D–π–D Molecular Semiconductors for Perovskite Solar Cells: the Superior Role of Helical Versus Planar Π-Linkers

Niansheng Xu,Aibin Zheng,Yuefang Wei,Yi Yuan,Jing Zhang,Ming Lei,Peng Wang

DOI: https://doi.org/10.1039/d0sc00362j

IF: 8.4

2020-01-01

Chemical Science

Abstract:A thia[5]helicene based molecular semiconductor maintains π–π stacking, ensuring a large domain of molecular aggregates and a high hole mobility.

What problem does this paper attempt to address?

Chrysene‐Based Azahelicene Π‐linker of D‐π‐D‐Type Hole‐Transporting Materials for Perovskite Solar Cells

Zefeng Tang,Tianyu Li,Yucai Cao,Yuyan Zhang,Lifei He,Aibin Zheng,Ming Lei

DOI: https://doi.org/10.1002/cssc.202101551

IF: 8.4

2021-01-01

ChemSusChem

Abstract:Chrysene is a readily available material for exploring new polycyclic aromatic hydrocarbons (PAHs). In this study, two chrysene based azahelicenes, nine-membered BA7 and ten-membered DA6, are constructed by intermolecular oxidative annulation of 6-aminochrysene and intramolecular annulation of N-6,N-12-bis(1-chloronaphthalen-2-yl)chrysene-6,12-diamine, respectively. The hexylated BA7 and DA6 and their brominated products were undoubtedly characterized by single crystal XRD. Subsequent amination with bis(9-methyl-9H-carbazol-3-yl)amine (BMCA) electron donor afforded D-pi-D-type semiconductors BA7-BMCA and DA6-BMCA with beneficial properties to act as hole transport materials for perovskite solar cell. Compared with 19.4 % champion power conversion efficiency (PCE) of BA7-BMCA based device, a higher PCE of 20.2 % for DA6-BMCA counterpart may be attributed to its S-shaped double helicene-like linker with extended pi-conjugated system.
Aza[5]helicene Rivals N‐Annulated Perylene As Π‐linker of D−π−D Typed Hole‐Transporters for Perovskite Solar Cells

Jianan Wang,Huilei Shi,Niansheng Xu,Jing Zhang,Yi Yuan,Ming Lei,Lidong Wang,Peng Wang

DOI: https://doi.org/10.1002/adfm.202002114

IF: 19

2020-01-01

Advanced Functional Materials

Abstract:The superior role of helical pi-linkers is demonstrated for the design of donor-pi linker-donor typed molecular semiconductors in perovskite solar cells (PSCs). Flat N-annulated perylene (NP) and contorted aza[5]helicene (A5H) are side-functionalized with methoxyphenyl and end-capped with dimethoxydiphenylamine electron-donor to afford two small-molecule hole-transporters J3 and J4. For methoxyphenyl functionalized pi-linkers, intermolecular pi...pi interactions in planar NP exist more extensively than those in helical A5H. However, for the dimethoxydiphenylamine derived hole-transporters with high highest occupied molecular orbital energy levels, a part of the pi...pi interaction remains for J4 with A5H, while this desirable effect for charge transport is completely deprived for J3 with NP. Thus, the theoretically predicted hole mobility of J4 single-crystal is even over two times higher than that of J3 one. Because of the larger size of the molecular aggregate, the hole mobility of the spin-coated J4 thin film is also over three times as high as that of the J3 analog. Due to the reduced transport resistance and enhanced recombination resistance, PSCs with J4 exhibit a power conversion efficiency of 21.0% at standard air mass 1.5 global conditions, which is higher than that of 19.4% with J3 and that of 20.3% with spiro-OMeTAD control.
Influence of Π-Linker on Triphenylamine-Based Hole Transporting Materials in Perovskite Solar Cells

Xuepeng Liu,Fantai Kong,Fuling Guo,Tai Cheng,Wangchao Chen,Ting Yu,Jian Chen,Zhan'ao Tan,Songyuan Dai

