Abstract:The emerging photovoltaic technology, namely perovskite photovoltaics, follows a style to the blooming flower with superficial prosperity described by the ancient poet Yuxi Liu. Metal-halide perovskite has become one of the most promising photovoltaic materials for thin-film solar-cell applications, mainly due to its exellent visible light capture capability, large diffusion coefficients and long diffusion lengths of charge carriers (both electrons and holes). The reported power conversion efficiency of laboratory produced perovskite solar cells (PSCs) has exceeded 25%. However, this value was only achieved for devices of less than 0.1 cm(2)dimensions, and decreases significantly with the increase in area (for example, down to 11.6% for a device area of similar to 800 cm(2), showing the issues with the scalability). In PSCs, the electron transport layer (ETL) has to perform two essential functions, which are related: (i) to collect and transfer charges after the injection of electrons from the perovskite light harvester; and (ii) to block the backflow of holes, thus realizing effective charge separation and suppressing charge carrier recombination. However, there are several critical issues associated with the ETLs which limit the further development of the PSCs. For example, the experimentally obtained open-circuit voltages in PSCs are typically much lower compared to the theoretical voltage limit with their optical bandgaps between 1.59 and 1.63 eV. This is mainly attributed to inefficient charge transport in the PSCs due to inhomogeneous charge accumulation and serious interfacial recombination at the interfaces between the ETL and the perovskite active layer. We scan recent developments of ETLs in PSCs, and discuss design methodologies, mechanisms, processing and characterization of new types of ETLs. High power conversion efficiency with large open-circuit voltages/photo-currents could be achieved through designing materials and microstructures for high-quality ETLs with a high electron mobility, high electrical conductivity and pinhole-free film morphology. It is crucial to balance the charge diffusion processes in the respective charge collective layers of PSCs as the interfaces between the ETLs and perovskites along with their interfacial structures play key roles in achieving new solid-state mesoscopic solar cells optimized open circuit voltages and output photocurrents.

Metal oxide alternatives for efficient electron transport in perovskite solar cells: beyond TiO<sub>2</sub>and SnO<sub>2</sub>

Metal Oxide Alternatives for Efficient Electron Transport in Perovskite Solar Cells: Beyond TiO2 and SnO2

Recent Advances in Metal Oxide Electron Transport Layers for Enhancing the Performance of Perovskite Solar Cells

Modification of SnO2 electron transport Layer: Brilliant strategies to make perovskite solar cells stronger

Progress of solution-processed metal oxides as charge transport layers towards efficient and stable perovskite solar cells and modules

Robust Electron Transport Layer of SnO2 for Efficient Perovskite Solar Cells: Recent Advances and Perspectives

Regulation of SnO2 Electron Transport Layers for Perovskite Solar Cells

Complex Metal Oxides as Emerging Inorganic Hole-Transporting Materials for Perovskite Solar Cells

Advances of Electron Transport Materials in Perovskite Solar Cells: Synthesis and Application

To Be Higher and Stronger-Metal Oxide Electron Transport Materials for Perovskite Solar Cells

Emerging Trends in Electron Transport Layer Development for Stable and Efficient Perovskite Solar Cells

Tin Oxide Bilayer as Effective Electron Transport Layers for Efficient and Stable Perovskite Solar Modules

Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells

Advances in design engineering and merits of electron transporting layers in perovskite solar cells

Materials and Structures for the Electron Transport Layer of Efficient and Stable Perovskite Solar Cells

Recent Progress on Applications of Nano Metal Oxides in Perovskite Solar Cells

TiO2/SnO2 Bilayer Electron Transport Layer for High Efficiency Perovskite Solar Cells

SnO2-Ti3C2 Blends As Electron Transport Layer for Efficient and Easily Fabricated Planar Perovskite Solar Cells

Rational design of SnO 2 -based electron transport layer in mesoscopic perovskite solar cells: more kinetically favorable than traditional double-layer architecture

SnO2-Based Perovskite Solar Cells: Configuration Design and Performance Improvement

Metal oxide charge transport layers in perovskite solar cells—optimising low temperature processing and improving the interfaces towards low temperature processed, efficient and stable devices