Abstract:High adsorption capacity, fast adsorption kinetics, good reusability and low cost are highly demanded for adsorbents used in practical adsorption process. In this study, a porous double network Jute/Polyacrylic acid (Jute/PAA) gel was prepared using simple free-radical polymerization of acrylic acid in Jute aqueous solution. The high permeability of Jute/PAA hydrogel with about 80 wt% water made internal adsorption sites fully expose to metal ions. The Jute/PAA gel adsorbent could efficiently adsorb heavy metals in melting wastewater, especially Cd2+ and Pb2+. The adsorbent showed very high adsorption capacities of 401.7 mg/g for Cd2+ and 542.9 mg/g for Pb2+. Moreover, the adsorption equilibrium reached within only 10 min for 40 mg/L of Cd2+ and Pb2+ using 1 g/L adsorbent. Meanwhile, the removal efficiencies reached 81.0% for Pb (C0 = 3.825 mg/L), 79.3% for Cd (C0 = 6.075 mg/L), 83.4% for Cu (C0 = 9.325 mg/L), 29.8% for Zn (C0 = 188.6 mg/L), 22.3% for Mn (C0 = 17.05 mg/L), 96.2% for Cr (C0 = 0.25 mg/L) and 99.8% for Fe (C0 = 9.75 mg/L) in melting wastewater using 1 g/L adsorbent in 2 h. In particular, the concentrations of Pb, Cd and Cr decreased below 0.001 mg/L using 4 g/L adsorbent. In the fixed-bed column experiments, the treatment volume of melting wastewater reached 2900 BV (32.8 L) only producing 50 BV (565 mL) eluent. This work develops a highly practical adsorption process based on hydrogel adsorbents for the removal of heavy metals in actual wastewater.

Selective Removals of Heavy Metals (pb2+, Cu2+, and Cd2+) from Wastewater by Gelation with Alginate for Effective Metal Recovery

Selective removals of heavy metals (Pb(2+), Cu(2+), and Cd(2+)) from wastewater by gelation with alginate for effective metal recovery.

Alginate production of Pseudomonas strains and its application in preparation of alginate-biomass hydrogel for heavy metal adsorption

A biomass resource strategy for alginate-polyvinyl alcohol double network hydrogels and their adsorption to heavy metals

Novel Alginate/polyethyleneimine Hydrogel Adsorbent for Cascaded Removal and Utilization of Cu2+ and Pb2+ Ions.

Fabrication of Sodium Alginate Porous Scaffolds for Heavy Metal Ion Removal from Aqueous Solution

Efficient Removal of Heavy Metals from Melting Effluent Using Multifunctional Hydrogel Adsorbents.

Efficient Heavy Metal Removal From Industrial Melting Effluent Using Fixed-Bed Process Based On Porous Hydrogel Adsorbents

Recent Advances in Alginate-Based Composite Gel Spheres for Removal of Heavy Metals

All-Biomass Double Network Gel: Highly Efficient Removal of Pb 2+ and Cd 2+ in Wastewater and Utilization of Spent Adsorbents

Ion-Induced Synthesis of Alginate Fibroid Hydrogel for Heavy Metal Ions Removal

Porous sodium alginate/cellulose nanofiber composite hydrogel microspheres for heavy metal removal in wastewater

A Novel Double-Network Hydrogel Made from Electrolytic Manganese Slag and Polyacrylic Acid-Polyacrylamide for Removal of Heavy Metals in Wastewater

Preparation of Modified Sodium Alginate Aerogel and Its Application in Removing Lead and Cadmium Ions in Wastewater.

Performance and Mechanism of L-arginine Modifed Alginate Aerogels for Adsorption of Cadmium and Copper Ions

Efficient heavy metal removal from water by alginate-based porous nanocomposite hydrogels: The enhanced removal mechanism and influencing factor insight

Dual-use of Sodium Alginate to Prepare Sodium Algenate -Derived Carbon Dots Sodium Algenate Hydrogel Composite for Pb2+ Removal

Effective Removal of Cyanide and Heavy Metals from an Industrial Electroplating Stream Using Calcium Alginate Hydrogels

Removal of lead ions from wastewater using magnesium sulfide nanoparticles caged alginate microbeads

Efficient Removal of Heavy Metal Ions with an EDTA Functionalized Chitosan/Polyacrylamide Double Network Hydrogel

A study on a fixed-bed for Pb(ii) removal by modified alkaline lignin-sodium alginate composite hydrogel