DOI: https://doi.org/10.1016/j.dyepig.2016.12.022

IF: 5.122

2017-01-01

Dyes and Pigments

Abstract:In this work, three simple hole transporting materials containing a thiophene, thieno [3,2-b]thiophene (two fused thiophene rings) or a dithieno[3,2-b:2′,3'-d]thiophene (three fused thiophene rings) as π-linker substituted by 4′,4″-dimethoxytriphenylamine donor groups are presented. The influence of increasing fused thiophene rings of π-linker in new compounds on the photophysical, electrochemical, thermal properties, hole mobility and photovoltaic performance in perovskite solar cells are investigated. The compound, in which dithieno[3,2-b:2′,3'-d]thiophene act as π-linker, shows better hole mobility and higher thermal stability than the compounds that contain thiophene or thieno [3,2-b]thiophene π-linker. Due to the improved hole mobility and superior hole extraction ability of the compound which contains dithieno[3,2-b:2′,3'-d]thiophene π-linker, the perovskite solar cells based on it achieve higher Jsc, Voc and FF values than the devices based on the other two compounds. These results indicate that the increasing fused thiophene rings of π-linker in hole transporting materials can be helpful to develop efficient perovskite solar cells.
A Pyrrole-Bridged Bis(oxa[5]helicene)-Based Molecular Semiconductor for Efficient and Durable Perovskite Solar Cells: Microscopic Insights

Yuefang Wei,Aibin Zheng,Xinrui Xie,Jingfeng Zhang,Lifei He,Peng Wang

DOI: https://doi.org/10.1021/acsmaterialslett.1c00291

IF: 11.4

2021-06-01

ACS Materials Letters

Abstract:Exotic organic semiconductors based on helicenes are attractive because of their peculiar topology-related optoelectronic properties and good solution-processability. We herein construct pyrrole-bridged bis(oxa[5]helicene) and further employ it as the π-linker of a solution-processable molecular semiconductor (DOP-OMeDPA) with improved hole mobility and glass transition temperature compared with its oxa[5]helicene counterpart. A solution-processed, doped semiconducting composite of DOP-OMeDPA presents high conductivity and slow interfacial charge recombination in perovskite solar cells, enabling the fabrication of thermostable devices with 21.3% efficiency. The DOP-OMeDPA-based thin film exhibits excellent morphology stability at 60 °C and remarkably attenuates the thermal decomposition of perovskite. Molecular dynamics modeling uncovers the microscopic origin of glass transition, that is, the torsional vibration of electron-donor for pristine materials, compared with the translational motion of molecules in doped ones.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsmaterialslett.1c00291?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsmaterialslett.1c00291</a>.Experimental section including synthesis and additional characterization of new compounds, methods of device fabrication and characterization, and additional data on thin film and device; theoretical modeling section including DFT calculation, normal-mode analysis, kMC simulation of hole transport, and MD modeling of Tg and gas diffusion (<a class="ext-link" href="/doi/suppl/10.1021/acsmaterialslett.1c00291/suppl_file/tz1c00291_si_001.pdf">PDF</a>)Single-crystal structure of DOP-OMeDPA (CCDC 2000790) (<a class="ext-link" href="/doi/suppl/10.1021/acsmaterialslett.1c00291/suppl_file/tz1c00291_si_002.cif">CIF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary
Unraveling the Structure-Property Relationship of Molecular Hole-Transporting Materials for Perovskite Solar Cells.

