Abstract:In this study, we successfully synthesized a TiO2/CuO nanocomposite using the aqueous extract of Impatiens tinctoria A.rich. leaf extract as a capping, reducing, and stabilizing agent for the first time in an environmentally friendly, low-cost, straightforward, and sustainable technique. Numerous characterization techniques such as ultraviolet-visible diffuse reflectance spectroscopy (UV-vis-DRS), photoluminescence (PL), Raman spectroscopy, Fourier-transform infrared (FTIR), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and high resolution TEM (HRTEM) were used to characterize the obtained TiO2/CuO nanocomposite. XRD verified that the TiO2/CuO nanocomposite has an average crystallite size of about 21 nm. The TEM result revealed an average particle size of 29 nm for the biosynthesized TiO2/CuO NC. The HRTEM analysis showed the presence of polycrystalline structures with the predominant lattice fringes 0.352 and 0.19 which were attributed to anatase phase TiO2 in the crystal plane of (101) and (200), respectively. The lattice fringes for monoclinic CuO were observed with values of 0.213 and 0.252 for the lattice planes of (111) and (111̅), respectively. The photoluminescence spectroscopic analysis revealed that the TiO2/CuO NC showed the lowest intensity compared to the pristine TiO2 and CuO indicating the reduction of exciton recombination in the case of the TiO2/CuO NC. The BET analysis showcased the formation of mesoporous materials with a surface area of 87.5 m2/g. The photocatalytic degradation performance of the biosynthesized TiO2, CuO, and TiO2/CuO nanomaterials against the potentially harmful MB dye was tested using the light source of a 150 tungsten-halogen lamp with a wavelength range of 360-2800 nm. The factors affecting photodegradation efficiencies like catalyst dose (20 mg), dye concentration(15 ppm), pH (9), and reaction time (90 min) were optimized for the degradation of the MB dye. The TiO2/CuO catalyst showed the highest degradation efficiency of 99% under the optimized conditions. The degradation rate of the MB dye in the presence of the TiO2/CuO NC was evaluated and found to be fitted to the pseudo-first-order kinetics with a rate constant of 0.03 min-1. The reusability test of the TiO2/CuO catalyst showed its good stability.

High Efficient Cu2O/TiO2 Nanocomposite Photocatalyst to Degrade Organic Polluant under Visible Light Irradiation

Nanoporous core–shell Cu@Cu2O nanocomposites with superior photocatalytic properties towards the degradation of methyl orange

Highly-enhanced Performance of TiO 2 Nanotubes Attached with CdS quantum Dots

Enhanced Optical Absorption and Photocatalytic Activity of Cu/N-Codoped Tio2 Nanocrystals

Metal-organic frameworks derived TiO2/carbon nitride heterojunction photocatalyst with efficient catalytic performance under visible light

Photocatalytic Degradation of the Reactive Brilliant Red and Its Mechanism over Nano-sized TiO2-Cu2O Under Visible Irradiation

Enhanced photocatalytic activity of Cu2O for visible light-driven dye degradation by carbon quantum dots

Preparation of organic porous materials-TiO2/cu composite with excellent photocatalytic degradation performances toward degradation of organic pollutants in wastewater

UiO-66-NH2/Cu2O composite as an enhanced visible light photocatalyst for decomposition of organic pollutants

A Novel Heterojunction CuWO4/g-C3N4 Photocatalyst for Removal of Organic Pollutant under Visible Light Irradiation

Au/TiO2/Graphene Composite with Enhanced Photocatalytic Activity Under Both UV and Visible Light Irradiation

Preparation of C@CuNi/TiO 2 with a local surface plasmon resonance for photocatalytic degradation of organic dyes and antibiotics under visible light irradiation

Directly electrospinning synthesized Z-scheme heterojunction TiO2@Ag@Cu2O nanofibers with enhanced photocatalytic degradation activity under solar light irradiation

Preparation and Enhanced UV Visible Light Photoelectrocatalytic Activity of TiO2 Fe2O3/Cu Ternary Nanocomposites

Biosynthesis of TiO2/CuO and Its Application for the Photocatalytic Removal of the Methylene Blue Dye

Efficient photocatalysis of Cu doped TiO2/g-C3N4 for the photodegradation of methylene blue

Synthesis and properties of Sm‐TiO 2 coupled with g‐C 3 N 4 for improved photocatalytic degradation toward methylene blue and tetracycline under visible‐light irradiation

Enhancement in Visible Light-Responsive Photocatalytic Activity by Embedding Cu-doped ZnO Nanoparticles on Multi-Walled Carbon Nanotubes

Enhanced photocatalytic performance of CuS/O,N-CNT composite for solar-driven organic contaminant degradation

Synthesis and Photoelectrocatalytic Applications of TiO2/ZnO/Diatomite Composites

Heterojunction PdO/CoS as a High-Performance Visible-Light Active Photocatalyst Elimination of Methylene Blue from Aqueous Media