Abstract:The cross-shaped stiffened concrete-filled steel tubular stub column is constructed by incorporating steel reinforcement ribs into the traditional cross-shaped design, which helps delay the buckling of the steel tube and enhances its restraining effect on the concrete. However, existing standards and research proposed design methods for estimating the post-fire bearing capacity of steel reinforced concrete stub columns are primarily applicable to the ordinary steel tubes with conventional thickness and sections. Therefore, it is necessary to investigate the axial compressive properties of high-strength concrete stub columns with irregular thin-walled steel tubes after exposure to fire, which can contribute to their potential future application. Effects of various experimental parameters, such as heating time, width-thickness ratio, and longitudinal spacing of stiffeners were investigated. In total one specimen subjected to ambient temperature and eight cross-shaped stiffened concrete-filled steel tubular stub columns subjected to fire conditions were prepared for measuring temperature-time curves of specimens during ISO-834 standard fire, load-displacement curves, load-transverse, and longitudinal strain curves of specimens under axial compression loading. The failure modes of the specimens were recorded, and the influence of each parameter on the post-fire mechanical properties of the specimens was analyzed based on the experimental results. ABAQUS software was utilized to develop a model for post-fire analysis, which was validated by comparing it with experimental data. After validation, the model was used to analyze the underlying mechanism, and a comprehensive parametric study of members was conducted. Based on the results of the parametric study and the model developed for calculating bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column at ambient temperature, a simplified equation accounting for the effects of elevated temperature was proposed to predict the residual bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column after fire exposure. The average error between the simplified formula and the finite element simulation results is 0.925, and the mean square error is 0.085.

Fire Behaviour of High Strength Self-Consolidating Concrete Filled Steel Tubular Stub Columns

Fire Behavior and Performance of Concrete-Filled Steel Tubular Columns: Review and Discussion

Effects of sustained axial load and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Effects of preload and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Cyclic Behaviours Of Concrete-Filled Steel Tubular Columns With Pre-Load After Exposure To Fire

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

Fire performance of self-consolidating concrete filled double skin steel tubular columns: Experiments

Performance of Concrete-Filled Stainless Steel Tubular Stub Columns with Embedded Steels after Exposure to Fire

Analytical Behaviour Of Concrete-Filled Double Skin Steel Tubular Stub Columns After Exposure To Fire

Testing of Self-Consolidating Concrete-Filled Double Skin Tubular Stub Columns Exposed to Fire

Experimental investigation on fire performance of self-consolidating concrete (SCC) filled double skin tubular columns

Analysis on resistance on and after exposure to standard fire of short centrifuge concrete-filled steel tubular colunms

FE analysis of self-consolidating concrete filled double skin tubular columns subjected to fires

Seismic Behavior of Fire-Exposed Concrete-Filled Steel Tubular (CFST) Columns

Tests on fibre reinforced scc filled double skin tubular stub columns exposed to standard fire

Fire test and simulation of circular steel tube confined steel-reinforced concrete columns

Experimental and Numerical Investigation of Concrete-Filled Stainless Steel Columns Exposed to Fire

EXPERIMENTAL ANALYSIS AND SIMULATION OF SLENDER CONCRETE-FILLED STEEL TUBULAR COLUMN UNDER COMBINED FIRE AND LOADING

Performance of concrete-filled stainless steel tubular (CFSST) columns after exposure to fire

Axial compression behaviour and design of square tubed steel reinforced-concrete stub columns after fire exposure

Fire resistance of SCC filled square hollow structural steel sections