Ensemble-machine-learning-based Correlation Analysis of Internal and Band Characteristics of Thermoelectric Materials

Lihao Chen,Ben Xu,Jia Chen,Ke Bi,Changjiao Li,Shengyu Lu,Guosheng Hu,Yuanhua Lin

DOI: https://doi.org/10.1039/d0tc02855j

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:Machine learning can significantly help to predict the thermoelectric properties of materials, such as the Seebeck coefficient and electrical conductivity.

What problem does this paper attempt to address?

Predicting the Effective Thermal Conductivities of Composite Materials and Porous Media by Machine Learning Methods

Han Wei,Shuaishuai Zhao,Qingyuan Rong,Hua Bao

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.082

IF: 5.2

2018-01-01

International Journal of Heat and Mass Transfer

Abstract:Composite materials have a wide range of engineering applications, and their effective thermal conductivities are important thermo-physical properties for real applications. The traditional methods to study effective thermal conductivities of composite materials, such as the effective medium theory, the direct solution of heat diffusion equation, or the Boltzmann transport equation, are all based on developing good physical understanding of heat transfer mechanisms in those composite materials. In this work, we take a completely different approach to predict the effective thermal conductivities of composite materials using machine learning methods. With a set of trustable data, the support vector regression (SVR), Gaussian process regression (GPR) and convolution neural network (CNN) are employed to train models that can predict the effective thermal conductivities of composite materials. We find that the models obtained from SVR, GPR, and CNN all have a better performance than the Maxwell-Eucken model and the Bruggeman model in terms of predicting accuracy. Our work demonstrates that machine learning methods are useful tools to fast predict the effective thermal conductivities of composite materials and porous media if the training data set is available. The machine learning approach also has the potential to be generalized and applied to study other physical properties of composite materials. (C) 2018 Elsevier Ltd. All rights reserved.
Machine learning in thermoelectric materials identification: Feature selection and analysis

Yijing Xu,Lu Jiang,Xiang Qi

DOI: https://doi.org/10.1016/j.commatsci.2021.110625

IF: 3.572

2021-09-01

Computational Materials Science

Abstract:<p>Traditional experimental methods and calculation methods have troublesome steps and long cycles for predicting new thermoelectric materials. Here, a machine learning method used to identify the thermoelectric materials with high efficiency and accuracy is introduced. Furthermore, the relationship between features and thermoelectric performance is discovered by model decomposition and feature combination analysis. The data is extracted from the MRL database to generate a dataset. Then the feature selection is based on the information entropy evaluation of the ExtraTree-based model to exclude dependent and redundant features and obtained the minimum complexity model of 4 features. According to the data set, five different machine learning models are trained and tested, it is found that the Random Forest model is the best choice. The model decomposition and feature combination analysis are attempted to discover the relationship between features and thermoelectric performance. Finally, we use the 4 features that have the most contribution to the thermoelectric performance to reduce a search space of more than 130,000 systems to a set of 6476 candidates. Among the 10 most promising candidates identified, 4 are the existing thermoelectric materials and 6 are ideal candidate materials for future experimental investigation and validation, thus providing important information for the further examination of thermoelectric materials. The approach used in this work is not limited to the search of thermoelectric materials and can be applied in searching for other functional materials.</p>

materials science, multidisciplinary
Machine Learning Based Feature Engineering for Thermoelectric Materials by Design

U. S. Vaitesswar,Daniil Bash,Tan Huang,Jose Recatala-Gomez,Tianqi Deng,Shuo-Wang Yang,Xiaonan Wang,Kedar Hippalgaonkar

DOI: https://doi.org/10.1039/d3dd00131h

2024-01-01

Digital Discovery

Abstract:We train several machine learning models on a dataset comprised by Materials Project and calculated thermoelectric power factor. We show that a random forest model outperforms more complex approaches for the dataset and allows for interpretability.
Thermoelectric Prediction from Material Descriptors Using Machine Learning Technique

Pakawat Sungphueng,Kittiphong Amnuyswat

DOI: https://doi.org/10.55003/cast.2023.06.23.014

2023-04-19

Current Applied Science and Technology

Abstract:In this work, we employed a machine learning framework to predict the thermoelectric power factors of materials based on their composition and structure. To generate a broad range of materials for analysis, we sourced an existing dataset from the Materials Project database. The electronic transport properties, which serve as the output variables, were obtained from the same database via a Boltzmann transport theory calculation beyond ab-initio method. These properties were used to generate input data, or material descriptors, which rely solely on atomic information and crystal structure without recourse to density functional theory calculations. The descriptors were transformed into numerical features using the open-source software Matminer. Non-linear machine learning regression models were trained and tested on the transformed datasets, and their performance was evaluated. The optimized random forest model produced the most accurate predictions, with a yield of 88%. The ultimate goals of this research were to develop material selection strategies that bypass the need for self-consumption in density functional theory calculations, and to demonstrate the potential of machine learning models to describe the thermoelectric properties of existing materials datasets.

