Effect of cooling medium on the preparation and microwave absorption properties in low frequency for LiZn ferrites hollow microspheres
Xudong Cai,Haiqiong Guo,Huijie Zhu,Defei Yin,Honggui Guo,Daokun Bi,Kejing Yu,Hui Yang,Jialiang Pan
DOI: https://doi.org/10.1016/j.jallcom.2022.164290
IF: 6.2
2022-06-01
Journal of Alloys and Compounds
Abstract:The lack of research on low-frequency absorbing materials working at frequencies lower than 8 GHz makes it difficult to meet the military needs of the large wavelength electromagnetic shielding. In this study, crystalline and amorphous lithium zinc ferrites hollow microspheres (LiZn FHMs) were prepared by self-reactive quenching technology, based on Fe+Zn+Fe2O3 +O2 +Li2CO3 reactive system, using distilled water and 15 wt% NaCl solution as cooling medium, respectively. Effect of cooling medium on the formation mechanism and microwave absorption properties in low frequency range for two kinds of LiZn FHMs was studied. The results show that LiZn FHMs surface with distilled water as cooling medium has polygonal crystal structure. While the surface of LiZn FHMs is smooth by using 15 wt% NaCl solution, and XRD patterns prove that LiZn FHMs are of amorphous structures. When the cooling medium is changed from distilled water to NaCl solution, the magnetic loss of amorphous LiZn FHMs changes from double loss mechanism (natural resonance and eddy current loss) to a single loss mechanism (natural resonance). Compared with crystalline materials, the emergence of "rheology unit" and the change of magnetic loss mechanism are the main reasons for the improvement of microwave absorption properties in low frequencies. When the thickness of the amorphous sample is equal to 2 mm, the minimum reflectivity is −29.8 dB, and the corresponding frequency is 7.1 GHz. The absorption frequency band below −10 dB is 5.3–10.3 GHz, and its bandwidth is 5 GHz. This effectively meets the low frequency new absorbent "thin, light, wide and strong" demand, and it could be promising in the application of invisible coatings on the weapon equipments. The survival performances of weapon equipments in the complex electromagnetic field are expected to be improved.
materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering