Research and development on the air-core coil sensor for mine transient electromagnetic exploration
Lin Jun,Wang Lin,Wang Xiao-Guang,Cai Min,Fu Lei,Shang Xin-Lei
DOI: https://doi.org/10.6038/cjg20160229
2016-01-01
Abstract:The interior space of mine is narrow, and many roadways' width and height are less than 2 meters. At present, overlapping multi-turn device is mainly used in the mine transient electromagnetic method, of which the shape and area is not fixed, so it can not guarantee the correctness of the received signal. Its data processing and geological interpretation are essentially based on ground half-space transient electromagnetic method, which has many technical problems to be solved at the application level. For the limitation of the detection space and the whole space distribution of detected target in the mine transient electromagnetic method, this paper developed a kind of inductive air-core coil sensors suitable for this method. The effective area of the sensor at home and abroad meets the requirements of the mine, but the bandwidth is too narrow. And the blind spot is too long, which limits the scope of the mine transient electromagnetic detection. So it is significant to develop a kind of inductive sensor suitable for the mine transient electromagnetic detection. According to the needs of the mine transient electromagnetic detection, the basic technical indicators of the inductive air-core coil sensor are determined. By analyzing the physical structure of the air-core coil and the equivalent noise circuit of the pre-amplifier circuit, the main source of introduced noise is obtained. Constructing the equivalent model of inductive air-core coil sensor, we realize the analysis of the amplitude-frequency characteristics and low noise of the sensor, and give the regular pattern of each noise source which affects the noise level of sensor with frequency. The method of reducing the sensor noise in the mine transient electromagnetic detection is designed, with which the SNR (signal to noise ratio) of the sensor at the resonant frequency improves 15.6 dB. Test results showed that the noise performance and output characteristics of inductive air-core coil sensor surpasses 3D-1HF-coil sensor of Canada's Geonics, which meets the needs of mine transient electromagnetic detection. Inductive sensor has been used as a key component of transient electromagnetic receiving system, and its noise level determines the minimum resolution of the received signal directly, which affects the result of the detection. In the production of the air-core coil, a LCR equivalent model is established. Winding the coil hierarchically and segmentally can reduce the distributed capacitance and inductance of the coil, which thereby increases the resonant frequency and broadens the response bandwidth. Small size, wide bandwidth, large effective area and low noise inductive air core coil sensors are designed for the whole space response of limited space inside the mine. In this paper, a air-core coil sensor with mean diameter of 0.6 m, equivalent area of 30 m(2), bandwidth of 700 kHz is produced based on the study of the equivalent model, frequency characteristics, and the noise model.