Abstract:The effect of heat treatments on bulk poly-crystalline La 0.67 Ca 0.33 MnO 3 perovskite manganite is presented, to explore the possible enhancement in magnetocaloric performance. Samples were prepared via conventional solid-state reaction route with annealing and sintering at various temperatures. Detailed measurements of temperature-dependent and field-dependent magnetization were carried out to estimate the Curie point and order of magnetic transition. The increased sintering temperature results in a steep transition near the T C , and establishes the magnetic sensitivity as well as the active zone for substantial magnetocaloric performance, at about 168.2% for the LCM9 (sintered at 900 °C) sample. The cause for the significant improvement in the magnetic and magnetocaloric response is brought to light using detailed X-ray photoelectron spectroscopy (XPS) analysis, highlighting the role of oxygen in modifying the Mn 3+ /Mn 4+ charge ratio. The maximum value of the isothermal magnetic entropy change for the optimized sample is found to be 6.4 J kg −1 K −1 , achieved at 269 K, while temperature-averaged entropy change (TEC) values, TEC(Δ T H–C = 3 K) and TEC(Δ T H–C = 5 K), of 6 J kg −1 K −1 and 5.2 J kg −1 K −1 , respectively, were obtained with a low magnetic field change of 20 kOe. The obtained isothermal entropy change at low field for the optimized La 0.67 Ca 0.33 MnO 3 sample is higher than that of pure Gd and most oxide-based materials. The relative cooling power (RCP) value is around 93 J kg −1 (Δ H = 20 kOe). The order of the phase transition is examined with universal scaling; the scaled entropy change curves confirm the collapse onto a single curve for LCM9, asserting second-order character, whereas the breakdown of the curve with a dispersion relation ( d ) of 101.1% at Θ = −5 confirms the onset of intrinsic first-order nature in the case of the high-temperature-sintered samples. Calorimetry measurements show thermal hysteresis of 2.4 K and 7.1 K for LCM11 (sintered at 1100 °C) at ramp rates of 5 K min −1 and 10 K min −1 , respectively, confirming the first-order nature of the magnetic transition.

Multiple Magnetic Phase Transition and Short-Range Ferromagnetic Behavior Influence on Magnetocaloric Effect of Sm2NiMnO6 Nanoparticles

Large Magnetocaloric Effect in Single Crystal Pr0.63Sr0.37MnO3

Large Magnetocaloric effect and magnetic phase transitions in Nd$_2$NiMnO$_6$

Magnetic and magnetocaloric properties of the multi-component Mn0.5Fe0.5Ni0.95Cr0.05Si0.95Al0.05 intermetallic compound

Particle Size Effect on Charge Ordering and Magnetocaloric Effect in Nanosized Nd0.5Sr0.5MnO3

Structure, Electronic, Optical, Magnetic and Magnetocaloric Properties of Sm2CuMnO6 Double Perovskite Nanomaterial

Existence of inter coupled structural, electronic and magnetic states in Sm$ _{2} $NiMnO$ _{6} $ double perovskite

Multiple magnetic phase transitions and magnetocaloric effects of perovskite manganite

Metamagnetic phase transition induced large magnetocaloric effect in a Dy0.5Ho0.5MnO3 single crystal

Spin-dependent magnetism and superparamagnetic contribution to the magnetocaloric effect of non-stoichiometric manganite nanoparticles

Theoretical Insights into the Stability of Perovskite Clusters by Studying Magnetization and Magnetocaloric Effect of Nd0.6Sr0.4MnO3 Compound at Room Temperature

Magnetic and Magnetocaloric Properties of Nanocrystalline La 0.5 Sr 0.5 MnO 3

Magnetocaloric Analysis of Novel Polycrystalline Sm0.5Sr0.4Nd0.1Mn1‐xTixO3(0 ≤ x ≤ 0.2) that Correlates Structural and Magnetic Properties

Large Magnetocaloric and Magnetoresistance Effects in Metamagnetic Sm-0.55(Sr0.5ca0.5)(0.45)Mno3 Manganite

Influence of heat sintering on the physical properties of bulk La 0.67 Ca 0.33 MnO 3 perovskite manganite: role of oxygen in tuning the magnetocaloric response

Enlarging the magnetocaloric operating window of the Dy2NiMnO6 double perovskite

Magnetic structure analysis of the L2 1 -type austenite in Ni–Mn–In alloys

Structural, Dielectric, Magnetic and Optical Properties of Double Perovskite Oxide Sm2NiMnO6 Nanoparticles Synthesized by a Sol−gel Process

Enhanced Magnetocaloric Effect Driven by Interfacial Magnetic Coupling in Self-Assembled Mn3o4-La0.7sr0.3mno3 Nanocomposites

Effect of temperature and magnetic field induced hysteresis on reversibility of magnetocaloric effect and its minimization by optimizing the geometrical compatibility condition in Mn–Ni–Fe–Si alloy

A study on the structural, optical, magnetization reversal and bipolar magnetic switching behavior of SmCr0.85Mn0.15O3 nanoparticles