Abstract:Abstract The primary objective of this study is to develop a predictive model that accurately estimates the condensation heat transfer coefficient (HTC) in the context of in-tube co-current flow condensation, with specific consideration given to the influence of non-condensable gases (NCGs). The need to find useful models and/or correlations that can accurately predict how well a passive condenser in the Economic Simplified Boiling Water Reactor will transfer heat during condensation is greatly warranted. This innovative cooling system utilizes gravity to condense water vapor, effectively dissipating heat from the containment vessel in the event of an accident and transferring the heat into the secondary cooling system. For the development of the forecasting model, we employed Multi-Gens Genetic Programming implemented in MATLAB. This approach possesses the capability of enabling visualization and articulating a transparent mathematical expression that directly establishes the connection between inputs and outputs. This model was specifically developed for forecasting the HTC during the condensation process, considering two distinct types of NCG: air, helium, and a mixture of air and helium, in addition to data for pure steam. The model was trained using a dataset comprising 2913 data points gathered from five experimental references. The model's input comprises a varied range of parameters, including local location ( $$z$$ z ), temperature of the steam/NCG mixture ( $${T}_{mix}$$ T mix ), condenser wall temperature ( $${T}_{wall}$$ T wall ), coolant flow rate ( $$\beta_{c}$$ β c ), total pressure ( $${P}_{tot}$$ P tot ), condenser inner diameter ( $${D}_{1}$$ D 1 ), condenser outer diameter ( $${D}_{2}$$ D 2 ), molecular weight (MM), NCG mass fraction ( $${w}_{NCG}$$ w NCG ), and mixture Reynolds number ( $${Re}_{mix}$$ Re mix ). The output of our model corresponds to the condensation HTC ( $$h$$ h ). Four specific correlations were examined with the third correlation attaining the highest anticipated values within a deviation range of ± 30, reaching 90.9%, exhibiting good performance in terms of both performance index and coefficient of determination. This correlation was validated, and its accuracy assessed by employing an unused training dataset that included nitrogen as a NCG. The outcomes showed that 92.94% of the predicted data fell within a deviation range of ± 30%. The findings of this study signify a notable advancement in the analysis of datasets obtained from experiments. Particularly, it delves into the impact of NCGs by considering their molecular weight and mass fraction.

A Data‐driven Approach for Flow Corrosion Characteristic Parameters Prediction in an Air Cooler

Ultra-clean Bellows Pump Flowrate Prediction Based on Multi-sensor Information Fusion with Noncontact Magnetic Tagged Bellow Deformation Derivation

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Advanced Machine Learning Techniques for Corrosion Rate Estimation and Prediction in Industrial Cooling Water Pipelines

Prediction of Pressure Evolution in Non-Venting Self-Pressurized Liquid Hydrogen Tanks Using Artificial Neural Network Approach

Prediction of Anoxic Sulfide Biooxidation under Various Hrts Using Artificial Neural Networks

Modeling of Corrosion Rate Under Two Phase Flow in Horizontal Pipe Using Neural Network

Prediction and Quantifying Parameter Importance in Simultaneous Anaerobic Sulfide and Nitrate Removal Process Using Artificial Neural Network

Numerical analysis of heating aerosol carbon nanofluid flow in a power plant recupesrator with considering ash fouling: a deep learning approach

Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant condensation heat transfer inside herringbone-type Brazed Plate Heat Exchangers (BPHE)

Typical Damage Prediction and Reliability Analysis of Superheater Tubes in Power Station Boilers Based on Multisource Data Analysis

Analysis and estimation of cross-flow heat exchanger fouling in phosphoric acid concentration plant using response surface methodology (RSM) and artificial neural network (ANN)

A Robust Predictive Technique for the Pressure Drop During Condensation in Inclined Smooth Tubes

Erosion-corrosion Failure of REAC Pipes under Multiphase Flow

Data-driven physical fields reconstruction of supercritical-pressure flow in regenerative cooling channel using POD-AE reduced-order model

Heat Transfer Prediction for Methane in Regenerative Cooling Channels with Neural Networks

A Two-Phase Methodology to Predict Fac Wear Sites in the Piping System of A Bwr

A Predictive Machine Learning-Based Analysis for In-Tube Co-current Steam Condensation Heat Transfer in the Presence of Non-condensable Gases

A Statistical Model for Accessing Wall Thinning Rate Due to Flow Accelerated Corrosion Based on Inspection Data in Nuclear Power Plants

CORROSION MECHANISM FOR HYDROGENATION SYSTEM EFFLUENT AIR COOLERS

Data-driven approach to predict the flow boiling heat transfer coefficient of liquid hydrogen aviation fuel