3D-Printed Poly-Caprolactone Scaffolds Modified With Biomimetic Extracellular Matrices for Tarsal Plate Tissue Engineering (vol 8, 219, 2020)

Liangbo Chen,Dan Yan,Nianxuan Wu,Weijie Zhang,Chenxi Yan,Qinke Yao,Christos C. Zouboulis,Hao Sun,Yao Fu

DOI: https://doi.org/10.3389/fbioe.2020.00548

IF: 5.7

2020-01-01

Frontiers in Bioengineering and Biotechnology

Abstract:[This corrects the article DOI: 10.3389/fbioe.2020.00219.].

What problem does this paper attempt to address?

Corrigendum: 3D-Printed Poly-Caprolactone Scaffolds Modified With Biomimetic Extracellular Matrices for Tarsal Plate Tissue Engineering

Liangbo Chen,Dan Yan,Nianxuan Wu,Weijie Zhang,Chenxi Yan,Qinke Yao,Christos C. Zouboulis,Hao Sun,Yao Fu

DOI: https://doi.org/10.3389/fbioe.2020.00548

IF: 5.7

2020-06-03

Frontiers in Bioengineering and Biotechnology

Abstract:[This corrects the article DOI: 10.3389/fbioe.2020.00219.].

multidisciplinary sciences
Corrigendum: Three-Dimensional Cartilage Regeneration Using Engineered Cartilage Gel With a 3D-Printed Polycaprolactone Framework.

Gaoyang Wu,Lixing Lu,Zheng Ci,Yahui Wang,Runjie Shi,Guangdong Zhou,Shengli Li

DOI: https://doi.org/10.3389/fbioe.2022.951730

IF: 5.7

2022-01-01

Frontiers in Bioengineering and Biotechnology

Abstract:[This corrects the article DOI: 10.3389/fbioe.2022.871508.].
Correction: Zhu et al. Mineralized Collagen/Polylactic Acid Composite Scaffolds for Load-Bearing Bone Regeneration in a Developmental Model. Polymers 2023, 15, 4194

Wenbo Zhu,Wenjing Li,Mengxuan Yao,Yan Wang,Wei Zhang,Chao Li,Xiumei Wang,Wei Chen,Hongzhi Lv

DOI: https://doi.org/10.3390/polym16020279

IF: 5

2024-01-20

Polymers

Abstract:Polymers, Vol. 16, Pages 279: Correction: Zhu et al. Mineralized Collagen/Polylactic Acid Composite Scaffolds for Load-Bearing Bone Regeneration in a Developmental Model. Polymers 2023, 15, 4194 Polymers doi: 10.3390/polym16020279 Authors: Wenbo Zhu Wenjing Li Mengxuan Yao Yan Wang Wei Zhang Chao Li Xiumei Wang Wei Chen Hongzhi Lv In the original publication [...]

polymer science
4D polycarbonates via stereolithography as scaffolds for soft tissue repair

Andrew C. Weems,Maria C. Arno,Wei Yu,Robert T. R. Huckstepp,Andrew P. Dove

DOI: https://doi.org/10.1038/s41467-021-23956-6

IF: 16.6

2021-07-05

Nature Communications

Abstract:Abstract 3D printing has emerged as one of the most promising tools to overcome the processing and morphological limitations of traditional tissue engineering scaffold design. However, there is a need for improved minimally invasive, void-filling materials to provide mechanical support, biocompatibility, and surface erosion characteristics to ensure consistent tissue support during the healing process. Herein, soft, elastomeric aliphatic polycarbonate-based materials were designed to undergo photopolymerization into supportive soft tissue engineering scaffolds. The 4D nature of the printed scaffolds is manifested in their shape memory properties, which allows them to fill model soft tissue voids without deforming the surrounding material. In vivo, adipocyte lobules were found to infiltrate the surface-eroding scaffold within 2 months, and neovascularization was observed over the same time. Notably, reduced collagen capsule thickness indicates that these scaffolds are highly promising for adipose tissue engineering and repair.

