Abstract:Jet fuel is used as a coolant before it is burned in the combustor of the aircraft. Insoluble particles and surface deposits can impair engine performance. Jet fuel thermal oxidation test (JFTOT) defines the standard test method for evaluation of the deposit formed through heating fuels in tubes caused by thermal oxidation (<400°C). At a higher temperature, fuel in the heating process decomposes leading to surface deposits by coking. In this work, we propose a method to evaluate the security of fuel flowing in the tube at high temperatures (>500°C). The heat transfer and cracking performances of two hydrocarbon fuels which are laboratory modified aviation kerosene (Fuel 1 (ρ=0.85g/cm3) and Fuel 2 (ρ=0.78g/cm3)) have been investigated in a heat-exchanger under supercritical conditions (T=700–770°C, p=2.5–5.5MPa, m=0.4–1.0g/s). The temperature and flow rate in this work are much higher than those in JFTOT. The safe run time (SRT) is used to evaluate the heat transfer security of each fuel. As the temperature increases or the flow rate decreases or the pressure increases, the SRTs of Fuel 1 and Fuel 2 decrease clearly. In general, the heat transfer security of Fuel 1 is better than that of Fuel 2. Moreover, the volumetric heat sink of Fuel 1 is larger than that of Fuel 2. So, the overall performance of Fuel 1 is more excellent when it is used as propellant and coolant for hypersonic aircraft. In consideration of the heat transfer security, heat sink and the required driving force for aircraft, the temperature of fuel at the exit of heat transfer passage should be set as 740°C, the flow rate of fuel should be 0.6–1.0g/s, the pressure of heat transfer passage should be 3.5MPa. Based on these results, we find that the modification of a high density fuel is an effective way to prepare an advanced hydrocarbon fuel.

A Control Method for Flow Rate Distribution of Cracked Hydrocarbon Fuel in Parallel Channels

Flow rate distribution of cracked hydrocarbon fuel in parallel pipes

The Flow Rate Distribution of Hydrocarbon Fuel in Parallel Channels with Different Cross Section Shapes

Parametric Study on the Hydrocarbon Fuel Flow Rate Distribution and Cooling Effect in Non-Uniformly Heated Parallel Cooling Channels

The influences of variable sectional area design on improving the hydrocarbon fuel flow distribution in parallel channels under supercritical pressure

Numerical analysis of flowing cracked hydrocarbon fuel inside cooling channels in view of thermal management

Flow Resistance Characteristics of Hydrocarbon Fuel at Supercritical Pressure under Various Heat Fluxes in Regenerative Cooling Channel with Micro-Ribs

Effect of Geometry Parameters on the Hydrocarbon Fuel Flow Rate Distribution in Pyrolysis Zone of SCRamjet Cooling Channels

The influences of the header geometry on hydrocarbon fuel flow distribution in compact parallel channels

Thermal management of fuel in advanced aeroengine in view of chemical recuperation

Experimental study on the thermodynamic characteristics of the high temperature hydrocarbon fuel in the cooling channel of the hypersonic vehicle

Parametric Analysis on the Thermal Behavior of Cracking Hydrocarbon Fuel Flow Inside Asymmetry Heated Cooling Channels with Micro-Ribs

Heat Transfer and Cracking Performance of Endothermic Hydrocarbon Fuel when It Cools a High Temperature Channel

Investigation of Hydrocarbon Fuel Rotating Flow Considering the Variation of Physical Properties

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Large Eddy Simulations and Analyses of Hydrocarbon Fuel Heat Transfer in Vertical Upward Flows at Supercritical Pressures

Flow and Heat Transfer of Hydrocarbon Fuel in a Channel with Staggered-Side-Gap Micro Ribs

Thermal management method of fuel in advanced aeroengines

Numerical heat transfer analysis of transcritical hydrocarbon fuel flow in a tube partially filled with porous media

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel