Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

A Design and Rating Method for Shell-and-Tube Heat Exchangers with Helical Baffles

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Numerical Investigation and Optimization on Shell Side Performance of A Shell and Tube Heat Exchanger with Inclined Trefoil-Hole Baffles

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

OPTIMIZATION OF SHELL AND TUBE HEAT EXCHANGER DESIGN WITH INCLINED BAFFLES

Developing an algorithm to evaluate the tube and baffle choice influences on enhancing the hydrothermal performances of shell and tube heat exchangers

Optimized Design of Shell and Tube Heat Exchanger with Segmental Baffles

Configuration Optimization of a Shell-and-Tube Heat Exchanger with Segmental Baffles Based on Combination of NSGAII and MOPSO Embedded Grouping Cooperative Coevolution Strategy

Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations

Performance investigation and multi-objective optimization of helical baffle heat exchangers based on thermodynamic and economic analyses

Computation of thermal properties of CMSP shell and tube heat exchanger using different types of helical baffles

Experimental investigation of heat transfer characteristics for a shell and tube heat exchanger

An innovative cost-effective numerical-analytical procedure to derive heat correlations for shell and tube heat exchangers equipped with smooth and dimple tubes

Numerical investigation of the effect of the structure and number of spiral baffles on the vibration and heat transfer coefficient of spiral tubes within spiral tube heat exchangers

Shell and tube heat exchanger thermal-hydraulic analysis equipped with baffles and corrugated tubes filled with non-Newtonian two-phase nanofluid

Numerical investigation of the enhanced heat transfer characteristics in dimpled enhanced tube to shell-and-tube lube oil heat exchangers

DESIGN AND SIMULATION OF SHELL-AND-TUBE HEAT EXCHANGER (STHE) WITH THE EFFECT OF BAFFLES USING CFD-TOOL

Performance Analysis and Structural Optimization of Torsional Flow Heat Exchangers with Sinusoidal Corrugated Baffle

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Experimental Study of Stationary-Head/Channel Cover STHE Prototype Using ε-NTU Method