Abstract:Mechanical properties and thermal resistance reinforcement were achieved by a one-step dipping method, in which an aniline-methyl-triethoxysilane (AMT) coupling agent was grafted onto the carbonaceous fiber (CF) to fabricate CF/silicone resin (SR) composite coatings . Micromorphology and structure analysis of carbonaceous fibers showed that the AMT modification increase the roughness and the uniformity on the fiber surface, resulting in the link between AMT and fiber surface, and the polysiloxane formation by polymerization between the Si-OH groups. The AMT modification of the fiber surface introduced the AMT with a disordered structure on the fiber surface and improved the compatibility between CFs and SR. Mechanical testing showed that the tensile strength and elongation rate of the coating containing CF modified with 1wt%AMT coupling agent was increased by 45.32 % and 19.07 % compared with that of the unmodified one, respectively. The reinforcing mechanism revealed that the AMT modification improved interfacial bonding and mechanical riveting. Besides, the thermogravimetric analysis (TGA) analysis showed that the siloxane layer crosslinked at a high temperature, which was conducive to improving the thermal resistance for the long-term stability of the composite coatings. This special treatment provides an idea for simultaneously improving the mechanical properties and thermal resistance of silicone composites.

DIAMINO POLYSILOXANE MODIFIED MULTI-WALL CARBON NANOTUBES/SILICONE RUBBER COMPOSITE

A Simple Polymerizable Polysoap Greatly Enhances the Grafting Efficiency of the “Grafting-To” Functionalization of Multiwalled Carbon Nanotubes

Hindered phenol grafted carbon nanotubes for enhanced thermal oxidative stability of polyethylene

Chemical modification of carbon fiber with diethylenetriaminepentaacetic acid/halloysite nanotube as a multifunctional interfacial reinforcement for silicone resin composites

SOLUBILITY IMPROVEMENT AND SURFACE FUNCTIONALIZATION OF MULTI-WALLED CARBON NANOTUBES BY A THIOL-FUNCTIONALIZED POLY(PHENYLACETYLENE) DERIVATIVE

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Carboxyl-terminated Butadiene-Acrylonitrile-toughened Epoxy/carboxyl-Modified Carbon Nanotube Nanocomposites: Thermal and Mechanical Properties

Morphological and Mechanical Properties of Bile Salt Modified Multi-Walled Carbon Nanotube/poly(vinyl Alcohol) Nanocomposites

Effect of hydrophilically functionalized carbon nanotubes on the reinforcement of water-borne epoxy resin.

Thermo-Physical Properties of Epoxy Nanocomposites Reinforced with Amino-Functionalized Multi-Walled Carbon Nanotubes

In Situ Polymerization Approach to Multiwalled Carbon Nanotubes Reinforced Polyundecanoylamide Composites

Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance

Effect of in situ silanization of multiwalled carbon nanotubes on the properties of NBR/MWCNT-OH composites

Simultaneous improvement of interfacial bonding and thermal resistance of carbonaceous fiber/silicone composite coatings modified with aniline-methyl-triethoxysilane

Single-Walled Carbon Nanotubes Functionalized with High Bonding Density of Polymer Layers and Enhanced Mechanical Properties of Composites

Modification Of Nano-Fibriform Silica By Dimethyldichlorosilane

Carbon nanotubes grafted by polyurethane chains with dopamine-mediation to enhance the mechanical and damping properties of polyurethane elastomer

Thermomechanical properties of multifunctional polymer hybrid nanocomposites based on carbon nanotubes and nanosilica

Synthesis and properties of the amino-functionalized multiple-walled carbon nanotubes/polyimide nanocomposites

Fabrication and Characterization of Soluble Multi‐Walled Carbon Nanotubes Reinforced P(MMA‐co‐EMA) Composites

STUDY ON POLYMER SHEATHING ON MULTI-WALL CARBON NANOTUBES