English Else
Machine Learning Approaches for Thermoelectric Materials Research

Tian Wang,Cheng Zhang,Hichem Snoussi,Gang Zhang

DOI: https://doi.org/10.1002/adfm.201906041

IF: 19

2019-01-01

Advanced Functional Materials

Abstract:Thermoelectric (TE) materials provide a solid‐state solution in waste heat recovery and refrigeration. During the past few decades, considerable effort has been devoted towards improving the performance of TE materials, which requires the optimization of multiple interrelated properties. A fundamental understanding of the interaction processes between the various energy carriers, such as electrons and phonons, is critical for advances in the development of TE materials. However, this understanding remains challenging primarily due to the inaccessibility of time scales using standard atomistic simulations. Machine learning methods, well known for their data‐analysis capability, have been successfully applied in research on TE materials in recent years. Here, an overview of the machine learning methods used in thermoelectric studies is provided, with the role that each machine learning method plays being systematically discussed. Furthermore, to date, the scale of thermoelectric‐related databases is much smaller than those in other fields, such as e‐commerce, image identification, and speech recognition. To overcome this limitation, possible strategies to utilize small databases in promoting materials science are also discussed. Finally, a brief conclusion and outlook are presented.
Machine Learning for Predicting Ultralow Thermal Conductivity and High ZT in Complex Thermoelectric Materials

Yuzhou Hao,Yuting Zuo,Jiongzhi Zheng,Wenjie Hou,Hong Gu,Xiaoying Wang,Xuejie Li,Jun Sun,Xiangdong Ding,Zhibin Gao

DOI: https://doi.org/10.1021/acsami.4c09043

IF: 9.5

2024-09-03

ACS Applied Materials & Interfaces

Abstract:Efficient and precise calculations of thermal transport properties and figures of merit, alongside a deep comprehension of thermal transport mechanisms, are essential for the practical utilization of advanced thermoelectric materials. In this study, we explore the microscopic processes governing thermal transport in the distinguished crystalline material Tl(9)SbTe(6) by integrating a unified thermal transport theory with machine learning-assisted self-consistent phonon calculations. Leveraging...

materials science, multidisciplinary,nanoscience & nanotechnology
Assessing thermoelectric performance of quasi 0D carbon and polyaniline nanocomposites using machine learning

Sergio Arroyo Armida,Dariush Ebrahimibagha,Mallar Ray,Shubhabrata Datta,Sergio Arroyo ArmidaDariush EbrahimibaghaMallar RayShubhabrata Dattaa School of Engineering and Sciences,Tecnológico de Monterrey 64849,Monterrey,Nuevo Leon,Mexicob Department of Mechanical Engineering,SRM Institute of Science and Technology,Kattankulathur,603203,Chennai,India

DOI: https://doi.org/10.1080/09243046.2023.2262875

IF: 2.92

2023-10-05

Advanced Composite Materials

Abstract:Thermoelectric materials have been widely recognized as a simple approach to harness green energy by converting thermal gradients into electrical energy. However, the intricate interplay between electrical conductivity, Seebeck coefficient, and thermal conductivity in thermoelectric materials presents a challenge to improving their efficiency. Traditional experimental methods and calculation methods have troublesome steps and long cycles for predicting new thermoelectric materials. In this work we present materials informatics-based approach, where statistical and machine learning models like correlation matrix, multiple linear regression, principal component analysis and artificial neural network were employed to find the relationship between features and thermoelectric performance. Furthermore, artificial neural network was used to analyze the roles of several compositional and microstructural features along with temperature on electrical conductivity, thermal conductivity, Seebeck coefficient and thermoelectric figure of merit (ZT) for PANI and quasi 0D carbon-based composites.

materials science, composites
Influence of Molecular Layered Structure on Thermoelectric Properties of Materials

Lihao Chen,Shuopu Wang,Chen Zou,Jianchun Xu,Ben Xu,Ke Bi

DOI: https://doi.org/10.2139/ssrn.4065697

2022-01-01

SSRN Electronic Journal

Abstract:The molecular structure characteristics of thermoelectric materials are important attributes that affect thermoelectric performance. Under the conventional standard, the molecular structure of thermoelectric materials includes a variety of spatial layering methods based on the positive and negative charges in the layer, electronegativity, and layer distance. According to the results of different structure stratification, we used machine learning methods to explore the relationship between molecular structure stratification and the thermoelectric properties of materials from the perspectives of element composition, atomic information, electron orbits, and energy distribution. Through the ensemble machine learning method to predict the Seebeck coefficient, conductivity, and power factor of thermoelectric materials, the feature selection and feature extraction of material stratification information can be carried out. Combined with the different eigenvector groups corresponding to the delamination results, we deeply excavate the relationship between the material delamination structure information and the thermoelectric properties and demonstrate the importance of the material delamination information on the thermoelectric properties from multiple aspects.
Feature Mining for Thermoelectric Materials based on Interpretable Machine Learning

Yiyu Liu,Zilong Mu,Peichao Hong,Yun Yang,Changxu Lin

DOI: https://doi.org/10.1039/d4nr03271c

IF: 6.7

2024-11-29

Nanoscale

Abstract:In previous laboratory preparation processes, the selection and proportioning of specific experimental parameters often stemmed from the empirical experience of predecessors, necessitating the derivation of the optimal scheme for the target experiment through extensive trial and error. This process typically required the consumption of substantial resources and time. Thanks to the advancement of machine learning technologies, these have gradually become a powerful tool for addressing complex functional problems in material optimization. This study is based on a collected database of thermoelectric materials, aiming to clarify the correspondence between physical characteristics and the thermoelectric figure of merit, zT. The key features that can directly affect the experimental results are identified, and the features that indirectly affect the experimental results are also analyzed. Employing interpretable machine learning methods, this research analyzes critical molecular features in the characterized data, utilizing feature engineering techniques to construct and optimize machine learning models for the selected key features. Furthermore, in the subsequent model fitting and analysis phase, by comparing the efficiency of different feature combinations, the optimal feature descriptors for the current experimental system were determined. The adoption of the aforementioned improved methods endowed the related models with the potential for high-throughput screening, thereby further enhancing the efficiency of experimental optimization.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Combining Machine Learning Models with First-Principles High-Throughput Calculation to Accelerate the Search of Promising Thermoelectric Materials

Tao Fan,Artem R. Oganov

2024-05-04

Abstract:Thermoelectric materials can achieve direct energy conversion between electricity and heat, thus can be applied to waste heat harvesting and solid-state cooling. The discovery of new thermoelectric materials is mainly based on experiments and first-principles calculations. However, these methods are usually expensive and time-consuming. Recently, the prediction of properties via machine learning has emerged as a popular method in materials science. Herein, we firstly did first-principles high-throughput calculations for a large number of chalcogenides and built a thermoelectric database containing 796 compounds. Many novel and promising thermoelectric materials were discovered. Then, we trained four ensemble learning models and two deep learning models to distinguish the promising thermoelectric materials from the others for n type and p type doping, respectively. All the presented models achieve classification accuracy higher than 85% and area under the curve (AUC) higher than 0.9. Especially, the M3GNet model for n type data achieve accuracy, precision and recall all higher than 90%. Our works demonstrate a very efficient way of combining machine learning prediction and first-principles high-throughput calculations together to accelerate the discovery of advanced thermoelectric materials.

Materials Science
A Critical Review of Machine Learning Techniques on Thermoelectric Materials

Xiangdong Wang,Ye Sheng,Jinyan Ning,Jinyang Xi,Lili Xi,Di Qiu,Jiong Yang,Xuezhi Ke

DOI: https://doi.org/10.1021/acs.jpclett.2c03073

2023-02-11

Abstract:Thermoelectric (TE) materials can directly convert heat to electricity and vice versa and have broad application potential for solid-state power generation and refrigeration. Over the past few decades, efforts have been made to develop new TE materials with high performance. However, traditional experiments and simulations are expensive and time-consuming, limiting the development of new materials. Machine learning (ML) has been increasingly applied to study TE materials in recent years. This...

chemistry, physical,physics, atomic, molecular & chemical,nanoscience & nanotechnology,materials science, multidisciplinary
Prediction of lattice thermal conductivity with two-stage interpretable machine learning

