Abstract:Propeller body-force model is a low-cost tool for numerical simulation of the ship self-propulsion test compared with discretized propeller model. As one of the most traditional theories of propeller model, Blade Element Momentum Theory (BEMT) has been proved to have considerable application potential with stability and accuracy. However, it's still hard for BEMT to keep accuracy in a relatively large range of working conditions due to unproved prior assumptions, which limits the application of BEMT in complex inflow conditions like ship self-propulsion. In the application of BEMT, the calculation method of Angle of Attack (AOA) has a great influence on the accuracy. In this paper, an "Agent Actuating Disk (AAD)" method is proposed to determine the AOA. AAD-BEMT method uses AAD to obtain the relationship between local velocity and inflow velocity so that the AOA can be defined by geometric Angle of Attack. This consideration avoids the inaccuracy of determining AOA by local velocity from discretized propeller flow field. The KP505 propeller open-water test is chosen to verify the accuracy of the proposed AAD-BEMT method. Then the numerical simulation of a KRISO Container Ship (KCS) self-propulsion test (Fr = 0.26) is carried out to investigate the performance of the AAD-BEMT body-force model as well as other different propeller models when dealing with non-uniform ship's wake. The open-water curve, propeller load distribution, and self-propulsion factor are presented and compared with the available experimental data. The results show that the predicted load distribution is accurate. In addition, not only the thrust and torque of the AAD-BEMT model can have a stable accuracy in a wide operating condition, but also the wake agrees well with the experimental result, which means that the proposed AAD-BEMT model can economically and accurately simulate the momentum transport of propeller under complex hull-propeller interaction condition.

Influence of the UUV Body on the Performance of the Propeller

Numerical Study on the Interaction between Ocean Current Power Generator and Unmanned Underwater Vehicle

A numerical research on the hydrodynamic performance of marine propellers with bionic coupled blade sections

A Numerical and Experimental Study on the Hull-Propeller Interaction of A Long Range Autonomous Underwater Vehicle

Unsteady Responses and Correlation Characteristics of Propeller Blades under Turbulence Excitation

Numerical study on hydrodynamic performance of an underwater propulsive wing propulsor

Hydrodynamic Performance Of A Flapping Wing Based Auv-A Numerical Study

Numerical study of the hydrodynamic performances of surface piercing propeller

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Numerical analysis of the influence of immersion ratio on the hydrodynamic characteristics of surface piercing propeller

Vibro-acoustic Analysis of a Cylindrical-Conical Hull Subjected to Propeller Forces

The Hydroelastic Analysis of Marine Propellers Considering the Effect of the Shaft: Theory and Experiment

An Improved BEMT Model Based on Agent Actuating Disk with Application to Ship Self-Propulsion Simulation

Coupling of RANS and BEM Solvers for Simulation of Propeller Behind the Hull in Full Appended Model

Influence of Free Surface on the Hydrodynamic and Acoustic Characteristics of a Highly Skewed Propeller

Hydrodynamic Coefficient Estimation of Small Autonomous Underwater Vehicle

Numerical Investigation on Hydrodynamic Performance of a Ducted Propeller for Vectored Underwater Robot

Dynamic Investigation of the Influence of Propeller on the Vibro-Acoustic Characteristics of Marine Propulsion Systems

Numerical Prediction of Propulsive Performance with an Iterative Body-Force Propeller Model

The Hydroelastic Analysis of Marine Propellers with Consideration of the Effect of the Shaft

A Numerical Investigation into the Influence of Bionic Ridge Structures on the Cavitation Performance of Marine Propellers