Abstract:Ce: GdYAG ceramics and CaAlSiN3: Eu2+ phosphor were fabricated by solid-state reaction. CaAlSiN3: Eu2+ phosphor films with different content were manufactured on Ce: YAG ceramic by the spin-coating method. The Ce: YAG ceramics doping with different Gd3+ content is labeled as Gd-doping structure. The red phosphor film placing Ce: YAG ceramic close to the chips is labeled as R-Y structure, similarly, the red phosphor film adjacent to the chips is named as Y-R structure. The main emission peak has redshift with Gd content increase. The PL spectra have a shift to the red region with the increasing of the red phosphor content in the R-Y structure and Y-R structure. As-prepared samples were further fixed on the substrate to manufacture the ceramic covered film (CCF)-based LEDs and ceramic-based LEDs. The color temperature can be regulated through the three structure. The luminous efficacy in the R-Y structure, Y-R structure, and Gd-doping structure is 89.16 lm/w, 86.8 lm/w, and 62.9 lm/w at about 3500K, respectively. The CRI in the R-Y structure, Y-R structure, and Gd-doping structure is 64.6,68.8, and 62.2 at about 3500K, respectively. The temperature in the R-Y structure, Y-R structure, and Gd-doping structure 83.3 degrees C, 81 degrees C, and 124.7 degrees C at about 3500K, respectively. The heat dissipation capability of R-Y structure and Y-R structure are superior to that of the Gd-doping structure. The result shows that the R-Y structure has the best luminous efficacy at a similar CCT which improved 41.7% comparing to the Gd-doping structure. The Y-R structure has the best CRI (improve 10.6% comparing to the Gd-doping structure) and heat dissipation capability (decreased 35.1% comparing to the Gd-doping structure) at a similar CCT. The way of Ce: YAG ceramic coated CaAlSiN3: Eu2+ phosphor will be a promising candidate to achieve warm white for high power LEDs.

A Flux-Free Method for Synthesis of Ce3+-Doped Yag Phosphor for White Leds

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Facile Synthesis of Ce3+, Eu3+ Co-Doped Yag Nanophosphor for White Light-Emitting Diodes

Growth and characteristics of Ce3+ ions-doped YAG single-crystal optical fibers for LED white light sources

Synthesis, crystal structure and luminescence properties of a Y4Si2O7N2:Ce3+ phosphor for near-UV white LEDs

Effects of Sintering Route and Flux on the Luminescence and Morphology of YAG: Ce Phosphors for White Emitting-Light Diodes (Leds)

Synthesis of High-Performance YAG:Ce Phosphor Powder with Low Sintering Temperature and YAG:Ce-Doped Bi-B Glass by a One-Step Method

Optimization of Ce 3+ concentration and Y 4 MgSi 3 O 13 phase in Mg 2+ ‐Si 4+ Co‐doped Ce: YAG ceramic phosphors

Crystal Structure and Photo-Luminescence of Gd3Ga2(Al3-ySiy)(O12-yNy):Ce3+ Phosphors for AC-warm LEDS

The effect of Lu3+ doping upon YAG:Ce phosphor ceramics for high-power white LEDs

The effects of Lu3+, Gd3+ and Ga3+ substitution on the photoluminescence of Y2.95- x- yLuxGdyAlzGa5- zO12:0.05Ce3+ phosphors for high-power white AC-LEDs

Ce:YScAG Phosphor-Converted Transparent Ceramics with High Thermal Saturation and Weak Concentration Quenching for LED and LD White Lighting

The application YAG:Ce3+@SiO2 phosphor for improving color deviation of phosphor-converted light-emitting diode

(Sr, Ca)AlSiN3:Eu2+ Phosphor-Doped YAG:Ce3+ Transparent Ceramics as Novel Green-Light-Emitting Materials for White LEDs

Color Converter Based on Transparent Ce:YAG Ceramic by Different Package Structure for High-Power White LED

Synthesis of YAG:Ce phosphor by impinging streams co-precipitation method

Effect of boron carbide (B4C) on luminescent efficiency and thermal stability of Y3Al5O12:Ce3+ phosphors

Brownish Red Emitting YAG:Ce3+,Cu+ Phosphors for Enhancing the Color Rendering Index of White LEDs

Ce3+ Doped Al2O3-YAG Eutectic as an Efficient Light Converter for White LEDs

Flux-grown Y3Al5O12:Ce3+ phosphors with improved crystallinity and dispersibility

Tailored Photoluminescence of YAG:Ce Phosphor Through Various Methods