Jinlong Hu,Yuting Zuo,Yuzhou Hao,Guoyu Shu,Yang Wang,Minxuan Feng,Xuejie Li,Xiaoying Wang,Jun Sun,Xiangdong Ding,Zhibin Gao,Guimei Zhu,Baowen Li

DOI: https://doi.org/10.1088/1674-1056/acbaf4

2023-03-01

Chinese Physics B

Abstract:Thermoelectric and thermal materials are essential in achieving carbon neutrality. However, the high cost of lattice thermal conductivity calculations and the limited applicability of classical physical models have led to the inefficient development of thermoelectric materials. In this study, we proposed a two-stage machine learning framework with physical interpretability incorporating domain knowledge to calculate high/low thermal conductivity rapidly. Specifically, crystal graph convolutional neural network (CGCNN) is constructed to predict the fundamental physical parameters related to lattice thermal conductivity. Based on the above physical parameters, an interpretable machine learning model–sure independence screening and sparsifying operator (SISSO), is trained to predict the lattice thermal conductivity. We have predicted the lattice thermal conductivity of all available materials in the open quantum materials database (OQMD) ( https://www.oqmd.org/ ). The proposed approach guides the next step of searching for materials with ultra-high or ultra-low lattice thermal conductivity and promotes the development of new thermal insulation materials and thermoelectric materials.

physics, multidisciplinary
A multi-objective, multi-interpretable machine learning demonstration verified by domain knowledge for ductile thermoelectric materials

Xiangdong Wang,Yan Cao,Jialin Ji,Ye Sheng,Jiong Yang,Xuezhi Ke

DOI: https://doi.org/10.1016/j.jmat.2024.04.011

IF: 8.589

2024-05-30

Journal of Materiomics

Abstract:Highlights • Two features were found to simultaneously optimize ductility and zT based on two interpretable machine learning models. • Correlations between key features and target values were obtained through interpretable machine learning models. • Above correlations were verified through domain knowledge of thermoelectric materials. Multi-objective machine learning (ML) methods are widely used in the field of materials because material optimizations are always multi-objective. Traditional multi-objective optimization methods mainly use a combination of hierarchical single-objective optimization. However, this strategy often has difficulty in finding features that can optimize multiple objectives simultaneously. In this work, taking the two objectives of ductility and thermoelectric performance as examples, interpretable and explainable ML strategies are used to find features that can simultaneously optimize multiple objectives. Specifically, SHAP and SISSO are applied for qualitative analysis and quantitative analysis between key features and target values. Both SISSO and SHAP show that EN(ab) A/B and V are both positively correlated with zT and negatively correlated with Pugh's ratio. Furthermore, domain knowledge helps to rationalize the two favorable features. The compounds with large EN(ab) A/B tend to have high band degeneracies, resulting in high zT . High EN(ab) A/B correspond to weak B–X bonds, reducing the G and Pugh's ratio, and improving the ductility of materials. On the other hand, large V will cause small G , which is beneficial to small Pugh's ratio and large zT ( via low κ L ). The present work demonstrates the significance of multi-objective optimization and domain knowledge in the development of materials informatics. Graphical abstract Download : Download high-res image (200KB) Download : Download full-size image

materials science, multidisciplinary,physics, applied,chemistry, physical
Predicting interfacial thermal resistance by machine learning

Yen-Ju Wu,Lei Fang,Yibin Xu

DOI: https://doi.org/10.1038/s41524-019-0193-0

IF: 12.256

2019-05-03

npj Computational Materials

Abstract:Abstract Various factors affect the interfacial thermal resistance (ITR) between two materials, making ITR prediction a high-dimensional mathematical problem. Machine learning is a cost-effective method to address this. Here, we report ITR predictive models based on experimental data. The physical, chemical, and material properties of ITR are categorized into three sets of descriptors, and three algorithms are used for the models. Those descriptors assist the models in reducing the mismatch between predicted and experimental values and reaching high predictive performance of 96%. Over 80,000 material systems composed of 293 materials were inputs for predictions. Among the top-100 high-ITR predictions by the three different algorithms, 25 material systems are repeatedly predicted by at least two algorithms. One of the 25 material systems, Bi/Si achieved the ultra-low thermal conductivity in our previous work. We believe that the predicted high-ITR material systems are potential candidates for thermoelectric applications. This study proposed a strategy for material exploration for thermal management by means of machine learning.

materials science, multidisciplinary,chemistry, physical
Knowledge extraction and performance improvement of Bi2Te3-based thermoelectric materials by machine learning

