Abstract:Previous studies on the austenite grain growth were mostly based on a fixed temperature, and the relationship between the austenite grain and austenitizing parameters was fitted according to the results. However, there is a lack of quantitative research on the austenite grain growth during the heating process. In the present work, based on the diffusion principle of the controlled Ti microalloying element, the diffusion process of carbonitrides containing Ti during the heating process was analyzed. Combined with the precipitation model and the austenite growth model, the prediction model of austenite grain growth of Ti microalloyed steel during different heat treatment processes was established. The austenite grain size versus the temperature at four different heating rates of 0.5, 1, 10, 100 °C/s was calculated. The grain growth behavior of austenite during the heating process of Ti microalloyed steel was studied by optical microscope, scanning electron microscope and transmission electron microscope. The experimental data of the austenite grain size was in good agreement with the calculation by the proposed model, which provides a new idea for the prediction of austenite grain size in non-equilibrium state during the heating process. In addition, for Ti-containing microalloyed steels, the austenite grain size increased with the increasing heating temperature, while it changed little by further prolonging isothermal time after certain heating time, which was related to the equilibrium degree of the precipitation and the dissolution of Ti element. The austenite grain coarsening temperature of the tested Ti microalloyed steel was estimated within 1100~1200 °C.

Effect of Solute Drag and Precipitate Pinning on Austenite Grain Growth in Ti-Nb Microalloyed Steels

Austenite Grain Growth Prediction Coupling with Drag and Pinning Effects in Low Carbon Nb Microalloyed Steels

EFFECT OF Nb SOLUTE DRAG AND NbC PRECIPI-TATE PINNING ON THE RECRYSTALLIZATION GRAIN GROWTH IN LOW CARBON Nb--MICROACLOYED STEEL

The Influence of Precipitate Morphology on the Growth of Austenite Grain in Nb-Ti-Al Microalloyed Steels

Study of the kinetics of austenite grain growth by dynamic Ti-rich and Nb-rich carbonitride dissolution in HSLA steel: In-situ observation and modeling

Effect of Precipitates on Austenite Grain Growth Behavior in a Low-Carbon Nb-V Microalloyed Steel

Nb–Ti Composite Precipitation Behaviour and Its Effect on the Growth of Austenite Grains in Peritectic Steel

Effects of Two Different Types of MX Carbonitrides on Austenite Growth Behavior of Nb-V-Ti Microalloyed Ultra-High Strength Steel

Effect of Precipitates on the Austenite Grain Growth of Titanium Microalloyed High Performance Steel

In Situ Observation and Modeling of Austenite Grain Growth in a Nb–Ti-bearing High Carbon Steel

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel

Study of Transformation Characteristics and Nano-Scale Precipitation in Nb Microalloyed Steel

Strain-induced Precipitation Kinetics of Nb(C,N) and Precipitates Evolution in Austenite of Nb–Ti Micro-Alloyed Steels

Effect of Nb on Austenite Grain Growth in 10Cr-3Co-2W Martensitic Heat-Resistant Steel

Effect of Nb Element on Austenite Grain Growth of Medium Carbon Steel in Heating Process

EFFECTS OF Nb ON RECOVERY OF HOT--DEFORMED AUSTENITE

Precipitation Behaviour of Carbonitrides in Ti-Nb-C-N Microalloyed Steels and an Engineering Application with Homogenously Precipitated Nano-Particles

Effect of Precipitated Particles on Austenite Grain Growth of Al- and Nb-Microalloyed 20MnCr Gear Steel

Numerical Simulation on Recrystallization of Coarse-Grained Austenite in Low-Carbon Nb-microalloyed Steel

Recrystallization, Precipitation Behaviors, and Refinement of Austenite Grains in High Mn, High Nb Steel