Abstract:Natural gas hydrates (NGH) are ice-like crystalline solids formed with water and gas (CH, mostly) at low temperature and high pressure, which are usually present in ocean and seabed sediments or permafrost regions. NGH are a potential and clean energy resource with great amounts especially in ocean regions. Although the reserves of NGH in permafrost regions are smaller than ocean regions, their cover and trap of upper frozen soil layers, and shallow and certain storage depth, make NGH exploration in these regions easy with less threat of gas leakage. In permafrost regions, NGH usually developed in rock fractures, cracks and lamination interlayers. As the hydrate is an electricity insulator, the considerable resistivity differences between the hydrate and strata make the NGH reservoirs show obvious electrical anisotropy.This paper presents a typical simplified reservoir model, in which the resistive NGH layers are interbeded with conductive strata. Hence the electrical anisotropy exists and can be expressed by horizontal resistivity and vertical resistivity jointly. The audio-frequency magnetotelluric method (AMT) can be used to infer subsurface conductivity structure by measuring 2 horizontal components of the natural electric field and 2 horizontal and 1 vertical components of the natural magnetic field at earth's surface. With shallow penetration depth including hydrates layers' range, short measuring time and small cost, AMT is a useful tool for investigation of NGH reservoirs. In this paper, a 2D AMT forward modeling method considering triaxial anisotropy is applied to examine the response characteristics of anisotropic NGH reservoirs in permafrost regions. Two synthetic models are presented, one is an 1D layer model and the other is a 2D block model, and both overly a relatively high resistivity layer representing a resistive frozen layer. In the 1D model, responses in xy mode differ from yx mode, which prove the existence of anisotropy. In the 2D model, while the width and depth become larger or smaller, the apparent resistivity and phase responses change correspondingly. The responses are also sensitive to the hydrate saturation and the block distribution in both models, showing significant differences between the original one and that without the frozen layer above. The overlying resistive layer becomes an electromagnetic disturbance to the underlying structure, and makes the electrical anomaly of the anisotropic block less obvious. Nonetheless, the main structure characteristics and the response of the block anomaly remain similar in spite of the existence of the overlying frozen layer. The results show the anisotropy phenomenon can change apparent resistivity and phase responses behavior with different model parameters. It is proved that AMT is an effective method to prospect NGH reservoirs in permafrost regions and the study about electrical anisotropy can provide some new insights into the NGH exploration both in land and marine areas.

Characteristics of AMT Response of Anisotropic Natural Gas Hydrate Reservoirs in Permafrost Regions

One-dimensional Analytical Model for Thermo-Hydro-mechanical Coupling Behaviour of Hydrates Overlying Layer During Gas Production

Comparative study of the electrical characteristics of hydrate reservoirs before and after gas hydrate trial production in the Muli permafrost area of the Qilian Mountains, NW China

Exploration of Permafrost with Audiomagnetotelluric Data for Gas Hydrates in the Juhugeng Mine of the Qilian Mountains, China

Role of Mechanical Deformation in the Thermal Transport of Si-Type Methane Hydrate.

Numerical simulation of resistivity and saturation estimation of pore-type gas hydrate reservoirs in the permafrost region of the Qilian Mountains

Inert Gas—A New Geochemical Technology for Natural Gas Hydrate Exploration in Midlatitude Permafrost

Investigation on permeability anisotropy in unconsolidated hydrate-bearing sediments based on pore-scale numerical simulation: Effect of mineral particle shape and pore-filling

A Study on Magnetotelluric Characteristics of Magmatic Geothermal Systems

Experimental Investigation into Three-Dimensional Spatial Distribution of the Fracture-Filling Hydrate by Electrical Property of Hydrate-Bearing Sediments

Numerical Analysis of Gas Production from Reservoir-Scale Methane Hydrate by Depressurization with a Horizontal Well: the Effect of Permeability Anisotropy

Characterizing Anisotropy Changes in the Permeability of Hydrate Sediment

Marine CSEM 3D Modeling with a Downhole Dipole Source for Natural Gas Hydrate Production Monitoring

Time-dependent deformation of marine gas hydrate-bearing strata conditioned to a wellbore: Experiments and implications

Numerical Analysis of Depressurization Production of Natural Gas Hydrate from Different Lithology Oceanic Reservoirs with Isotropic and Anisotropic Permeability

Analysis of Reservoir Stability During Natural Gas Hydrate Exploitation under Incline Seafloor

Anisotropy analysis of two-phase flow permeability in the multi-stage shear process of hydrate-bearing sediments

Numerical Simulation of the Effect of Porous Media Permeability on the Decomposition Characteristics of Natural Gas Hydrate at the Core Scale

Effect of Hydrate Saturation on Permeability Anisotropy for Hydrate-Bearing Turbidite Sediments Based on Pore-Scale Seepage Simulation

Preface: Special Topics on Study Progress of Natural Gas Hydrate

Research on Resistivity Characteristics of Grain-coating and Pore-filling Hydrates in Different Sediment Packings Based on Voxelated 3D Models