Zhi-Lei Wang,Toshiyuki Funada,Tetsuhiko Onda,Zhong-Chun Chen

DOI: https://doi.org/10.1016/j.mtphys.2023.100971

IF: 11.021

2023-02-01

Materials Today Physics

Abstract:Major advances in materials research often require serendipity and chemical intuition. Traditional trial-and-error-based experimental studies are becoming insufficient for designing novel high-performance materials because of staggering degree of freedom in materials' processing and composition. This work employed machine learning to aid the design of hot-extruded Bi2Te2.85Se0.15 bulk thermoelectric materials based on a small amount of in-house experimental data. Surprisingly, it was found that a combination of processing/composition design strategy with higher extrusion temperatures, more Cu dopants, and deficiency of Te, which is contradictory to experimental experiences, could enhance the materials’ figure of merit (ZT). Experimental validation demonstrated that such a processing/composition solution effectively suppressed formation of point defects, refined microstructure, and promoted evolution of a “fiber texture”, thus simultaneously improving thermoelectric and mechanical properties. The data-driven strategy breaks the rules of thumb in traditional experimental studies and extracts new knowledge to guide the design of high-performance Bi2Te3-based bulk thermoelectric materials.

materials science, multidisciplinary,physics, applied
Prediction of thermoelectric-figure-of-merit based on autoencoder and light gradient boosting machine

Yingying Xu,Xinyi Liu,Jifen Wang

DOI: https://doi.org/10.1063/5.0183545

IF: 2.877

2024-02-15

Journal of Applied Physics

Abstract:The evaluation of thermoelectric materials relies significantly on the thermoelectric figure of merit, ZT, which serves as a crucial parameter in assessing their properties. The accurate prediction of ZT values can be accomplished by utilizing machine learning models to learn material characteristics. However, factors such as the size of the dataset, model hyperparameters, and data quality can all impact the accuracy of machine learning. In contrast to previous research where high-dimensional features were simply discarded to transform them into low-dimensional ones, deep learning models such as autoencoder can extract more effective information. Therefore, in this article, the combination of autoencoders and the Light Gradient Boosting Machine (LightGBM) is employed to learn the chemical characteristics and ZT values of various materials. The reliability of the model was confirmed by achieving an R2 score of 0.94 during tenfold cross-validation. 130 000 materials were predicted and screened, the temperature dependence of the screened materials was studied in depth, and 13 materials with high ZT values were identified. Four of the 13 most promising candidates identified are existing thermoelectric materials, while nine are ideal candidates for future experimental studies and validation. This work utilizes autoencoders for extensive prediction and screening of promising materials, providing an effective approach for handling high-dimensional material data.

physics, applied
Predicting lattice thermal conductivity from fundamental material properties using machine learning techniques

Guangzhao Qin,yi Wei,Linfeng Yu,jinyuan Xu,Joshua Ojih,Alejandro David Rodriguez,Huiming Wang,Zhenzhen Qin,Ming Hu

DOI: https://doi.org/10.1039/d2ta08721a

IF: 11.9

2023-02-25

Journal of Materials Chemistry A

Abstract:High-throughput screening and material informatics have shown a great power in the discovery of novel materials, including batteries, high entropy alloys, and photocatalysts. However, the lattice thermal conductivity ( κ ) oriented high-throughput screening of advanced thermal materials is still limited to the intensive use of first principles calculations, which is inapplicable to fast, robust, and large-scale material screening due to the unbearable computational cost demanding. In this study, 15 machine learning algorithms are utilized for fast and accurate κ prediction from basic physical and chemical properties of materials. The well-trained models successfully capture the inherent correlation between these fundamental material properties and κ for different types of materials. Moreover, deep learning combined with a semi-supervised technique shows the capability of accurately predicting diverse κ values spanning 4 orders of magnitude, especially the power of extrapolative prediction on 3716 new materials. The developed models provide a powerful tool for large-scale advanced thermal functional materials screening with targeted thermal transport properties.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Predicting Thermoelectric Transport Properties from Composition with Attention-based Deep Learning

