The Pore Characterization of the Lower Silurian Longmaxi Shale in the Southeast Chongqing, China Using Fe-Sem, Ltna and Mip Methods

Chen Fangwen,Ding Xue,Lu Shuangfang,Ju Yiwen

DOI: https://doi.org/10.1166/jnn.2017.14406

2017-01-01

Journal of Nanoscience and Nanotechnology

Abstract:To compare experimental methods for evaluating shale pore structure, a series of parallel experiments were conducted on Lower Silurian Longmaxi Shale from the Southeast Chongqing, China, including field emission scanning electron microscopy (FE-SEM), low temperature nitrogen adsorption/desorption (LTNA) and mercury intrusion porosimetry (MIP) techniques. The results show that the organic pores were undertook compaction after forming from hydrocarbon generation. The diameters of organic pores are mainly distributed from 10 to 50 nm. Many organic pores are partly overlapped or crossed, which indicates that these organic pores are interconnected in the organic matter grains. More than 80% of the pore volumes measured by LTNA are contributed by pores smaller than 20 nm. The interconnected pore volumes measured by MIP are dominated by pores larger than 1000 nm, and the volumes of pores smaller than 1000 nm are slowly increasing with the decreasing of pore widths. Pore volumes of different pore size ranges in shale sample can be better evaluated by combining the results of the three methods. The comprehensive analysis of LTNA and MIP can be used to quantitatively evaluate pore size distribution and volumes of nanometerscale organic, inorganic pores and nanometer-to micrometer-scale pores. The results from LTNA are adopted preferentially in the pore size range smaller than 200 nm, while the results from MIP are accurate in the pore size range bigger than 200 nm. The pore volumes of organic in the pore size range of 10-200 nm can be measured by FE-SEM, and the pore volumes of inorganic pores in corresponding pore size range can be obtained by the comprehensive values of LTNA and MIP minus the results of FE-SEM.