Abstract:With increasing train speeds, the wind environment along routes has become complex, variable, and extreme. Constructing windbreak facilities is an effective strategy to enhance train operational safety in windy zones. Various windbreak designs exhibit notable differences in improving train dynamic performance, and economic considerations are also crucial. Utilizing the non-constant compressible Reynolds time-averaged equation URANS (Unsteady Reynold-averaged Navier–Stokes) alongside the shear-stress transport (SST) k-ω turbulence model, this study simulates the non-constant aerodynamic characteristics of a 350 km/h high-speed train traversing through different forms of windbreak corridors in a 30 m/s wind zone. The train's dynamic response was captured using a combined CFD–MBD (Computational Fluid Dynamics and Multi-Body Dynamics) offline time-domain simulation, the accuracy of which was verified experimentally. Results indicate that vortices of various positions and shapes form in the flow field along the windbreak corridor depending on the size of the openings. Using the no-windbreak corridor (Case 1) and the fully enclosed corridor (Case 4) as control groups, it was observed that smaller openings lead to more stable airflow, enhancing peak damping and fluctuation effects, albeit with varying stages of aerodynamic load fluctuation. The 1/3-opening windbreak corridor (Case 3) effectively mitigated the sudden aerodynamic load changes at the wind zone transition of the 2/3-opening windbreak corridor (Case 2), with the primary fluctuation area in Case 3 being the wind section. Dynamic analyses revealed that Case 2 exhibited insufficient lateral aerodynamic performance, raising derailment concerns. In contrast, Case 3 ensured travel safety and comfort effectively, while Case 4 offered excessive protective capacity. This study's findings serve as a valuable reference for designing windbreak corridors and ensuring the safe operation of trains in windy regions.

FLUTTER STUDY ON HIGH SPEED TRAIN EXTERNAL WINDSHIELD BY A TIGHT COUPLING METHOD

Critical Velocity of High-speed Train Running on Soft Soil and Induced Dynamic Soil Response

Vibration characteristics of outer windshield structures of high-speed trains based on fluid–structure interactions

Study on the aerodynamic performance and noise of windshield area in high-speed trains at a frequency of 38 hz

Integrated CFD and MBD methods for dynamic performance analysis of a high-speed train transitioning through varied windbreak corridor designs

Effect of wind speed variation on the dynamics of a high-speed train

Effect of non-fully enclosed windshield on aerodynamic and acoustic behaviors of high-speed train

Aerodynamic Modeling and Stability Analysis of a High-Speed Train under Strong Rain and Crosswind Conditions

An FBG-Based Sensor Tailor-Made for Wind Pressure Monitoring of High-Speed Trains

Transonic Wing Flutter Predictions by a Loosely-Coupled Method

Numerical Study on the Aerodynamic Performance and Safe Running of High-Speed Trains in Sandstorms

Study on aerodynamic characteristics and running safety of two high-speed trains passing each other under crosswinds based on computer simulation technologies

Study on Lateral Vibration of Tail Coach for High-Speed Train under Unsteady Aerodynamic Loads

Testing device for aerodynamic alternating loads on a train cabin

Three dimensional aeroelastic analyses considering free-play nonlinearity using computational fluid dynamics/computational structural dynamics coupling

External excitation effects on the flutter characteristics of a 2-DOF rigid rectangular panel

Dynamics Performance Research and Calculation of Speed Threshold Curve for High-Speed Trains Under Unsteady Wind Loads

Test simulation study on flutter characteristics of airfoil

Numerical Investigation on the Aerodynamics of a Simplified High-Speed Train under Crosswinds

Aerodynamic performance and dynamic response of high-speed trains passing by each other on cable-stayed bridge under crosswind

Mitigating crosswind effect on high-speed trains by active blowing method: a comparative study