Lingyi Fang,Aibin Zheng,Ming Ren,Xinrui Xie,Peng Wang

DOI: https://doi.org/10.1021/acsami.9b13189

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Clarifying the structural basis and microscopic mechanism lying behind electronic properties of molecular semiconductors is of paramount importance in further material design to enhance the performance of perovskite solar cells. In this paper, three conjugated quasilinear segments of 9,9-dimethyl-9H-fluorene, 9,9-dimethyl-2,7-diphenyl-9H-fluorene, and 2,6-diphenyldithieno[3,2-b:2',3'-d]thiophene are end-capped with two bis(4-methoxyphenyl)amino groups for structurally simple molecular semiconductors Z1, Z2, and Z3, which crystallize in the monoclinic P21/n, triclinic P1̅, and monoclinic C2/c space groups, respectively. The modes and energies of intermolecular noncovalent interactions in various closely packed dimers extracted from single crystals are computed based on the quantum theory of atoms in molecules and energy decomposition analysis. Transfer integrals, reorganization energies, and center-of-mass distances in these dimers as well as band structures of single crystals are also calculated to define the theoretical limit of hole transport and microscopic transport pictures. Joint X-ray diffraction and space-charge-limiting current measurements on solution-deposited films suggest the dominant role of crystallinity in thin-film hole mobility. Photoelectron spectroscopy and photoluminescence measurements show that an enhanced interfacial interaction between the perovskite and Z3 could attenuate the adverse impact of reducing the energetic driving force of hole extraction. Our comparative studies show that the molecular semiconductor Z3 with a properly aligned highest occupied molecular orbital energy level and a high thin-film mobility can be employed for efficient perovskite solar cells, achieving a good power conversion efficiency of 20.84%, which is even higher than that of 20.42% for the spiro-OMeTAD control.
A Triple Axial Chirality, Racemic Molecular Semiconductor Based on Thiahelicene and Ethylenedioxythiophene for Perovskite Solar Cells: Microscopic Insights on Performance Enhancement

Aibin Zheng,Xinrui Xie,Yiming Wang,Niansheng Xu,Jing Zhang,Yi Yuan,Peng Wang

DOI: https://doi.org/10.1002/adfm.202009854

IF: 19

2021-02-12

Advanced Functional Materials

Abstract:For the low‐cost fabrication of large‐area, durable perovskite solar cells, it is of pivotal importance to engineer organic semiconducting films with a combined property of matched energy level, sufficiently large conductivity, high glass transition temperature, and excellent solution processability. Toward this goal, herein an in silico tailored molecular semiconductor (T5HE‐OMeTPA) with triple axial chirality, by joint use of thia[5]helicene and ethylenedioxythiophene, is reported. T5HE‐OMeTPA with a reduced reorganization energy of hole transfer can be exploited as the hole transport layer for perovskite solar cells with 21% efficiency, which also display excellent long‐term stability at 60°C. The doped, sufficiently conductive T5HE‐OMeTPA composite with a glass transition temperature of 121 °C not only exhibits persistent film morphology under thermal stress, but also surprisingly damps the motion of diffusive components of perovskite for a better control of the degradation of photoactive layer. The translational motion of both ions and molecules is intrinsically associated with the glass transition of a doped molecular semiconductor composite, which is in stark contrast to the microscopic fashion for the glass transition of an undoped molecular semiconductor, that is, thermally activated rotation of diphenylamine.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Control of Π–π Stacking of Dithienopyrrole-Based, Hole-Transporting Materials Via Lateral Substituents for High-Efficiency Perovskite Solar Cells

Aibin Zheng,Jianan Wang,Niansheng Xu,Rui Zhu,Yi Yuan,Jing Zhang,Jidong Zhang,Zesheng Li,Peng Wang

DOI: https://doi.org/10.1021/acsphotonics.8b01336

IF: 7

2018-01-01

ACS Photonics

Abstract:Dissecting the relationship of lateral substituents in organic semiconductors with molecular packing motif, charge transfer integral, and thin film morphology is of paramount importance to enhancing the mobility of hole-transporting layers and photovoltaic performance of emerging perovskite solar cells (PSCs). In this work, two dimethyltriphenylamino-substituted dithieno[3,2-b:2',3'-d]pyrroles are synthesized for the hole-transporting layer in triple-cation lead halide PSCs. X-ray crystallographic analysis of organic single crystals and theoretical modeling on the microscopic hole transport paths have disclosed that with respect to AZ1 possessing one n-propyl lateral substituent, the AZ2 hole transporter with 4-methoxyphenyl is characteristic of a closer intermolecular packing owing to a less short-axis slipped cofacial it-stacking configuration, and a larger averaged domain of molecule aggregates, which jointly contribute to a higher thin film hole mobility. The AZ2-based PSC exhibits an excellent power conversion efficiency of 19.4%, which is even higher than that (19.1%) of the control cell based on the state of the art hole-transporter spiro-OMeTAD. It seems that the weak interaction between 4-methoxyphenyl and lead ions at the perovskite boundaries can improve hole extraction kinetics and can passivate trap states at the perovskite surface, which brings forth a negligible hysteresis during the reverse and forward potential scans, along with high carrier mobility.
Molecular design of D-π-D-typed hole-transporting materials for perovskite solar cells based on the π-conjugated cores