multidisciplinary sciences
Fabrication and Application of a 3D-Printed Poly-ε-Caprolactone Cage Scaffold for Bone Tissue Engineering

Siyi Wang,Rong Li,Yongxiang Xu,Dandan Xia,Yuan Zhu,Jungmin Yoon,Ranli Gu,Xuenan Liu,Wenyan Zhao,Xubin Zhao,Yunsong Liu,Yuchun Sun,Yongsheng Zhou

DOI: https://doi.org/10.1155/2020/2087475

2020-01-01

BioMed Research International

Abstract:Poly-ε-caprolactone (PCL) is a promising synthetic material in bone tissue engineering (BTE). Particularly, the introduction of rapid prototyping (RP) represents the possibility of manufacturing PCL scaffolds with customized appearances and structures. Bio-Oss is a natural bone mineral matrix with significant osteogenic effects; however, it has limitations in being constructed and maintained into specific shapes and sites. In this study, we used RP and fabricated a hollow-structured cage-shaped PCL scaffold loaded with Bio-Oss to form a hybrid scaffold for BTE. Moreover, we adopted NaOH surface treatment to improve PCL hydrophilicity and enhance cell adhesion. The results showed that the NaOH-treated hybrid scaffold could enhance the osteogenesis of human bone marrow-derived mesenchymal stem cells (hBMMSCs) both in vitro and in vivo. Altogether, we reveal a novel hybrid scaffold that not only possesses osteoinductive function to promote bone formation but can also be fabricated into specific forms. This scaffold design may have great application potential in bone tissue engineering.
Toward Biomimetic Porous Poly(ε-Caprolactone) Scaffolds: Structural Evolution and Morphological Control During Solid Phase Extrusion

Hua-Mo Yin,Yan-Fei Huang,Yue Ren,Peng Wang,Baisong Zhao,Ji-Hua Li,Jia-Zhuang Xu,Zhong-Ming Li

DOI: https://doi.org/10.1016/j.compscitech.2018.01.009

IF: 9.1

2018-01-01

Composites Science and Technology

Abstract:Two-dimensional oriented scaffolds bear spatial limitation to regenerate three-dimensional (3D) tissues despite showing the ability to guide cell alignment and elongation. By combining solid phase extrusion (SPE) of co-continuous blends with phase removal, we prepared an interconnected 3D porous poly(ε-caprolactone) (PCL) scaffold with oriented pores. To better regulate structure of these distinctive scaffolds, structural evolution of co-continuous blends in the convergent die during SPE was investigated in this study. Morphological observation manifested that the elongation deformation of co-continuous blends proceeded along the extrusion direction in the converging die continuously. Due to the extrusion temperature below the melting point of the matrices, the aligned co-continuous phase was maintained to form the uniformly oriented pores after phase extraction. Unlike consecutive deformation of phase morphology, the change in the crystalline structure of PCL involved two stages divided by the critical deformation distance (∼10 mm). At stage I (<10 mm), spherical crystals of PCL transformed into ellipsoidal shape owing to plastic deformation. At stage II (>10 mm), organized PCL lamellae formed along the extrusion direction as a result of crystal fragmentation and rearrangement. On the basis of anterior cognition, effects of processing parameters on porous morphology were further explored. It was revealed that extrusion draw ratio and annealing time were more effective to regulate pore orientation and size of aligned porous scaffolds than extrusion temperature. The tunable morphological structure of biomimetic scaffolds is of vital importance to broaden their applications for tissue repair.
The Enhanced Osteogenesis and Osteointegration of 3-DP PCL Scaffolds Via Structural and Functional Optimization Using Collagen Networks.

Jinbing Wang,Chucheng Lin,Xin Gao,Zhiwei Zheng,Mimgming Lv,Jian Sun,Zhiyong Zhang

DOI: https://doi.org/10.1039/c8ra05615c

IF: 4.036

2018-01-01

RSC Advances

Abstract:Optimal balance between biological activity and mechanical stability should be meticulously considered during scaffold design for bone tissue engineering applications. To fabricate an individualized construct with biomechanical and biological functionality for bone tissue regeneration, a polycaprolactone-collagen (PCL-COL) composite construct was developed through the combination of three-dimensional printing (3-DP) technology and biomimetic collagen matrix incorporation, with a 3-DP PCL framework maintaining the mechanical stability and a porous collagen matrix improving the biological activity. The results indicate that the compressive modulus of the composite constructs increased synergistically (over 40 MPa), providing sufficient mechanical support during new bone formation. On the other hand, the collagen matrix with a micro-porous architecture structurally increased scaffold areas and provided cellular adhesion sites, allowing for the functional construction of a favorable 3D microenvironment for BMSC adhesion, proliferation and extracellular matrix production. Moreover, critical-sized long bone defect (CSD) implantation demonstrated that the optimized composite constructs could promote bone tissue regeneration (5.5-fold) and bone-material osteointegration (4.7-fold), and decrease fibrosis encapsulation, compared to pristine PCL. The results indicate that these biomimetically ornamented PCL-COL constructs exhibit favorable mechanical properties and biological functionality, demonstrating great potential as an effective bone graft substitute for bone defect treatment. Meanwhile, they can also harness the advantages of 3-DP technology and a collagen-based functionalized strategy, facilitating the creation of customized and functional PCL-COL constructs for clinical translation.
&Lt;p>polycaprolactone Electrospun Fiber Scaffold Loaded with Ipscs-Nscs and ASCs As A Novel Tissue Engineering Scaffold for the Treatment of Spinal Cord Injury [Corrigendum]</p>

Xianhu Zhou,Guidong Shi,Baoyou Fan,Xin Cheng,Xiaolei Zhang,Xu Wang,Shen Liu,Yan Hao,Zhijian Wei,LianYong Wang,Shiqing Feng

DOI: https://doi.org/10.2147/ijn.s233822

IF: 7.033

2019-01-01

International Journal of Nanomedicine

Abstract:[This corrects the article DOI: 10.2147/IJN.S175914.].
3D Printed Cell-Free Bilayer Porous Scaffold Based on Alginate with Biomimetic Microenvironment for Osteochondral Defect Repair

Hui Wang,Jiaxin Zhang,Haotian Bai,Chenyu Wang,Zuhao Li,Zhonghan Wang,Qingping Liu,Zhenguo Wang,Xianggang Wang,Xiujie Zhu,Jiaqi Liu,Jincheng Wang,Xin Zhao,Luquan Ren,He Liu

DOI: https://doi.org/10.1016/j.bioadv.2024.214092

2024-01-01

Biomaterials Advances

Abstract:Despite significant progress in repairing osteochondral injuries using 3D printing technology, most cartilage layer scaffolds are made of degradable materials, making it difficult to simultaneously provide extracellular matrix functionality while replicating the mechanical properties of natural cartilage layers. Additionally, their degradation rate is challenging to align with cartilage regeneration. Furthermore, double-layer scaffolds commonly used for repairing osteochondral often exhibit inadequate bonding between the cartilage layer scaffolds and bone layer scaffolds. To solve these problems, we presented a bilayer scaffold composed of a 3D printed non-degradable thermoplastic polyurethane (TPU) scaffold filled with hydrogel (Gel) made of gelatin and sodium alginate as the cartilage layer (noted as TPU/Gel), meanwhile, a 3D printed polylactic acid (PLA) scaffold containing 10 % hydroxyapatite (HA) as the bone layer (noted as PLA/HA). At the junction of the bone layer and cartilage layer, TPU tightly bonded with the bone layer scaffold under high temperatures. The hydrogel filling within the TPU layer of cartilage served not only to lubricate the joint surface but also aided in creating a 3D microenvironment. The non-degradable nature of TPU allowed the cartilage layer scaffold to seamlessly integrate with the surrounding regenerated cartilage, achieving permanent replacement and providing shock absorption and weight-bearing effects. This effectively addressed the mechanical challenges associated with cartilage regeneration and resolved the inconsistency between cartilage regeneration and material degradation rates.
Polycaprolactone in Bone Tissue Engineering: A Comprehensive Review of Innovations in Scaffold Fabrication and Surface Modifications

