Abstract:With the development of wearable devices, the demand for pressure sensing has prompted the development of flexible pressure sensors with excellent overall performance, especially flexible piezoresistive sensors with long-term durability. In this study, covalently interconnected poly(vinyl alcohol-co-ethylene) (EVOH)/MWCNTs composite nanofibrous aerogels with typical “layer–pillar” hierarchical porous structure were prepared by hydroxyl aldehyde condensation to cross-link thermoplastic nanofibers and hydroxylated carbon nanotube. Benefiting from the porous structure of composite nanofibrous aerogels and robust bonding between EVOH and MWCNTs, the prepared composite nanofibrous aerogel exhibited an ultralow density (18.27 mg/cm3), excellent compressibility and restorability (up to 80% strain), and remarkable fatigue durability exceeding 1000 times. Meanwhile, the compressive strength of the cross-linked composite aerogel was increased by a factor of 3.5 compared to the un-cross-linked composite aerogel (9.70 kPa). The composite nanofibrous aerogel can be assembled as a piezoresistive sensor, with a sensing capacity up to 80% strain (corresponding to 33.49 kPa) and detection limit of 80 Pa. Furthermore, the dynamic strain sensitivity and pressure sensitivity of the piezoresistive sensor are GF = 1.51 and S = 0.28 kPa–1, respectively. More importantly, the cyclic stability of the pressure resistance sensor was outstanding; even after 3000 cycles, its curve remained essentially consistent with the initial 50 cycles. These successes ensure the excellent performance of EVOH/MWCNTs composite nanofibrous aerogels for sensitive monitoring of mechanical signals, such as body posture monitoring, and show the great potential of aerogel sensors as the next generation of wearable electronics.

Compressible AgNWs/Ti3C2TxMXene Aerogel-Based Highly Sensitive Piezoresistive Pressure Sensor As Versatile Electronic Skins

MXene@CTAB@CMF Three-Dimensional Elastic Base for Piezoresistive Pressure Sensors Realized by Electrostatic Self-Assembly

Bioinspired gradient stretchable aerogels for ultrabroad-response-range wearable pressure sensors

Lightweight, superelastic, and temperature-resistant rGO/polysulfoneamide-based nanofiber composite aerogel for wearable piezoresistive sensors

Covalently Interconnected Thermoplastic Polymeric Nanofiber/Carbon Nanotube Composite Nanofibrous Aerogels for Piezoresistive Sensors

Fragmented Graphene Aerogel/Polydimethylsiloxane Sponges for Wearable Piezoresistive Pressure Sensors

Hollow MXene Sphere/Reduced Graphene Aerogel Composites for Piezoresistive Sensor with Ultra‐High Sensitivity

Highly Compressible Elastic Aerogel Spring-Based Piezoionic Self-Powering Pressure Sensor for Multifunctional Wearable Electronics

Silver nanowires/waterborne polyurethane composite film based piezoresistive pressure sensor for ultrasensitive human motion monitoring

Highly Compressive Aerogel-Elastomer Hybrid Porous Material with Redistributed Strain for High-Sensitive Soft Pressure Sensors

Soft piezoresistive pressure sensing matrix from copper nanowires composite aerogel

Superhydrophobic MXene@carboxylated Carbon Nanotubes/carboxymethyl Chitosan Aerogel for Piezoresistive Pressure Sensor

Flexible pressure sensor decorated with MXene and multi-walled carbon nanotube composites for motion monitoring and electronic skin

3D Porous MXene Aerogel through Gas Foaming for Multifunctional Pressure Sensor

Flexible piezoresistive sensor constructing from ILs/MWCNTs/PVDF ternary composite for high sensitivity and wide detection range

Mixed-Dimensional MXene Nanocomposites/Aramid Nanofibers-Based Flexible Pressure and Strain Sensor for Electronic Skin

Highly Sensitive Wearable Pressure Sensor Over a Wide Sensing Range Enabled by the Skin Surface‐Like 3D Patterned Interwoven Structure

Lightweight and Mechanically Robust MXene/Polyimide/Silver Nanowire Composite Aerogels for Flexible Piezoresistive Sensors

Wide-temperature-range pressure sensing by an aramid nanofibers/reduced graphene oxide flakes composite aerogel

Ultralight and Hyperelastic Nanofiber‐Reinforced MXene–Graphene Aerogel for High‐Performance Piezoresistive Sensor

Biocompatible and breathable all-fiber-based piezoresistive sensor with high sensitivity for human physiological movements monitoring