Abstract:The solidification behaviours and microstructural characteristics of both ZA27/SiCp composites and monolithic ZA27 alloy were studied by using differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and X-ray diffraction, It was found that there were differences in the transformation temperature and volume fraction of the phases, although the solidification process was almost identical for the composite and the monolithic alloy. The incorporation of SiC particles in the ZA27 alloy led to slight refinement of primary grains and reduced volume fraction of eutectic-like phase. The SiC particles obstructed Zn diffusion in the residual melt during the formation of proeutectic beta phase, but promoted Zn diffusion from alpha (Al) to eta (Zn) phase during eutectoid transformation. During solidification, Cu was mainly segregated in the final solidification regions; Mg was present not only in the matrix but also on SiC particles; and oxide inclusions were mainly distributed around SiC particles, The matrix microstructure for both materials mainly consisted of primary cores of Al rich alpha + eta eutectoid; beta' phase resulting from the eutectoid transformation of the proeutectic beta phase; and Zn rich alpha + eta eutectoid resulting from the eutectoid transformation of the eutectic-like phase. The SiC particles were mainly distributed around the primary grains, Several new phases based on the Al-Zn-Mg-Cu system and interfacial reaction products, including Al21Fe3Si, Cu5Zn8, Mg6Cu3Al7, MgAl2O4, and amorphous oxide inclusions, were identified in the final solidification regions. The nucleation of both primary alpha phase and eutectic-like alpha + eta phase at the surface of SIC particles and their crystallographic orientation relationships were investigated theoretically and experimentally. No distinct crystallographic orientation relationship between the matrix and SiC has been identified, although the mismatch between (0001)(SiC) and (111)(alpha) was calculated to be as small as 7.6%.

Thermophysical, Thermochemical Behavior of Cu Coated Sic Composite Particles

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Preparation of TiO2/SiO2 Composite by Chemical Coating Method

Characterization of a Powder Metallurgy SiC/Cu–Al Composite

Microstructure and properties of plasma sprayed copper-matrix composite coatings with Ti3SiC2 addition

High Temperature Oxidation Behavior of SiC Coating Materials

Experimental and first-principles simulation study on oxidation behavior at 1700 °C of Lu2O3–SiC-HfB2 ternary coating for SiC coated carbon/carbon composites

The anti‐oxidation behavior of the Ti3SiC2/Cu composites at high temperatures

High-temperature oxidation and ablation behavior of plasma sprayed LaB6-MoSi2-TiB2 composite coating

Interaction of a Ti⁻Cu Alloy with Carbon: Synthesis of Composites and Model Experiments

Investigation on the oxidation and ablation behaviors of HfB2-SiC-Si/SiC-Si coatings for carbon/carbon composites

Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process

An oxidation protective coating prepared by SiC densifying HfB2-SiC skeleton for SiC-coated C/C composites at 1473, 1773, and 1973 K

Decomposition and dewetting of super-saturated Cu-15 at. % Co solid solution film

Chemical synthesis, characterization and spark plasma sintering of cu and Cu/TiO2 composite powders

PROCESS AND MECHANISM OF MICROWAVE SINTERING OF SiC-Cu/Al COMPOSITES

SiC Performance of Coated Fuel Particles under High-Temperature Atmosphere of Air

Thermodynamic Analysis of Chemical Vapor Deposition Process for SiC/SiO2 Graded Composite Coating

Structure and High-Temperature Oxidation Performance of Si-Co Diffusion Coatings Prepared on a TiAl-Nb Alloy

Optimisation of Properties of Ti3SiC2 Reinforced Copper Matrix Composites