Hsin-Yu Liang,Wei-Keung Lee,Jui-Tsen Hsu,Jie-Yu Shih,Tien-Li Ma,Thi Thuy Tien Vo,Chiang-Wen Lee,Ming-Te Cheng,I-Ta Lee

DOI: https://doi.org/10.3390/jfb15090243

2024-08-24

Abstract:Bone tissue engineering has seen significant advancements with innovative scaffold fabrication techniques such as 3D printing. This review focuses on enhancing polycaprolactone (PCL) scaffold properties through structural modifications, including surface treatments, pore architecture adjustments, and the incorporation of biomaterials like hydroxyapatite (HA). These modifications aim to improve scaffold conformation, cellular behavior, and mechanical performance, with particular emphasis on the role of mesenchymal stem cells (MSCs) in bone regeneration. The review also explores the potential of integrating nanomaterials and graphene oxide (GO) to further enhance the mechanical and biological properties of PCL scaffolds. Future directions involve optimizing scaffold structures and compositions for improved bone tissue regeneration outcomes.
High-Precision Flexible Fabrication of Tissue Engineering Scaffolds Using Distinct Polymers

Chuang Wei,Lei Cai,Bhushan Sonawane,Shanfeng Wang,Jingyan Dong

DOI: https://doi.org/10.1088/1758-5082/4/2/025009

2012-01-01

Biofabrication

Abstract:Three-dimensional porous structures using biodegradable materials with excellent biocompatibility are critically important for tissue engineering applications. We present a multi-nozzle-based versatile deposition approach to flexibly construct porous tissue engineering scaffolds using distinct polymeric biomaterials such as thermoplastic and photo-crosslinkable polymers. We first describe the development of the deposition system and fabrication of scaffolds from two types of biodegradable polymers using this system. The thermoplastic sample is semi-crystalline poly(ε-caprolactone) (PCL) that can be processed at a temperature higher than its melting point and solidifies at room temperature. The photo-crosslinkable one is polypropylene fumarate (PPF) that has to be dissolved in a reactive solvent as a resin for being cured into solid structures. Besides the direct fabrication of thermoplastic PCL scaffolds, we specifically develop a layer molding approach for the fabrication of crosslinkable polymers, which traditionally can only be fabricated by stereolithography. In this approach, a thermoplastic supporting material (paraffin wax) is first deposited to make a mold for each specific layer, and then PPF is deposited on demand to fill the mold and cured by the UV light. The supporting material can be removed to produce a porous scaffold of crosslinked PPF. Both PCL and crosslinked PPF scaffolds fabricated using the developed system have been characterized in terms of compressive mechanical properties, morphology, pore size and porosity. Mouse MC3T3-E1 pre-osteoblastic cell studies on the fabricated scaffolds have been performed to demonstrate their capability of supporting cell proliferation and ingrowth, aiming for bone tissue engineering applications.
3D Superelastic Scaffolds Constructed from Flexible Inorganic Nanofibers with Self‐Fitting Capability and Tailorable Gradient for Bone Regeneration

Lihuan Wang,Yuyou Qiu,Haijun Lv,Yang Si,Lifang Liu,Qi Zhang,Jianping Cao,Jianhua Yan,Xiaoran Li,Bin Ding

DOI: https://doi.org/10.1002/adfm.202203269

IF: 19

2022-01-01

Advanced Functional Materials

Abstract:Adv. Funct. Mater. 2019, 29, 1901407 DOI: 10.1002/adfm.201901407 In the initially published version of this article, incorrect images were contained in Figures 2a,b, 3e, 5g and S10c. The corrected figures are shown below. This correction does not affect the conclusion of this article. The authors would like to apologize for any inconvenience or misunderstanding caused.
Fabrication and characterization of the 3D-printed polycaprolactone/fish bone extract scaffolds for bone tissue regeneration

