Abstract:A method for solving the current challenges in manufacturing hetero-laminated material systems using Low Temperature Co-firing Ceramics (LTCC) technique is introduced in this paper. The system contains all three major materials that widely used in the LTCC industry, Zn2SiO4 ceramic, NiCuZn ferrite and silver. Previous reported methods either involve additional buffer layers which would increase the device thickness, or apply mechanical pressure during the co-firing which is not compatible to the standard LTCC process. Our method provides a facile route to manufacture hetero-laminated material systems that demands no buffer layer and follows the standard LTCC process. In this paper, four glass-free hetero-laminated material systems using LTCC technology, i.e. NiCuZn/Zn2SiO4/NiCuZn/Zn2SiO4/NiCuZn (termed “LTCC-5”), NiCuZn/Zn2SiO4-Ag/NiCuZn (termed “LTCC-3-NZAN”), NiCuZn/Ag/NiCuZn (termed “LTCC-3-NAN”) and NiCuZn/Zn2SiO4/NiCuZn (termed “LTCC-3-NZN”), have be were designed, manufactured and characterized. The shrinkage rates of these material systems show well-matched temperature spectrum. The sintering properties and interfacial diffusions of the material systems were characterized using optical microscopy, electron microscopy and Energy Dispersive Spectrometer (EDS) element mapping. Optical microscopy shows that all the material systems have well-defined multi-layered structure with controllable and tunable layer thickness. Electron microscopy images prove no microstructural cracks or defects at any of the hetero material interfaces. EDS analysis further proves that the inter-diffusions of the magnetic elements (Fe and Ni) at the NiCuZn/Zn2SiO4 interface is minimized. Such property is essential for achieving high performance devices for applications such as power inductors and DC/DC converters.

Cold Sintering and Co‐firing of a Multilayer Device with Thermoelectric Materials

Cofiring behavior of low-temperature sintering composite multilayer ceramic devices

Cold-Sintered ZnO Ceramic Composites Co-Doped with Polytetrafluoroethylene and Oxides

A Route towards Fabrication of Functional Ceramic/Polymer Nanocomposite Devices Using the Cold Sintering Process

Cold Sintering Na2Mo2O7 Ceramic with Poly(ether Imide) (PEI) Polymer to Realize High-Performance Composites and Integrated Multilayer Circuits

Cold Sintering Process of Composites: Bridging the Processing Temperature Gap of Ceramic and Polymer Materials

Hybrid low‐temperature sintering processes of electro‐ceramics

The Sintering Properties and Interfacial Investigation of Barium Ferrite and Ceramic Cofiring System for the Application of Ltcc Technology

Cold Sintered Ceramic Nanocomposites of 2D MXene and Zinc Oxide

Enhancing the thermoelectric performance of cold sintered calcium cobaltite ceramics through optimised heat-treatment

Dielectric Properties of an Ultra‐Low‐Temperature Cofiring Bi2Mo2O9 Multilayer

Cold Sintering Process: A New Era for Ceramic Packaging and Microwave Device Development

Cold sintered composites consisting of PEEK and metal oxides with improved electrical properties via the hybrid interfaces

A Co-Fireable Material System for Ceramics and Ferrites Hetero-Laminates in LTCC Substrates

Cold Sintering of ZnO-PTFE: Utilizing Polymer Phase to Promote Ceramic Anisotropic Grain Growth

Cold Sintering of Li6.4La3Zr1.4Ta0.6O12/PEO Composite Solid Electrolytes

CALPHAD Accelerated Design of Advanced Full-Zintl Thermoelectric Device

Large Thermal Expansion LTCC System for Cofiring with Integrated Functional Ceramics Layers

Modulation of electrical transport in calcium cobaltite ceramics and thick films through microstructure control and doping

Recent progress of cold sintering process on functional ceramic materials

Electrochemical assembly of single-walled carbon nanotube/polypyrrole/tellurium/lead telluride multi-layer nanocomposite films for room-temperature flexible thermoelectric application