Abstract:Broadband high absorption of long-wavelength infrared light for rough submicron active material films is quite challenging to achieve. Unlike conventional infrared detection units, with over three-layer complex structures, a three-layer metamaterial with mercury cadmium telluride (MCT) film sandwiched between an Au cuboid array and Au mirror is studied through theory and simulations. The results show that propagated/localized surface plasmon resonance simultaneously contribute to broadband absorption under the TM wave of the absorber, while the Fabry-Perot (FP) cavity resonance causes absorption of the TE wave. As surface plasmon resonance concentrates most of the TM wave on the MCT film, 74% of the incident light energy is absorbed by the submicron thickness MCT film within the 8-12 μm waveband, which is approximately 10 times than that of the rough same thickness MCT film. In addition, by replacing the Au mirror with Au grating, the FP cavity along the y-axis direction was destroyed, and the absorber exhibited excellent polarization-sensitive and incident angle-insensitive properties. For the corresponding conceived metamaterial photodetector, as carrier transit time across the gap between Au cuboid is much less than that of other paths, the Au cuboids simultaneously act as microelectrodes to collect photocarriers generated in the gap. Thus the light absorption and photocarrier collection efficiency are hopefully improved simultaneously. Finally, the density of the Au cuboids is increased by adding the same arranged cuboids perpendicular to the original direction on the top surface or by replacing the cuboids with crisscross, which results in broadband polarization-insensitive high absorption by the absorber.

Localized surface plasmon resonance based tunable dual-band absorber within 1-10 mu m

Multi-narrowband absorber based on subwavelength grating structure

Broadband infrared plasmonic metamaterial absorber with multipronged absorption mechanisms.

Near Perfect Absorber for Long-Wave Infrared Based on Localized Surface Plasmon Resonance

Multiband-switchability and high-absorptivity of a metamaterial perfect absorber based on a plasmonic resonant structure in the near-infrared region

A Tunable Triple-Band Near-Infrared Metamaterial Absorber Based on Au Nano-Cuboids Array

Ultra-broadband metamaterial absorber for collecting electromagnetic waves from the ultraviolet to the mid-infrared

Enhance Absorption Based On The Resonance Of Localized Surface Plasmon Modes In A Metamaterial Absorber

Dual-Band Absorber for Multispectral Plasmon-Enhanced Infrared Photodetection

Ultra-broadband absorber from visible to near-infrared using plasmonic metamaterial.

Tunable Dual-Band Metamaterial Absorber in the Infrared Range Based on Split-Ring-groove Array.

Study on Long Wavelength Infrared Broadband Metasurface Absorber Via Hybrid Resonant Mode

Ultra Narrow Dual-Band Perfect Absorber Based on a Dielectric−Dielectric−Metal Three-Layer Film Material

Broadband long-wave infrared high-absorption of active materials through hybrid plasmonic resonance modes

Design of Broadband Metamaterial Absorbers in the Near‐Infrared Region

Small-period Ultra-broadband Long-wavelength Infrared Metamaterial Absorber

Dual-band Perfect Absorbers Based on the Magnetic Resonance and the Cavity Resonance

Realization of a Multi-Band Terahertz Metamaterial Absorber Using Two Identical Split Rings Having Opposite Opening Directions Connected by a Rectangular Patch.

Design of a Far-Infrared Broadband Metamaterial Absorber with High Absorption and Ultra-Broadband

The Study of Midinfrared Extremely Narrow Dual-Band Absorber Based on a Novel Metamaterial Structure

Bifunctional plasmonic metamaterial absorber for narrowband sensing detection and broadband optical absorption