Zhu-Zhu Sun,Ping-Ping Sun,Shuai Feng,Yu-Lin Xu,Jiang-Feng Liu

DOI: https://doi.org/10.1016/j.synthmet.2019.05.014

IF: 4

2019-08-01

Synthetic Metals

Abstract:The performances of four new D-π-D-typed hole-transporting materials (HTMs) with big π-conjugated linkers are simulated with density functional theory and the Marcus hopping model. Our results show that the highest occupied molecular orbital (HOMO) levels of new designed HTMs range from −5.22 to −5.39 eV, which presents a suitable energy alignment with the valence band of perovskite. Meanwhile, due to the strong electronic coupling between adjacent molecules and delocalized frontier molecular orbitals, the high hole mobilities are also obtained for these molecules with values of 1.03 × 10−1 cm2v−1 s−1 (L1), 3.67 × 10−2 cm2v−1 s−1 (L2), 1.05 × 10−2 cm2v−1 s−1 (L3), and 3.66 × 10−1 cm2v−1 s−1 (L4), respectively. Moreover, the weak absorption in visible light region and the large Stokes shifts will be also helpful to improve the performance of HTMs. In summary, the calculated results indicate that these new designed molecules with polycyclic π-conjugated cores could become potential HTM candidates to help create more efficient solar cells.

materials science, multidisciplinary,physics, condensed matter,polymer science
Halide Anion–fullerene Π Noncovalent Interactions: N-Doping and a Halide Anion Migration Mechanism in P–i–n Perovskite Solar Cells

X. Sun,L. Y. Ji,W. W. Chen,X. Guo,H. H. Wang,M. Lei,Q. Wang,Y. F. Li

DOI: https://doi.org/10.1039/c7ta06335k

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Iodide–fullerene π interactions play decisive roles in n-doping and electron transport of fullerenes at the perovskite–PCBM interface in the devices of perovskite solar cells (Pero-SCs).
Star-shaped D--D hole-transporting materials regulated by molecular planarity and their application in efficient perovskite solar cells

Jing Zhou,Yuqi Tian,Yanxin Yi,Yongzhen Wu,Bo Liu

DOI: https://doi.org/10.1016/j.jpowsour.2021.230102

IF: 9.2

2021-01-01

Journal of Power Sources

Abstract:During the molecular design of hole-transporting material (HTM) for perovskite solar cells (PSCs), the planarity is the critical factor, which can regulate multiple properties affecting the photovoltaic performance, including the hole transport and morphology uniformity. Herein, a planar carbazole group is applied as the core unit to obtain a star-shaped HTM CS-43. Owning to the planar core unit, CS-43 shows more negative HOMO level, which is beneficial to obtain high photovoltage, with respect to the twisted HTM CS-42. More importantly, compared with the twisted HTM CS-42, the planar core unit of CS-43 strengthens the trend of intermolecular stacking, thus resulting in the significant improvement in hole mobility. Furthermore, with the planar core unit, the morphology of CS-43 film is also improved. As an overall result of high hole mobility and excellent film morphology, the PSC based on CS-43 present a quite promising power conversion efficiency of 15.87% with longterm stability, which is over 40% higher than that of PSC prepared by twisted CS-42. Accordingly, the planarity improvement in core unit can optimize both the hole transporting and morphology performance, providing us a powerful strategy for the further development of small molecule HTM.
Methylthiophene terminated D–π–D molecular semiconductors as multifunctional interfacial materials for high performance perovskite solar cells

Hao Zhang,Yuhua Mao,Jie Xu,Shanshan Li,Fusheng Guo,Lingyu Zhu,Jianli Wang,Yongzhen Wu

DOI: https://doi.org/10.1039/d1tc05354j

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:Novel D–π–D molecular semiconductors with terminal methylthiophene groups were developed as multifunctional interfacial materials for improvement of perovskite solar cell performance.

materials science, multidisciplinary,physics, applied
Durable Perovskite Solar Cells with 24.5% Average Efficiency: the Role of Rigid Conjugated Core in Molecular Semiconductors