Seong-Yeong Heo,Seok-Chun Ko,Gun-Woo Oh,Namwon Kim,Il-Whan Choi,Won Sun Park,Won-Kyo Jung

DOI: https://doi.org/10.1002/jbm.b.34286

Abstract:Fish bone extract (FBE) containing a trioligopeptide (FBP-KSA, Lys-Ser-Ala) isolated from Johnius belengerii could induce osteogenic activities on MC3T3-E1 pre-osteoblasts in our previous study. Regarding the osteogenic effect of FBE, in the present study, we fabricated the three-dimensional (3D) interconnected polycaprolactone (PCL)/FBE scaffolds for bone tissue regeneration. After fabrication of PCL scaffolds using 3D printing, FBE was coated on the surface of PCL scaffolds by self-assembly process. In the physical characteristic and mechanical property tests, the results demonstrated that the fabricated scaffolds have the strut diameter (between 340 and 345 μm), pore size (between 470 and 480 μm), porosity (between 50% and 55%), and tensile properties (Young's modulus: 9.18-9.42 MPa; max tensile strengths 82.3-87.4 MPa) were similar to those of PCL scaffold. In the cell proliferation and osteogenic assay, the results showed that PCL/FBE scaffolds could significantly induce cell proliferation, calcium deposition, and the expression of osteogenic phenotype markers such as alkaline phosphatase, osteopontin, osteocalcin, and bone morphogenetic protein-2 in the osteoblasts. These results suggest that FBE-coated PCL scaffolds are promising materials for use in biomedical application to promote bone tissue regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1937-1944, 2019.
3D Printed Multi-Functional Scaffolds Based on Poly(ε-Caprolactone) and Hydroxyapatite Composites

Fan Liu,Honglei Kang,Zhiwei Liu,Siyang Jin,Guoping Yan,Yunlong Sun,Feng Li,Haifei Zhan,Yuantong Gu

DOI: https://doi.org/10.3390/nano11092456

IF: 5.3

2021-09-21

Nanomaterials

Abstract:3D Printed biodegradable polymeric scaffolds are critical to repair a bone defect, which can provide the individual porous and network microenvironments for cell attachment and bone tissue regeneration. Biodegradable PCL/HA composites were prepared with the blending of poly(ε-caprolactone) (PCL) and hydroxyapatite nanoparticles (HA). Subsequently, the PCL/HA scaffolds were produced by the melting deposition-forming method using PCL/HA composites as the raw materials in this work. Through a serial of in vitro assessments, it was found that the PCL/HA composites possessed good biodegradability, low cell cytotoxicity, and good biocompatibility, which can improve the cell proliferation of osteoblast cells MC3T3-E1. Meanwhile, in vivo experiments were carried out for the rats with skull defects and rabbits with bone defects. It was observed that the PCL/HA scaffolds allowed the adhesion and penetration of bone cells, which enabled the growth of bone cells and bone tissue regeneration. With a composite design to load an anticancer drug (doxorubicin, DOX) and achieve sustained drug release performance, the multifunctional 3D printed PCL/HA/DOX scaffolds can enhance bone repair and be expected to inhibit probably the tumor cells after malignant bone tumor resection. Therefore, this work signifies that PCL/HA composites can be used as the potential biodegradable scaffolds for bone repairing.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
An Effective Dual-Factor Modified 3D-Printed PCL Scaffold for Bone Defect Repair.

Yan Li,Qian Li,Hongming Li,Xiao Xu,Xiaoming Fu,Jijia Pan,Hui Wang,Jerry Ying Hsi Fuh,Yanjie Bai,Shicheng Wei

