Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Role of Molybdenum Oxide for Organic Electronics: Surface Analytical Studies

Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications

Formation of MoO 3 /Organic Interfaces

MoO x and V 2 O x as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices

Undoped Moox with Oxygen-Rich Vacancies As Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

Editorial: High-Performance Organic Thin-Film Transistors

Room-temperature sol-gel derived molybdenum oxide thin films for efficient and stable solution-processed organic light-emitting diodes.

Assistance of Partially Reduced Moo3 Interlayer to Hole-Injection at Iron Phthalocyanine/Ito Interface Evidenced by Photoemission Study

The role of molybdenum oxide as anode interfacial modification in the improvement of efficiency and stability in organic light-emitting diodes

Electroluminescence Performance Of Organic Light-Emitting Diode With Molybdenum Trioxide Inside Hole Transport Layer

In Situ and Ex Situ Investigation of the Organic-Organic Interface Effect

Transition Metal Oxides on Organic Semiconductors

Influence of Moisture on the Energy-Level Alignment at the MoO3/Organic Interfaces

Undoped MoO X with Oxygen-rich Vacancies as Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

High Performance Organic Field-Effect Transistor with Oxide/Metal Bilayer Electrodes

18.9% Efficiency Binary Organic Solar Cells Enabled by Regulating the Intrinsic Properties of PEDOT:PSS

Low-temperature MoO3 film from a facile synthetic route for an efficient anode interfacial layer in organic optoelectronic devices

Annealing-free alcohol-processable MoO anode interlayer enables efficient light utilization in organic photovoltaics

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells