Abstract:Ultrasonic surface wave electromagnetic acoustic transducers (EMATs) have been widely utilized in detecting surface defects of metal materials due to their noncontact advantages. However, the signal energy of surface wave EMAT is weak, mainly influenced by energy conversion efficiency. Increasing the number of excitation signal cycles can enhance the signal energy, but it leads to longer pulsewidth and reduced time-domain resolution. Meanwhile, most of the existing studies excite surface waves with a single frequency, and the frequency information components are limited. To overcome these issues, wideband signal is introduced into the design of surface wave EMAT and combined with pulse compression technique to obtain surface wave signals with wideband, high amplitude, and narrow pulsewidth. In this article, a new wideband pulse compression surface wave EMAT (WPCSW-EMAT) is proposed. WPCSW-EMAT replaces the single frequency signal in conventional EMAT with a linear frequency modulation (LFM) signal. Additionally, the equal meander-line coil is replaced by a variable distance meander-line coil, where the distance between adjacent wires matches the frequency change of the LFM signal. Finite element simulation results demonstrate that compared to conventional EMAT, WPCSW-EMAT can obtain pulse compression surface wave signals with wideband frequency, high amplitude, and narrow pulsewidth. The performance verification experiment and defect detection experiment of EMAT were carried out on aluminum plate samples, and the experimental results indicate that the WPCSW signal excited by WPCSW-EMAT is more suitable for nondestructive testing of metal materials.

Development of Simulation Method for EMAT Signals and Applications to TBC Inspection

Simulation research on electromagnetic tomography

Hybrid Time-Domain Adaptive Integration Method for Simulating Transient Electromagnetic Responses of an Arbitrary Structure with Large Scale

Development of Wideband Pulse Compression Surface Wave EMAT

Simulation of an Electromagnetic Acoustic Transducer Array by Using Analytical Method and FDTD

Development of a new EMAT for multi-helical SH guided waves based on magnetostrictive effect

Research on sector scanning imaging technology of EMAT for through-hole defects in aluminium plates

DEVELOPMENT OF RESEARCH ON ELECTROMAGNETIC ACOUSTIC TRANSDUCER FOR NONDESTRUCTIVE TESTING

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Imaging of subsurface defects with surface wave SAFT based on an array pickup EMAT

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

Numerical Modelling of Unilateral Point-Focusing Electromagnetic Acoustic Transducer with Experimental Validation

Unidirectional focusing Rayleigh waves EMAT for plate surface defect Inspection

Numerical simulation methods for motion-induced eddy current testing signals based on Ar formulation and edge finite elements

Defect Detection and Identification of Point-Focusing Shear-Horizontal EMAT for Plate Inspection

A New Omni-Directional Emat For Ultrasonic Lamb Wave Tomography Imaging Of Metallic Plate Defects

Focusing Dimension Optimization of Shear Vertical Wave EMATs Using Orthogonal Test Method

Internal and External Pipe Defect Characterization via High-Frequency Lamb Waves Generated by Unidirectional EMAT

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

Modeling and Finite Element Analysis of Transduction Process of Electromagnetic Acoustic Transducers for Nonferromagnetic Metal Material Testing

Three-Dimensional Simulation of Electron-Acoustic Detections