DOI: https://doi.org/10.1002/jbm.b.34555

2020-01-01

Abstract:Numerous bioactive molecules produced in cells are involved in the process of bone formation. We consider that appropriate, simultaneous application of two types of bioactive molecules would accelerate the regeneration of tissues and organs. Therefore, we combined aspirin-loaded liposomes (Asp@Lipo) and bone forming peptide-1 (BFP-1) on three dimensional-printed polycaprolactone (PCL) scaffold and determined whether this system improved bone regeneration outcomes. in vitro experiments indicated that Asp@Lipo/BFP-1at a 3:7 ratio was the best option for enhancing the osteogenic efficiency of human mesenchymal stem cells (hMSCs). This was confirmed in an in vivo cranial defect animal model. In addition, RNA-Seq was applied for preliminarily exploration of the mechanism of action of this composite scaffold system, and the results suggested that it mainly improved bone regeneration via the PI3K/AKT signaling pathway. This approach will have potential for application in bone tissue engineering and regenerative medicine.
Poly-ε-Caprolactone 3D-Printed Porous Scaffold in a Femoral Condyle Defect Model Induces Early Osteo-Regeneration

Arianna De Mori,Aikaterina Karali,Evangelos Daskalakis,Richard Hing,Paulo Jorge Da Silva Bartolo,Glen Cooper,Gordon Blunn

DOI: https://doi.org/10.3390/polym16010066

2023-12-24

Abstract:Large bone reconstruction following trauma poses significant challenges for reconstructive surgeons, leading to a healthcare burden for health systems, long-term pain for patients, and complex disorders such as infections that are difficult to resolve. The use of bone substitutes is suboptimal for substantial bone loss, as they induce localized atrophy and are generally weak, and unable to support load. A combination of strong polycaprolactone (PCL)-based scaffolds, with an average channel size of 330 µm, enriched with 20% w/w of hydroxyapatite (HA), β-tricalcium phosphate (TCP), or Bioglass 45S5 (Bioglass), has been developed and tested for bone regeneration in a critical-size ovine femoral condyle defect model. After 6 weeks, tissue ingrowth was analyzed using X-ray computed tomography (XCT), Backscattered Electron Microscopy (BSE), and histomorphometry. At this point, all materials promoted new bone formation. Histological analysis showed no statistical difference among the different biomaterials (p > 0.05), but PCL-Bioglass scaffolds enhanced bone formation in the center of the scaffold more than the other types of materials. These materials show potential to promote bone regeneration in critical-sized defects on load-bearing sites.
Covalently Grafted Biomimetic Matrix Reconstructs the Regenerative Microenvironment of the Porous Gradient Polycaprolactone Scaffold to Accelerate Bone Remodeling

Quanying Liu,Manyu Chen,Peiyang Gu,Lei Tong,Peilei Wang,Jiayi Zhu,Yang Xu,Gonggong Lu,En Luo,Jie Liang,Yujiang Fan,Xingdong Zhang,Yong Sun

DOI: https://doi.org/10.1002/smll.202206960

IF: 13.3

2023-01-01

Small

Abstract:Integrating a biomimetic extracellular matrix to improve the microenvironment of 3D printing scaffolds is an emerging strategy for bone substitute design. Here, a "soft-hard" bone implant (BM-g-DPCL) consisting of a bioactive matrix chemically integrated on a polydopamine (PDA)-coated porous gradient scaffold by polyphenol groups is constructed. The PDA-coated "hard" scaffolds promoted Ca2+ chelation and mineral deposition; the "soft" bioactive matrix is beneficial to the migration, proliferation, and osteogenic differentiation of stem cells in vitro, accelerated endogenous stem cell recruitment, and initiated rapid angiogenesis in vivo. The results of the rabbit cranial defect model (Φ = 10 mm) confirmed that BM-g-DPCL promoted the integration between bone tissue and implant and induced the deposition of bone matrix. Proteomics confirmed that cytokine adhesion, biomineralization, rapid vascularization, and extracellular matrix formation are major factors that accelerate bone defect healing. This strategy of highly chemically bonded soft-hard components guided the construction of the bioactive regenerative scaffold.
A Viscoelastic Chitosan-Modified Three-Dimensional Porous Poly(l-Lactide-co-ε-caprolactone) Scaffold for Cartilage Tissue Engineering.