Ming Ren,Lingyi Fang,Yuyan Zhang,Felix T. Eickemeyer,Yi Yuan,Shaik M. Zakeeruddin,Michael Graetzel,Peng Wang

DOI: https://doi.org/10.1002/adma.202403403

IF: 29.4

2024-01-01

Advanced Materials

Abstract:Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite solar cell applications. Through direct arylation, two high glass transition temperature molecular semiconductors, DBC-ETPA (202 degrees C) and TPE-ETPA (180 degrees C) are synthesized, using dibenzo[g,p]chrysene (DBC) and 1,1,2,2-tetraphenylethene (TPE) tetrabromides with triphenylene-ethylenedioxythiophene-dimethoxytriphenylamine (ETPA). In comparison to spiro-OMeTAD, both semiconductors exhibit shallower HOMO energy levels, resulting in increased hole densities (generated by air oxidation doping) and accelerated hole extraction from photoexcited perovskite. Experimental and theoretical studies highlight the more rigid DBC core, enhancing hole mobility due to reduced reorganization energy and lower energy disorder. Importantly, DBC-ETPA possesses a higher cohesive energy density, leading to lower ion diffusion coefficients and higher Young's moduli. Leveraging these attributes, DBC-ETPA is employed as the primary hole-transport layer component, yielding perovskite solar cells with an average efficiency of 24.5%, surpassing spiro-OMeTAD reference cells (24.0%). Furthermore, DBC-ETPA-based cells exhibit superior operational stability and 85 degrees C thermal storage stability. Dibenzo[g,p]chrysene, a non-planar double helicene, displays enhanced rigidity compared to tetraphenylethene, enabling the development of a molecular semiconductor with elevated cohesive energy density and hole mobility. Applied in high-efficiency perovskite solar cell fabrication, it exhibits remarkable operational stability at 45 degrees C and storage stability at 85 degrees C. image
Modulating the Self‐Assembly of Coplanar D‐π‐D Hole‐Transporting Materials via Alkyl Chain Engineering for Efficient and Stable Inverted Perovskite Solar Cells

Ruixi Luo,Xin Zhao,Ning Cai,Jiehao Zhao,Tiejun Wang,Yonggang Min,Alex K.-Y. Jen

DOI: https://doi.org/10.1002/solr.202300070

IF: 9.1726

2023-02-12

Solar RRL

Abstract:Rational introduction of flexible alkyl chains into rigid conjugated molecules is a facile but effective strategy to develop advanced organic semiconductor materials for considerable enhancement of photovoltaic performance. In this work, we report seven hole‐transporting materials (HTMs) via attaching ethyl, hexyl, or ethylhexyl to benzodithiophene π linker and bromoethyl, bromobutyl, or bromohexyl to phenoxazine donor (D), respectively, named B 2 P 2 , B 6 P 2 , B 8 P 2 , B 6 P 4 , B 2 P 6 , B 6 P 6 (N01) and B 8 P 6 . Joint differential scanning calorimetry measurements and thin‐film absorption spectra of representative HTMs, B 8 P 6 , B 6 P 4 , and B 2 P 2 , reveal that alkyl chain modulation on coplanar D‐π‐D HTMs enables synchronous optimization of their solution processability, molecular packing and thermal phase transition. Consequently, benefiting from the favorable self‐assembly and surface characteristics of hole‐transporting layers and further induced superior upper perovskite‐growth, B 8 P 6 and B 6 P 4 ‐based inverted perovskite solar cells exhibit decent power conversion efficiencies of 20.67% and 20.13%, respectively, prior to that of amorphous B 2 P 2 (19.04%). Analysis on steady‐state/transient photoluminescence spectra and light intensity‐dependent short‐circuit photocurrent and open‐circuit voltage (Voc) demonstrate that more ordered assemblies of HTMs obtained via alkyl chain engineering could facilitate efficient interfacial charge transport/extraction and inhibit detrimental charge recombination, accounting for an enhanced Voc and fill factor. This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary
Twisted or Planar? Side‐Chain Tailoring of Fluorene‐Based Hole‐Transport Materials for Efficient and Stable Perovskite Solar Cells

