Abstract:Although Ni-rich layered oxides are considered a candidate of next-generation cathode materials, their inherent properties, such as surface lithium residues and structural destruction, cause detrimental electrochemical performance, especially at elevated temperatures. Here, a facile ball-milling method is proposed to remove the lithium residues and enhance the electrochemical performance of LiNi0.6Co0.2Mn0.2O2. After NH4VO3 treatment, a lithium ion-conductive Li3VO4 coating layer is found on the LiNi0.6Co0.2Mn0.2O2 surface at heat-treatment temperatures of 300 and 450 °C, with a small part of vanadium ions diffusing into the surface lattice. When the temperature surpasses 600 °C, almost all vanadium ions dope into the bulk structure. The complex relationships between the post-sintering temperature and surface structure and their impact on electrochemical properties are discussed in detail. Electrochemical tests show that 0.5 wt% NH4VO3 treated LiNi0.6Co0.2Mn0.2O2 at 450 °C exhibits much improved cycling stability (96.1% cycling retention at 0.5C after 100 cycles and 97.2% after 50 cycles at 55 °C), rate capability (117.0 mA h g-1 at 5C), and storage property (4683 ppm lithium residue amount after storing in air for 7 days). Such superior performance is ascribed to the Li3VO4 coating layer that inhibits the electrolyte decomposition and helps create a stable and thinner cathode-electrolyte interface, resulting in decreased interfacial resistance. In addition, this coating layer suppresses internal micro-stress and phase transformation from a layered to spinel and rock-salt structure, which increases the structural integrity of LiNi0.6Co0.2Mn0.2O2 during repeated charge-discharge cycling.

LixV2O5/LiV3O8 Nanoflakes with Significantly Improved Electrochemical Performance for Li-ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Synthesis and Electrochemical Properties of Nav3o8 Nanoflakes As High-Performance Cathode for Li-Ion Battery

Multi-layered Al 2 O 3 /Li x V 2 O 5 /LiV 3 O 8 nanoflakes with superior cycling stability as cathode material for Li-ion battery

Aqueous rechargeable lithium batteries using NaV<sub>6</sub>O<sub>15</sub> nanoflakes as high performance anodes

Open‐Structured V2O5·nH2O Nanoflakes As Highly Reversible Cathode Material for Monovalent and Multivalent Intercalation Batteries

Facile Synthesis and Lithium Storage Performance of (NH 4 ) 2 V 3 O 8 Nanoflakes

Ultrathin Fe2O3 nanoflakes using smart chemical stripping for high performance lithium storage

In–situ Construction of LixFeyOz Coatings on Cobalt–free Lithium–rich Cathode Materials for Enhanced Structural Stability and Electrochemical Performance

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a LixTM3-xO4-type spinel shell

In Situ-Formed LiVOPO4@V2O5 Core-Shell Nanospheres As a Cathode Material for Lithium-Ion Cells

An elaborate insight of lithiation behavior of V2O5 anode

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanobelts for Rechargeable Lithium Batteries

Reducing Hydrated Protons Co-Intercalation To Enhance Cycling Stability Of Cuv2o5 Nanobelts: A New Anode Material For Aqueous Lithium Ion Batteries

Large-scale Synthesis of Lithium- and Manganese-Rich Materials with Uniform Thin-Film Al 2 O 3 Coating for Stable Cathode Cycling

Synthesis and Characterization of Carbon-Coated Fe3O4 Nanoflakes As Anode Material for Lithium-Ion Batteries

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Revealing the Role of NH4VO3 Treatment in Ni-rich Cathode Materials with Improved Electrochemical Performance for Rechargeable Lithium-Ion Batteries

Nanoparticles Encapsulated in Porous Carbon Matrix Coated on Carbon Fibers: An Ultrastable Cathode for Li‐Ion Batteries

Ultrathin VO 2 (B) nanosheets assembled into 3D micro/nano structured flower-like microspheres for high-performance cathode materials of Li-ion batteries

Aqueous Rechargeable Lithium Batteries Using Nav6o15 Nanoflakes As High Performance Anodes