Chao Li,Lili Wang,Zheng Yang,Gonhyung Kim,Haifeng Chen,Zigang Ge

DOI: https://doi.org/10.1163/092050610x551970

2012-01-01

Abstract:Biomaterials have been playing important roles in cartilage regeneration. Although many scaffolds have been reported to enhance cartilage regeneration, none of the scaffolds available are optimal regarding mechanical properties, integration with host cartilage and providing proper micro-environment for chondrocyte attachment, proliferation and differentiation. In the current study, chitosan-modified poly(L-lactide-co-ε-caprolactone) (PLCL) scaffolds were fabricated to simulate the main biochemical components of cartilage, as well as their interaction with the aim to endow them with viscoelasticity similar to native cartilage. Porous PLCL scaffolds were fabricated with porogen-leaching, freeze-extraction and freeze-gelation before chitosan was cross-linked. The acquired porous scaffolds had pore sizes ranging from 200 to 500 μm and about 85% porosity with good interconnection between individual pores. Chitosan was successfully cross-linked to PLCL scaffolds, as validated by ninhydrin staining and X-ray photoelectron spectroscopy (XPS). The viscoelasticity of the scaffolds was similar to that of bovine cartilage and they had a relatively good recovery ratio from compression deformation, while the Young's modulus was one order of magnitude less than cartilage. Not only could the chitosan-modified PLCL scaffolds promote cell adhesion and proliferation, but also they could significantly enhance excretion of aggrecan and type-II collagen, as testified by both histology and quantitative PCR, compared with PLCL scaffolds. With the fabrication of biomimetic scaffolds, it is possible to make scaffolds for cartilage tissue engineering, which are not only biocompatible, but also have mechanical properties similar to native cartilage.
3D Printing of Biphasic Osteochondral Scaffold with Sintered Hydroxyapatite and Polycaprolactone

Suo, Hairui,Chen, Yu,Liu, Jiali,Wang, Ling,Xu, Mingen

DOI: https://doi.org/10.1007/s10853-021-06229-x

IF: 4.5

2021-01-01

Journal of Materials Science

Abstract:Biphasic scaffolds with biomimetic structure are essential to osteochondral tissue engineering. However, insufficient mechanical properties limit their applications. Here, a novel biphasic scaffold was designed and fabricated using a multi-nozzle three-dimensional (3D) printer with hydroxyapatite (HAp) and polycaprolactone (PCL). HAp was first printed as the subchondral layer and strengthened by sintering, followed by printing PCL as the cartilage layer on top of the HAp layer. High interface bonding strength between the two layers was obtained by controlling the temperature of the printing platform. Compression tests showed that the biphasic scaffold had properties between those of pure HAp and PCL scaffolds, and its compressive modulus was about 18 MPa at the strain of 0–5% and 143 MPa at the strain of 5–10%, which was separately at the range of native cartilage and subchondral bone. Finite element simulation was adopted to investigate the variation of inner structure of the biphasic scaffold under compression, demonstrating a biomimetic strengthened structure with a deformable cartilage layer. Therefore, the biphasic HAp/PCL scaffold takes advantage of both the rigidity of HAp and the elasticity of PCL, thus has biomimetic mechanical properties for its further applications.
Bioactive bone scaffolds manufactured by 3D printing and sacrificial templating of poly(ε-caprolactone) composites as filler for bone tissue engineering