Luis M. Antunes,Keith T. Butler,Ricardo Grau-Crespo

DOI: https://doi.org/10.48550/arXiv.2212.06444

2022-12-13

Abstract:Thermoelectric materials can be used to construct devices which recycle waste heat into electricity. However, the best known thermoelectrics are based on rare, expensive or even toxic elements, which limits their widespread adoption. To enable deployment on global scales, new classes of effective thermoelectrics are thus required. $\textit{Ab initio}$ models of transport properties can help in the design of new thermoelectrics, but they are still too computationally expensive to be solely relied upon for high-throughput screening in the vast chemical space of all possible candidates. Here, we use models constructed with modern machine learning techniques to scan very large areas of inorganic materials space for novel thermoelectrics, using composition as an input. We employ an attention-based deep learning model, trained on data derived from $\textit{ab initio}$ calculations, to predict a material's Seebeck coefficient, electrical conductivity, and power factor over a range of temperatures and $\textit{n}$- or $\textit{p}$-type doping levels, with surprisingly good performance given the simplicity of the input, and with significantly lower computational cost. The results of applying the model to a space of known and hypothetical binary and ternary selenides reveal several materials that may represent promising thermoelectrics. Our study establishes a protocol for composition-based prediction of thermoelectric behaviour that can be easily enhanced as more accurate theoretical or experimental databases become available.

Materials Science
Machine learning assisted discovering of new M2X3-type thermoelectric materials

Du Chen,Feng Jiang,Liang Fang,Yong-Bin Zhu,Cai-Chao Ye,Wei-Shu Liu

DOI: https://doi.org/10.1007/s12598-021-01911-0

IF: 6.318

2022-02-22

Rare Metals

Abstract:Recent years have witnessed a continuous discovering of new thermoelectric materials which has experienced a paradigm shift from try-and-error efforts to experience-based discovering and first-principles calculation. However, both the experiment and first-principles calculation deriving routes to determine a new compound are time and resources consuming. Here, we demonstrated a machine learning approach to discover new M2X3-type thermoelectric materials with only the composition information. According to the classic Bi2Te3 material, we constructed an M2X3-type thermoelectric material library with 720 compounds by using isoelectronic substitution, in which only 101 compounds have crystalline structure information in the Inorganic Crystal Structure Database (ICSD) and Materials Project (MP) database. A model based on the random forest (RF) algorithm plus Bayesian optimization was used to explore the underlying principles to determine the crystal structures from the known compounds. The physical properties of constituent elements (such as atomic mass, electronegativity, ionic radius) were used to define the feature of the compounds with a general formula 1M2M1X2X3X (1M + 2M: 1X + 2X + 3X = 2:3). The primary goal is to find new thermoelectric materials with the same rhombohedral structure as Bi2Te3 by machine learning. The final trained RF model showed a high accuracy of 91% on the prediction of rhombohedral compounds. Finally, we selected four important features to proceed with the polynomial fitting with the prediction results from the RF model and used the acquired polynomial function to make further discoveries outside the pre-defined material library.Graphical abstract

materials science, multidisciplinary,metallurgy & metallurgical engineering

Ensemble-machine-learning-based Correlation Analysis of Internal and Band Characteristics of Thermoelectric Materials

Predicting the Effective Thermal Conductivities of Composite Materials and Porous Media by Machine Learning Methods

Machine learning in thermoelectric materials identification: Feature selection and analysis

Machine Learning Based Feature Engineering for Thermoelectric Materials by Design

Thermoelectric Prediction from Material Descriptors Using Machine Learning Technique

Machine Learning Approaches for Thermoelectric Materials Research

Machine Learning for Predicting Ultralow Thermal Conductivity and High ZT in Complex Thermoelectric Materials

Assessing thermoelectric performance of quasi 0D carbon and polyaniline nanocomposites using machine learning

Influence of Molecular Layered Structure on Thermoelectric Properties of Materials

Feature Mining for Thermoelectric Materials based on Interpretable Machine Learning

Combining Machine Learning Models with First-Principles High-Throughput Calculation to Accelerate the Search of Promising Thermoelectric Materials

A Critical Review of Machine Learning Techniques on Thermoelectric Materials

Prediction of lattice thermal conductivity with two-stage interpretable machine learning

A multi-objective, multi-interpretable machine learning demonstration verified by domain knowledge for ductile thermoelectric materials

Predicting interfacial thermal resistance by machine learning

Knowledge extraction and performance improvement of Bi2Te3-based thermoelectric materials by machine learning

Prediction of thermoelectric-figure-of-merit based on autoencoder and light gradient boosting machine

Predicting lattice thermal conductivity from fundamental material properties using machine learning techniques

Predicting Thermoelectric Transport Properties from Composition with Attention-based Deep Learning

Machine learning assisted discovering of new M2X3-type thermoelectric materials