Abstract:A linear failure criterion is widely used in slope stability analyses. However, the strength envelope of almost all geomaterials has the nature of nonlinearity. This paper computes rigorous upper bounds on slope stability factors under the condition of plane strain with a nonlinear yield criterion by employing the upper bound theorem of plasticity. A stability factor (or a limit load) computed using a linear Mohr-Coulomb (MC) failure criterion which circumscribes the actual nonlinear failure criterion is an upper bound value of the actual stability factor (or limit load). In this paper, an improved method using a generalized tangential technique to approximate a nonlinear failure criterion is proposed to estimate the stability factor of a slope on the basis of the upper bound theorem of plasticity. Using the generalized tangential technique, the curve of the nonlinear failure criterion is simplified as a set of straight lines according to the linear MC failure criterion. The straight line is tangential to the curve of the nonlinear failure criterion. The set of straight lines of the linear MC failure criterion is employed to formulate the slope stability problem as a classical optimization problem. The objective function formulated in this way is minimized with respect to the location of sliding body center and the location of tangency point. Two typical slope stability problems (a homogeneous soil slope with two slope angles and a vertical cut slope with a tension crack) are analyzed using the proposed method. For the soil slope with two slope angles, the computed results are compared with published solutions by others. The comparison shows that the proposed method gives reasonable and consistent values of the stability factor of the slope. For the vertical cut slope with a tension crack, a statically admissible stress field is constructed for the slope. The stress field does not violate the nonlinear failure criterion. Lower bound solutions are obtained by satisfying stress equilibrium conditions. The upper bound solutions obtained from the proposed method are equal to the lower bound solutions for the vertical cut slope. The agreement further supports the validation of the proposed approach. The influences of the strength parameters in the nonlinear criterion on the stability of slopes are also studied and discussed in this paper.

Discussion of "evaluation of Interslice Force Function and Discussion on Convergence in Slope Stability Analysis by the Lower Bound Method" by Y. M. Cheng, Z. H. Zhao, and Y. J. Sun

Evaluation of Interslice Force Function and Discussion on Convergence in Slope Stability Analysis by the Lower Bound Method

Slope Stability Analysis Using Slice-Wise Factor of Safety

Kinematical Analysis of Slope Stability Using Triangular Slices Method

Upper Bound Limit Analysis of Slope Stability Based on Translational and Rotational Failure Mechanism

Evaluating Slope Stability with 3D Limit Equilibrium Technique and Its Application to Landfill in China

Internal Force Calculation and Stability Analysis of the Slope Reinforced by Pre-Stressed Anchor Cables and Frame Beams

A LIMIT EQUILIBRIUM METHOD BASED ON MORGENSTERN-PRICE METHOD FOR 3D SLOPE STABILITY ANALYSIS

Slope Failure Criteria of Shear Strength Reduction Finite Element Method

REALIZATION OF PAN JIAZHENG'S EXTREMUM PRINCIPLE WITH OPTIMIZATION METHODS

Theoretical studies and applications of an upper-bound stability analysis method based on the failure mode of inclined slices

Slope Stability Analysis Considering Different Contributions of Shear Strength Parameters

Stability analysis of unsaturated soil slope by 3-D strength reduction FEM

Upper Bound Limit Analysis of Slope Stability by Element Integration Method

Slope Stability Analysis with Nonlinear Failure Criterion

Stability analysis of reservoir slopes under fluctuating water levels using the combined finite-discrete element method

Discontinuous rock slope stability analysis by limit equilibrium approaches – a review

Slope stability analysis based on the rigid finite element method

Stability Evaluation of Strain-Softening Slope Based on Swedish Slice Method

LEM-DEM Coupling for Slope Stability Analysis

Stability analysis of unsaturated–saturated soil slopes under rainfall infiltration using the rigorous limit equilibrium method