Abstract:The elastic stress and strain fields in a plate of finite thickness containing an elliptical hole are systematically investigated using the 3D finite element method. It is found that the stress and strain concentrations are different in the plate of finite thickness even if the plate is in an elastic state. The relation between the stress and the strain concentration factors depends on Poisson’s ratio, the hole’s geometric configuration and the plate thickness. The stress concentration factor is equal to the strain concentration factor only at the notch root of the plate surface. The stress (or strain) concentration factor at the notch root of the plate surface decreases rapidly with increasing thickness and becomes lower than the stress and strain concentration factors corresponding to the plane stress state or at the notch root of the mid plane. It is too low to reflect the overall stress concentration as the thickness increases or as the b/a ratio decreases. The maximum stress concentration factor occurs on the mid plane only when the plate is thinner than the transition thickness of the stress concentration factor. When the plate is thicker than the transition thickness of the stress concentration factor, the distance between the location of the maximum stress concentration factor and plate surface tends to be constant with increasing thickness for the plate with a given b/a ratio. The differences between the maximum value and the surface value of the stress and strain concentration factors increase rapidly and tend to their respective constant values with increasing plate thickness. The smaller the b/a ratio, the larger these differences. The difference of the stress concentration factor is larger than that of the strain concentration factor in the same plate.

The size effect on the concentration of stress and strain in finite thickness elastic plate containing a circular hole

The concentration of stress and strain in finite thickness elastic plate containing a circular hole

The Stress and Strain Concentrations Associated with Two Interacting Holes in A Finite Thickness Elastic Plate Subjected to Tensile Stress

The Stress and Strain Concentrations of an Elliptical Hole in an Elastic Plate of Finite Thickness Subjected to Tensile Stress

The Stress and Strain Concentrations of Out-of-plane Bending Plate Containing a Circular Hole

The Effect of Biaxial Load on Stress and Strain Concentrations in a Finite Thickness Elastic Plate Containing a Circular Hole

Three-Dimensional Elastic Stress Fields of Finite Thickness Plates with Elliptical Hole

The Coupled Effects of Thickness and Distance Between Holes on Stress and Strain Concentrations of Uniaxially Loaded Tensile Plates

Three-Dimensional Elastic Stress Fields in Finite Thickness Plate with a Hole

Unified Solution of a Borehole Problem with Size Effect

The Interaction of Holes on Stress and Strain Concentrations in Uniaxially Loaded Tensile Plates

Stress Concentration Around A Cylindrical Hole In Arbitrary Thick Plates

Analytical Studies on Stress Concentration Due to a Rectangular Small Hole in Thin Plate under Bending Loads

Effect of a Small Rectangular Hole on Stress Concentration of Thin Plate under Bending Loads

The stress concentration effect around the hole in flat plate

Experimental and Theoretical Evaluation of Influence of Hole Size on Deformation and Fracture of Elastic Perforated Plate

Stress Concentration of Periodic Collinear Square Holes in an Infinite Plate in Tension.

A Study of Stress Concentration Factors for Tension Semi-infinite Plate with a Circular Hole

Strain Concentrations and Progressive Damage Analysis of Notched Composite Laminates

The Stress Concentration in Finite-Size Plates Containing Elliptical Holes with a Direct Solution of Complex Series

Effect of Thinckness on Residual Stress Fields of Cold Expansion Hole