram (CALPHAD). The microstructural evolutions have been investigated by systematic heat-treatment processes. The typical dendrite microstructure was observed, which is caused by the elemental segregation during the solidification in the as-cast condition. The structural inhomogeneity and chemical segregation were completely eliminated by the proper homogenization treatment at 1200 degrees C for 3 days. The homogeneous elemental distribution was quantitatively verified by the Atom Probe Tomography (APT) technique. Importantly, results indicate that this HEA exhibits the high yield strength and ductility at both room and high temperatures (up to 900 degrees C). Furthermore, the effects of the high mixing entropy on the mechanical properties are discussed and quantified in terms of lattice distortions and interatomic interactions of the NbTaTiV HEA via first-principles calculations. It is found that the local severe lattice distortions are induced, due to the atomic interactions and atomic-size mismatch in the homogenization-treated NbTaTiV refractory HEA. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Large Relrod Extension Induced by Lattice Distortion in High Entropy Alloy

Local Lattice Distortion in High-Entropy Alloys

Chemical composition dependent local lattice distortions and magnetism in high entropy alloys

Multifunctional High Entropy Alloys Enabled by Severe Lattice Distortion

Lattice distortion effect on elastic anisotropy of high entropy alloys

Impacts of Atomic Scale Lattice Distortion on Dislocation Activity in High-Entropy Alloys

Mining of lattice distortion, strength, and intrinsic ductility of refractory high entropy alloys

Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy

An Analytical Model to Quantify the Local Lattice Distortion of Refractory High Entropy Alloys

Lattice Distortion in a Strong and Ductile Refractory High-Entropy Alloy

Three-dimensional atomic positions and local chemical order of medium- and high-entropy alloys

Anomalous local distortion in BCC refractory high-entropy alloys

Elastic stability and lattice distortion of refractory high entropy alloys

Charge transfer effect on local lattice distortion in a HfNbTiZr high entropy alloy

Probing local lattice distortion in medium- and high-entropy alloys

Correlating Local Lattice Distortion with Dislocation Pinning in Refractory High-Entropy Alloys

Unveiling the atomic-scale origins of high damage tolerance of single-crystal high entropy alloys

Anomalous dislocation response to deformation strain in CrFeCoNiPd high-entropy alloys with nanoscale chemical fluctuations

Lattice distortion in high‐entropy carbide ceramics from first‐principles calculations

Method to identify the phase structures of high entropy alloys with modified lattice distortion enthalpy

Uncovering heterogeneity of local lattice distortion in TiZrHfNbTa refractory high entropy alloy by SR-XRD and EXAFS