Abstract:Stability and high energy densities are essential qualities for emerging battery electrodes. Because of its high specific capacity, silicon has been considered a promising anode candidate. However, the several-fold volume changes during lithiation and delithiation leads to fractures and continuous formation of an unstable solid-electrolyte interphase (SEI) layer, resulting in rapid capacity decay. Here, we present a carbon-silicon-carbon (C@Si@C) nanotube sandwich structure that addresses the mechanical and chemical stability issues commonly associated with Si anodes. The C@Si@C nanotube array exhibits a capacity of ∼2200 mAh g(-1) (∼750 mAh cm(-3)), which significantly exceeds that of a commercial graphite anode, and a nearly constant Coulombic efficiency of ∼98% over 60 cycles. In addition, the C@Si@C nanotube array gives much better capacity and structure stability compared to the Si nanotubes without carbon coatings, the ZnO@C@Si@C nanorods, a Si thin film on Ni foam, and C@Si and Si@C nanotubes. In situ SEM during cycling shows that the tubes expand both inward and outward upon lithiation, as well as elongate, and then revert back to their initial size and shape after delithiation, suggesting stability during volume changes. The mechanical modeling indicates the overall plastic strain in a nanotube is much less than in a nanorod, which may significantly reduce low-cycle fatigue. The sandwich-structured nanotube design is quite general, and may serve as a guide for many emerging anode and cathode systems.

Porous Si@C Coaxial Nanotubes: Layer-by-layer Assembly on ZnO Nanorod Templates and Application to Lithium-Ion Batteries

Rational Design of Coaxial MWCNTs@Si/SiOx@C Nanocomposites As Extending-Life Anode Materials for Lithium-Ion Batteries

In Situ Synthesis of Carbon Doped Porous Silicon Nanocomposites As High-Performance Anodes for Lithium-Ion Batteries.

Porous Znco2o4 Nanowires Synthesis Via Sacrificial Templates: High-Performance Anode Materials Of Li-Ion Batteries

Facile Synthesis of Uniform Mwcnt@Si Nanocomposites As High-Performance Anode Materials for Lithium-Ion Batteries

Layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods with high reversible capacity in lithium-ion batteries.

Cnts@Sno2@C Coaxial Nanocables with Highly Reversible Lithium Storage

Controllable Preparation to Boost High Performance of Nanotubular SiO2@C as Anode Materials for Lithium-Ion Batteries

Strongly Coupled 1d Sandwich-Like C@Fe3o4@C Coaxial Nanotubes With Ultrastable And High Capacity For Lithium-Ion Batteries

Lithium-storage properties of SiO 2 nanotubes@C using carbon nanotubes as templates

Facile Synthesis of Core-Shell Structured SiO2@Carbon Composite Nanorods for High-Performance Lithium-Ion Batteries

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Stable Cycling of SiO2 Nanotubes As High-Performance Anodes for Lithium-Ion Batteries

Facile Synthesis of Hierarchical SiOx/NiO/Carbon Nanotube Structure as Negatrode Materials for Lithium-Ion Batteries

Mechanically and chemically robust sandwich-structured C@Si@C nanotube array Li-ion battery anodes

Synthesis of carbon-SiO2 hybrid layer @ SiO2 @ CNT coaxial nanotube and its application in lithium storage

SiOx and carbon double-layer coated Si nanorods as anode materials for lithium-ion batteries

MOF-Derived ZnO Nanoparticles Covered by N-Doped Carbon Layers and Hybridized on Carbon Nanotubes for Lithium-Ion Battery Anodes.

Carbon Nanotube@layered Nickel Silicate Coaxial Nanocables As Excellent Anode Materials for Lithium and Sodium Storage

Morphology-Controlled Synthesis of Sno2 Nanotubes by Using 1d Silica Mesostructures As Sacrificial Templates and Their Applications in Lithium-Ion Batteries

Phase-separation-driven Formation of Nickel–Cobalt Oxide Nanotubes As High-Capacity Anode Materials for Lithium-Ion Batteries