Rui Li,Maning Liu,Sri Kasi Matta,Alaa Almasri,Jingshu Tian,Hongzhen Wang,Hannu Pekka Pasanen,Salvy P. Russo,Paola Vivo,Haichang Zhang

DOI: https://doi.org/10.1002/solr.202370181

IF: 9.1726

2023-09-28

Solar RRL

Abstract:Ordered Vacancy Double Perovskite In article number 2300367, Liu, Vivo, Zhang, and co‐workers tailored the side‐chains of fluorene‐based small‐molecule hole‐transport materials with twisted triphenylamine groups. They discovered that the generation of a strong electric field at the perovskite and twisted side‐chain interface, can not only enhance the interfacial charge transfer but also prevent the hygroscopic dopants diffusion towards the perovskite, eventually leading to efficient and highly stable perovskite solar cells.

energy & fuels,materials science, multidisciplinary
Influence of twisted or planar linkers on the performance of quasi-two-dimensional fused perylene diimide acceptors for organic solar cells

Yuli Yin,Ming Liu,Fengyun Guo,Shiyong Gao,Yong Zhang

DOI: https://doi.org/10.1016/j.dyepig.2022.110787

IF: 5.122

2022-01-01

Dyes and Pigments

Abstract:Quasi-two-dimensional (quasi-2D) fused perylene diimide building block is effective for constructing high-performance non-fullerene acceptors, while the exploration of their structure-property relationship remains critical, yet challenging. Herein, two quasi-2D non-fullerene acceptors (FPDI-V and FPDI-E) featuring vinylene or ethynylene linker were developed to reveal the effects of molecular geometry on photophysics, morphology and device performances. We observed that such minor chemical variations can lead to distinct difference on ab-sorption spectra, energy levels, and the photovoltaic properties, but only have slight effects on crystallinity, molecular packing and film morphology. The resulting device based on PTB7-Th:FPDI-V delivered a power conversion efficiency of 7.53%, which is higher than those of FPDI-E based device (6.37%). The improved photovoltaic performance of FPDI-V with a twisted vinylene linker should come from the enhanced absorption coefficient, upshifted molecular energy levels, higher exciton dissociation rate, and weaker charge recombina-tion. This result provides an updated idea for further designing and structural optimizing of quasi-2D non-fullerene acceptors.
Hole-transporting Alternating Copolymers for Perovskite Solar Cells: Thia[5]helicene Comonomer Outperforms Planar Perylothiophene Analog

Lifei He,Yuyan Zhang,Bing Zhang,Tianyu Li,Yaohang Cai,Ming Ren,Jing Zhang,Peng Wang,Yi Yuan

DOI: https://doi.org/10.1039/d4ee00513a

IF: 32.5

2024-01-01

Energy & Environmental Science

Abstract:Semiconducting polymers with high glass transition temperatures play a pivotal role in advancing thermally tolerant organic optoelectronic devices. This investigation underscores the remarkable potential of helicene as a comonomer in the construction of semiconducting polymers. Non-planar thia[5]helicene or planar perylo[1,12-bcd]thiophene is co-polymerized in an alternating fashion with 3,4-ethylenedioxythiophene, phenoxazine, and 3,4-ethylenedioxythiophene, resulting in two quaternary alternating copolymers. The thiahelicene-based alternating copolymer, characterized by a deeper HOMO energy level, exhibits decelerated hole extraction kinetics and diminished hole density compared to its perylothiophene-based counterpart. Notably, due to enhanced solubility, the thiahelicene-based copolymer demonstrates increased molecular weight, which contributes to higher glass transition temperature and hole mobility. When utilized as a hole transport material in n-i-p type perovskite solar cells, the thiahelicene-based copolymer demonstrates an elevated average power conversion efficiency (25.2%), enhanced thermal storage stability, and improved operational endurance. Compared to planar perylothiophene, thiahelicene has been demonstrated as a superior co-monomer for crafting a high-performance semiconducting polymer in n-i-p perovskite solar cells.
Molecular orientation, anisotropic electron transport and photovoltaic properties of ladder-type heteroheptacene-based semiconductors

