Abstract:The status of current advances in modifying surfaces for the protection of materials is reviewed in this research. The main goal of material selection is to improve and reinforce surface functionalities. A few examples of surface modification techniques include sol-gel, cladding, electroplating, plasma and thermal spraying, physical deposition of vapors (PVD), vapor chemical deposition (CVD) and beam electron physical vapor deposition (EB-PVD). Strengthening by flame, induction, laser or electron beam is one type of surface modification procedure. Other types include plasma-immersed ion implantation and ion implantation at high energies, as well as diffusion treatments like carburizing and nitriding. Friction control, improved surface corrosion and wear resistance and changes to a component's mechanical or physical qualities are all possible using surface modification methods. The study also contains contemporary research in laser therapy, PVD, EB-PVD, thermal spraying and ion implantation. Additionally, magnetron sputtering (MS) is a widely used and successful approach for thin film coating in the current study. It is crucial to remember that each approach has a distinct set of restrictions, and the method's parameters might change based on the one that is selected, such as deposition targets, overall vacuum substrate temperature, reactive or mixed gas type, pressure percentage and bias voltage, which all have impacts on the PVD technique's layer qualities. Phase formation, change in phase, hardness and film structure of monolayer and multilayer films formed on the substrate under various circumstances also cause variations in the characteristics. Additionally, ion implantation enhances the surface characteristics of layers by implanting ions such as N + , B + , C + , etc. The study shows that the higher layers of multilayer enhance the degree of hardness and lower friction coefficients. To enhance the protection of thermal resistance, a thermal spraying barrier coating was coated on substrate nickel-base alloys, and the surface materials' texture, hardness and wear rate were altered by laser beam. Additionally, a heat pipe's performance was improved by a factor of 300 by adding a tiny coating of gold.

Recent Developments in Research of Double Glow Plasma Surface Alloying Technology: a Brief Review

A modern-day alchemy: Double glow plasma surface metallurgy technology

Characterisation and Oxidation Behaviour of Plasma Surface Alloyed on Γ-Tial Alloy

Surface modification of biomedical metals by double glow plasma surface alloying technology: A review of recent advances

Ni-based Superalloy Surface Alloying by Double-Glow Plasma Surface Alloying Technique

A Series of Plasma Innovation Technologies by Double Glow Discharge Phenomenon

Manipulation Tribological Behavior of Ti6Al4V Alloy Via a Duplex Treatment of Double Glow Plasma Surface Molybdenizing-Laser Surface Texturing (LST)

Multiple Needle Cathodes Plasma Surface Alloying of Ti6Al4V with W-Mo-C-N

Investigation on Multi-Element Ni–Cr–Mo–Cu Alloying Layer by Double Glow Plasma Alloying Technique

Effect of energy distribution on the machining efficiency and surface morphology of Inconel 718 nickel-based superalloy using plasma electrolytic polishing

Review of effective techniques for surface engineering material modification for a variety of applications

Recent trends in laser cladding and surface alloying

Status and Development of Surface Alloying by Electron Beam

Plasma Electrolytic Oxidation (PEO) as a Promising Technology for the Development of High-Performance Coatings on Cast Al-Si Alloys: A Review

A review of recent advances in integrated laser remelting and laser cladding processes

Combining laser surface texturing and double glow plasma surface chromizing to improve tribological performance of Ti6Al4V alloy

Application of electrochemical polishing in surface treatment of additively manufactured structures: A review

Optimization of electrolytic plasma polishing process and surface performance analysis for 6061 aluminum alloy

Review—Electropolishing of Additive Manufactured Metal Parts

Diffusion and surface alloying of gradient nanostructured metals

Recent research and development status of laser cladding: A review