Abstract:Mordenite and ZSM-5 seeds could grow on the surface of an asymmetric α-Al2O3 support using an identical organic-free aluminosilicate solution under the same hydrothermal conditions. It suggests that the phase of zeolite can be controlled by varying the type of seed. Continuous mordenite and ZSM-5 membranes were prepared by the secondary growth method using corresponding seeds under appropriate conditions. The water content in the secondary growth mixture strongly influenced the growth of zeolite crystals. ZSM-5 seeds grew at a smaller rate and showed a habit of thin hexagonal plate in a concentrated mixture, while the crystals with a habit of rectangular parallelepiped were formed from a diluted secondary growth mixture. ZSM-5 crystals had poor intergrowth in the former case, whereas the crystals were highly intergrown in the latter case. ZSM-5 crystals in either membrane have a random orientation. In contrast to ZSM-5 zeolite, the crystal orientation in the secondary grown mordenite membranes strongly depended on the water content in the secondary growth mixture. The crystals in the mordenite membrane developed in a diluted secondary growth mixture were oriented with the (150) face parallel to the support surface, whereas the crystals in the membrane grown in a concentrated mixture were oriented with the (002) face parallel to the support surface. These results suggest that the crystal orientation in mordenite membranes can be manipulated only by changing the water content in a secondary growth mixture. The formation of the preferred crystal orientation in the secondary grown mordenite membrane is discussed in terms of an “evolutionary selection” process.

Strategies to Control Zeolite Particle Morphology

The control of phase and orientation in zeolite membranes by the secondary growth method

Controlling Crystal Morphology of Anisotropic Zeolites with Elemental Composition

Facile Morphology and Porosity Regulation of Zeolite ZSM-5 Mesocrystals with Synergistically Enhanced Catalytic Activity and Shape Selectivity

Advances in the Research of MFI Zeolite Morphology

Microstructural Manipulation of MFI-type Zeolite Films/membranes: Current Status and Perspectives

Morphology and Microstructural Optimization of Zeolite Crystals Utilizing Polymer Growth Modifiers for Enhanced Catalytic Application

The Morphology Control of Zeolite ZSM-5 by Regulating the Polymerization Degree of Silicon and Aluminum Sources

Preparation of Aluminosilicate Ferrierite Zeolite Nanosheets with Controllable Thickness in the Presence of a Sole Organic Structure Directing Agent

Tailoring Zeolite ZSM-5 Crystal Morphology/Porosity Through Flexible Utilization of Silicalite-1 Seeds As Templates: Unusual Crystallization Pathways in a Heterogeneous System.

Controlling Crystal Transformation Between Zeolite Zsm-5 and Mordenite Without Organic Structure-Directing Agent

Synthesis strategies and design principles for nanosized and hierarchical zeolites

Synthesis of zeolite NaP with controllable morphologies

Induction of Zeolite Membrane Formation by Implanting Zeolite Crystals into the Precursor of Ceramic Supports

Hierarchical zeolite structures with designed shape by gel-casting of colloidal nanocrystal suspensions

Control of crystallization rate and morphology of zeolite silicalite-1 in solvent-free synthesis

Empowering catalysis and separation: morphology control of MFI zeolites using organic additives

Hierarchical porous structures by using zeolite nanocrystals as building blocks

In-situ Etching Strategy for Manipulation of Hierarchical Zeolite and Its Application

Improvement of adsorption and catalytic properties of zeolites by precisely controlling their particle morphology

Tailoring the pore structure、morphology and acidity of MFI zeolites by the regulation of Si/Al ratio in the synthetic gel