Pengsong Wang,Yunlong Ma,Pan Yin,Dongdong Cai,Shuo Wan,Qingdong Zheng

DOI: https://doi.org/10.1016/j.cej.2021.129497

IF: 15.1

2021-08-01

Chemical Engineering Journal

Abstract:Control over the molecular orientation of organic semiconductors with respect to the substrate plays a critical role in determining the performance of organic electronic devices. In this work, three ladder-type heteroheptacene-based small molecules with branched or unbranched side chains flanked in different positions of their conjugated backbone (M11, M12, and M13), were designed and synthesized to investigate the effect of side-chains on the crystallinity, molecular orientation, and optoelectronic properties of the organic semiconductors. When linear n-dodecyl side-chains are attached to the nitrogen atoms of the heteroheptacene core, the resulting molecule (M11) exhibits high crystallinity and edge-on molecular orientation, thus leading to excellent horizontal charge transport with a field-effect transistor (FET) mobility of 3.95 × 10−2 cm2 V−1 s−1. Replacing the linear n-dodecyl chains on the nitrogen atoms with the branched 2-butyloctyl chains leads to the organic semiconductors (M12 and M13) with the face-on dominated molecular orientation thereby leading to two orders of magnitude enhancement in the vertical charge transport in comparison with M11. Consequently, M12 and M13 show much higher power conversion efficiencies (PCEs) of 11.55% and 13.14%, respectively, compared to M11 which exhibits a PCE of 2.26% under the same device fabrication conditions. Optimization on the M13-based solar cells yields a further improved PCE of 15.63% which is among the highest values for the A-D-A type nonfullerene acceptors. The results reported in this work highlight that modulating the molecular orientation of organic semiconductors is a highly effective molecular design strategy to boost the performance of optoelectronic devices, thus also providing new insights into the molecular design guidelines for the next generation of high-performance semiconductors for the FET and photovoltaic applications.

engineering, chemical, environmental
Benzothiadiazole-based Hole Transport Materials for High-Efficiency Dopant-Free Perovskite Solar Cells: Molecular Planarity Effect

Xiang Zhou,Fantai Kong,Yuan Sun,Yin Huang,Xianxi Zhang,Rahim Ghadari

DOI: https://doi.org/10.1016/j.jechem.2019.09.020

2020-01-01

Abstract:A new benzothiadiazole-based D-A-D hole transport material (DTBT) has been designed and synthesized with a more planar structure by introducing of thiophene bridges. The results indicate a lower band gap and quite higher hole mobility for the DTBT. Furthermore, the enhancement in molecular planarity with simple thiophene unit increases the hole mobility of DTBT (8.77 x10(-4) cm(2) V-1 s(-1)) by about 40%. And when DTBT is used as hole transport material in perovskite solar cells, the photoelectric conversion efficiency of the corresponding dopant-free devices is also significantly improved compared with that of the conventional BT model molecule without thiophene. In terms of device stability, DTBT-based devices show a favorable long-term stability, which keep 83% initial efficiency after 15 days. Therefore, the introducing of thiophene bridges in D-A-D typed HTMs can improve the molecular planarity effectively, thereby increasing the hole mobility and improving device performance. (C) 2019 Science Press and Dalian Institute of Chemica lPhysics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
Heteroatom effect on linear-shaped dopant-free hole transporting materials for perovskite solar cells

Zi'an Zhou,Xianfu Zhang,Rahim Ghadari,Xuepeng Liu,Wenjun Wang,Yong Ding,Molang Cai,Jia Hong Pan,Songyuan Dai

DOI: https://doi.org/10.1016/j.solener.2021.04.034

IF: 7.188

2021-06-01

Solar Energy

Abstract:A series of linear-shaped D-π-D and D-A-D hole transporting materials (HTMs) with different heteroatom-containing bridges, such as furan, thiophene, selenophene, 2,1,3-benzoxadiazole, 2,1,3-benzothiadiazole and 2,1,3-benzoselenadiazole, are designed, prepared and implemented in perovskite solar cells (PSCs). The effect of the variation heteroatom bridge on the photophysical, electrochemical, and the photovoltaic properties in devices are systematically investigated. D-π-D HTMs exhibit gradually bathochromic spectrum responding along with increasing atomic numbers (from O, S to Se). However, D-A-D molecules exhibit no regular variation trend of photophysical and electrochemical properties. When used in PSCs, the photoelectric conversion efficiency of the devices gradually decreased along with increasing atomic numbers whether D-π-D or D-A-D HTMs. Unexpectedly, Se-containing molecules show the best hole extraction ability according to photoluminescence study. The relatively low conductivity of Se-based HTMs, resulted from gradually increased dihedral angles between the bridge and the adjacent triphenylamine side arms, may mainly limited the device performance. The results would give some insights for designing novel efficient HTMs for PSCs.

