Abstract:An Auto-focusing and Auto-alignment system based on digital image processing and the computer control technology was developed for 3-LCD projector manufacture. We analyzed the imaging characteristic of the optical system, and developed a mathematical model to realize the accurate focusing of each LCD panel and accurate alignment among three LCD panels. Based on the model, the experimental facility was set up, which is compose of five CCD detectors that are placed on the screen at different filed of view to capture images and regulating mechanism of LCD's six-dimensional degree of freedom droved by stepper motors. Appropriate defocusing evaluation function and alignment algorithm were also presented in this paper. The images captured by CCDs are processed to get the defocusing amount of every panel by the variance function and displacement amount of the three LCD panels by the gravity model approach. Then commands are sent to regulating mechanism to control the movement of each panel. After several turns of auto-correction, all the panels are in the proper position. Experiment results show that with the proper algorithm, the system can provide high accuracy and good performance in projector manufacture. The whole focusing and alignment process can be finished within ten minutes which is far superior to that made by man more than half an hour. With this system, completely automatic product lines can be established, which can provide 3-panel LCD projector light engines with considerable focusing and alignment accuracy.

Calibration of Fabrication Error for Autostereoscopic Threedimensional Display

Effects of Mechanical Error of Screen on Volumetric Three-Dimensional Display

Reduction In The Reconstruction Error Of Computer-Generated Holograms In Liquid Crystal Panels

Gamma correction on volumetric 3D display system

Auto-focusing and Auto-Alignment System for Three-Panel LCD Projection Display

Accurate 3D Autostereoscopic Display Using Optimized Parameters Through Quantitative Calibration.

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Automatic Geometrical Calibration for Multiprojector-Type Light Field Three-Dimensional Display

Self‐calibration Three‐dimensional Light Field Display Based on Scalable Multi‐lcds

A Practical Method to Measure Parameters of Lenticular-Lens Sheet for 3DLCD

3D Quantitative Evaluation System for Autostereoscopic Display

Precision On—line Stitching Method of Holographic Lens Panel Used in Autostereoscopic 3D LED Display

Stereo Image Rectification Algorithm for Multi-View 3D Display

3D Synthesis and Crosstalk Reduction for Lenticular Autostereoscopic Displays

P‐4: Measurement and Analysis of a Novel Full‐Parallax Three Dimensional Display System

Hybrid Camera Array Based Calibration for Computer-Generated Integral Photography Display.

Multi-projector Display Based on Pre-correction of the Camera

Calibrating Laser Three-Dimensional Projection Systems Using Binocular Vision

Liquid-crystal-display-based touchable light field three-dimensional display using display-capture mapping calibration.

GPU-Based Geometric and Photometric Corrections for Multi-projector Autostereoscopic Display

Multi-View Images Rectification Based on Common Points Extraction