Liu, Ping,Yang, Xinghai

DOI: https://doi.org/10.1007/s10853-023-08319-4

IF: 4.5

2023-03-11

Journal of Materials Science

Abstract:The structures of a bone scaffold play a role in cell attachment and proliferation. In the present work, a poly(ε-caprolactone)/hydroxyapatite/simvastatin (PCL/HA/SIM) composite with a three-dimensional (3D) hierarchical porous structure was successfully fabricated by 3D printing a polyvinyl alcohol (PVA) sacrificial template and a subsequent polymer coating step. The SEM images show that an increase in HA content in the composite significantly decreases the diameter of micropores on the composite surface. The compressive strength measurement results of the composite scaffold show that the strength of the composite scaffold is significantly superior to that of the pure PCL scaffold. Nevertheless, the enhancement of strength in the composite scaffold is not monotonous with more content of HA in the composite as the maximum strength happens for 27.3 wt% of HA. Mouse embryonic fibroblasts (3T3) cells were in vitro cultivated in pure PCL and the composites and demonstrated that more HA content facilitates the proliferation of such cells. Furthermore, an addition of 0.2 wt% of simvastatin (SIM) to the PCL/HA composite scaffold to prepare significantly promoted the proliferation and osteogenic gene expression. The present work shows a potential novel strategy to construct bone tissue engineering scaffolds and cure bone defects.

materials science, multidisciplinary

3D-Printed Poly-Caprolactone Scaffolds Modified With Biomimetic Extracellular Matrices for Tarsal Plate Tissue Engineering (vol 8, 219, 2020)

Corrigendum: 3D-Printed Poly-Caprolactone Scaffolds Modified With Biomimetic Extracellular Matrices for Tarsal Plate Tissue Engineering

Corrigendum: Three-Dimensional Cartilage Regeneration Using Engineered Cartilage Gel With a 3D-Printed Polycaprolactone Framework.

Correction: Zhu et al. Mineralized Collagen/Polylactic Acid Composite Scaffolds for Load-Bearing Bone Regeneration in a Developmental Model. Polymers 2023, 15, 4194

4D polycarbonates via stereolithography as scaffolds for soft tissue repair

Fabrication and Application of a 3D-Printed Poly-ε-Caprolactone Cage Scaffold for Bone Tissue Engineering

Toward Biomimetic Porous Poly(ε-Caprolactone) Scaffolds: Structural Evolution and Morphological Control During Solid Phase Extrusion

The Enhanced Osteogenesis and Osteointegration of 3-DP PCL Scaffolds Via Structural and Functional Optimization Using Collagen Networks.

&Lt;p&gt;polycaprolactone Electrospun Fiber Scaffold Loaded with Ipscs-Nscs and ASCs As A Novel Tissue Engineering Scaffold for the Treatment of Spinal Cord Injury [Corrigendum]&lt;/p&gt;

3D Printed Cell-Free Bilayer Porous Scaffold Based on Alginate with Biomimetic Microenvironment for Osteochondral Defect Repair

Polycaprolactone in Bone Tissue Engineering: A Comprehensive Review of Innovations in Scaffold Fabrication and Surface Modifications

High-Precision Flexible Fabrication of Tissue Engineering Scaffolds Using Distinct Polymers

3D Superelastic Scaffolds Constructed from Flexible Inorganic Nanofibers with Self‐Fitting Capability and Tailorable Gradient for Bone Regeneration

Fabrication and characterization of the 3D-printed polycaprolactone/fish bone extract scaffolds for bone tissue regeneration

3D Printed Multi-Functional Scaffolds Based on Poly(ε-Caprolactone) and Hydroxyapatite Composites

An Effective Dual-Factor Modified 3D-Printed PCL Scaffold for Bone Defect Repair.

Poly-ε-Caprolactone 3D-Printed Porous Scaffold in a Femoral Condyle Defect Model Induces Early Osteo-Regeneration

Covalently Grafted Biomimetic Matrix Reconstructs the Regenerative Microenvironment of the Porous Gradient Polycaprolactone Scaffold to Accelerate Bone Remodeling

A Viscoelastic Chitosan-Modified Three-Dimensional Porous Poly(l-Lactide-co-ε-caprolactone) Scaffold for Cartilage Tissue Engineering.

3D Printing of Biphasic Osteochondral Scaffold with Sintered Hydroxyapatite and Polycaprolactone

Bioactive bone scaffolds manufactured by 3D printing and sacrificial templating of poly(ε-caprolactone) composites as filler for bone tissue engineering

&Lt;p>polycaprolactone Electrospun Fiber Scaffold Loaded with Ipscs-Nscs and ASCs As A Novel Tissue Engineering Scaffold for the Treatment of Spinal Cord Injury [Corrigendum]</p>