Abstract:Bismuth ferrite nano‐ and microcrystals were prepared by a facile molten salt technique in two kinds of molten‐salt‐based systems (NaCl–KCl and NaCl–Na2SO4). In the NaCl–KCl salt system, a systematic study indicating the effects of process parameters (e.g., calcination temperature, holding time as well as the molten salt ratios) on the bismuth ferrite formation mechanism and structural characteristics is reported. The results show that almost pure phase BiFeO3 powders with minimum impurity phase of Bi2Fe4O9 were synthesized at temperatures of 700°C–800°C, whereas high calcination temperature (e.g., 900°C) resulted in the formation of almost pure phase Bi2Fe4O9 powders. The prolonged holding time increased the particle size via the Ostwald ripening mechanism; however, there was little effect on the particle morphology. Similar phenomenon occurred as increasing the molten salt ratios. In the NaCl–Na2SO4 salt systems, it is found that low NP‐9 (nonylphenyl ether, NP‐9) surfactant content (0–5 mL) led to the formation of almost pure phase BiFeO3 powders, whereas high NP‐9 surfactant content (e.g., 20 mL) resulted in pure phase Bi2Fe4O9 powders. The average particle size of the BiFeO3 powders was decreased as increasing the NP‐9 surfactant content, whereas their morphologies did not change significantly. Because of the simplicity and versatility of the approach used, it is expected that this methodology can be generalized to the large‐scale preparation of other important transitional metal oxides with controllable sizes and shapes.

Alkali Metal Ions‐Assisted Controllable Synthesis of Bismuth Ferrites by a Hydrothermal Method

Effect of poly sodium-p-styrenesulfonate on the phase formation and morphology of the hydrothermally synthesized bismuth ferrite powders

Tunable Synthesis of Bismuth Ferrites with Various Morphologies

Phase and Morphology Evolution of Bismuth Ferrites Via Hydrothermal Reaction Route

Hydrothermal synthesized bismuth ferrites particles: thermodynamic, structural, and magnetic properties.

Selective Synthesis on Structures and Morphologies of Bixfeyoz Nanomaterials with Disparate Magnetism Through Time Control

Controllable microwave hydrothermal synthesis of bismuth ferrites and photocatalytic characterization

Hydrothermal synthesis and magnetic properties of bismuth ferrites nanocrystals with various morphology

Molten Salt Synthesis of Bismuth Ferrite Nano‐ and Microcrystals and Their Structural Characterization

Hydrothermal Synthesis and Characterization of Perovskite Bismuth Ferrite Powders

Hydrothermal Synthesis of Single-Crystal Bismuth Ferrite Nanoflakes Assisted by Potassium Nitrate

HYDROTHERMAL SYNTHESIS AND PHYSICAL PROPERTIES OF NANO-STRUCTURED BISMUTH FERRITES

Hydrothermal Synthesis and the Structural, Morphologic and Magnetic Characteristics of Mn Doped Bismuth Ferrite Crystallites

Low‐temperature Preparation of Bismuth Ferrite Microcrystals by a Sol‐gel‐hydrothermal Method

Microstructure and Enhanced Magnetic Properties of Low-Temperature Sintered LiZnTiMn Ferrite Ceramics with Bi2O3-Al2O3 Additive

Shape-controlled hydrothermal synthesis of ferroelectric Bi 4Ti3O12 nanostructures

Microwave-Hydrothermal Synthesis and Structural Characterization of Multiferroic Bismuth Ferrite Nanostructures

Low Temperature Polymer Assisted Hydrothermal Synthesis of Bismuth Ferrite Nanoparticles

Effect on Structural, Morphological, and Magnetic Hysteresis of Ni2+–Zr4+ Co-Substituted Barium Hexaferrites by Hydrothermal Synthesis

Kinetically Controlled Synthesis of Bismuth Tungstate with Different Structures by a NH4F Assisted Hydrothermal Method and Surface-Dependent Photocatalytic Properties.

Compositional Control and Millimeter Wave Properties of Micro-/Nano-Sized M-Type Barium Hexaferrite Bafe12o19 Synthesized by Hydrothermal Method