energy & fuels
Effects of Heteroatom and Extending the Conjugation on Linear Hole-Transporting Materials for Perovskite Solar Cells

Ying Wang,Nan Wu,Xianfu Zhang,Xuepeng Liu,Mingyuan Han,Rahim Ghadari,Fuling Guo,Yong Ding,Molang Cai,Songyuan Dai

DOI: https://doi.org/10.1021/acsaem.2c01267

IF: 6.4

2022-09-06

ACS Applied Energy Materials

Abstract:The investigation of high-performance molecular hole-transporting materials (HTMs) plays an irreplaceable role in the improvement of perovskite solar cells (PSCs). Herein, four thiophene-arylamine linear HTMs with different π-bridges have been designed and prepared. The effects of the heteroatom and extending the conjugation by double bonds on molecular optical, electrochemical, hydrophobic, film-forming, and photovoltaic performance in PSCs are investigated. The molecules with double bonds demonstrate significantly better planarity and more efficient intramolecular charge transfer, leading to higher hole mobility and better hole extraction ability. Moreover, it is noted that the molecules with the oxygen-based bridge (3,4-ethylenedioxythiophene) exhibit more planar structures compared with sulfur-based ones (3,4-ethylenedithiothiophene) whether they contain double bonds or not. When used in PSCs, the devices based on more planar molecules containing extending double bond conjugation and the oxygen-based bridge obtain higher efficiency and improved stability. Moreover, the 3,4-ethylenedioxythiophene-bridged molecule with double bonds even shows an efficiency over 20%, which is even slightly higher than the conventional spiro-OMeTAD under the same conditions.

materials science, multidisciplinary,chemistry, physical,energy & fuels

D–π–D Molecular Semiconductors for Perovskite Solar Cells: the Superior Role of Helical Versus Planar Π-Linkers

Chrysene‐Based Azahelicene Π‐linker of D‐π‐D‐Type Hole‐Transporting Materials for Perovskite Solar Cells

Aza[5]helicene Rivals N‐Annulated Perylene As Π‐linker of D−π−D Typed Hole‐Transporters for Perovskite Solar Cells

Influence of Π-Linker on Triphenylamine-Based Hole Transporting Materials in Perovskite Solar Cells

A Pyrrole-Bridged Bis(oxa[5]helicene)-Based Molecular Semiconductor for Efficient and Durable Perovskite Solar Cells: Microscopic Insights

Unraveling the Structure-Property Relationship of Molecular Hole-Transporting Materials for Perovskite Solar Cells.

A Triple Axial Chirality, Racemic Molecular Semiconductor Based on Thiahelicene and Ethylenedioxythiophene for Perovskite Solar Cells: Microscopic Insights on Performance Enhancement

Control of Π–π Stacking of Dithienopyrrole-Based, Hole-Transporting Materials Via Lateral Substituents for High-Efficiency Perovskite Solar Cells

Molecular design of D-π-D-typed hole-transporting materials for perovskite solar cells based on the π-conjugated cores

Halide Anion–fullerene Π Noncovalent Interactions: N-Doping and a Halide Anion Migration Mechanism in P–i–n Perovskite Solar Cells

Star-shaped D--D hole-transporting materials regulated by molecular planarity and their application in efficient perovskite solar cells

Methylthiophene terminated D–π–D molecular semiconductors as multifunctional interfacial materials for high performance perovskite solar cells

Durable Perovskite Solar Cells with 24.5% Average Efficiency: the Role of Rigid Conjugated Core in Molecular Semiconductors

Modulating the Self‐Assembly of Coplanar D‐π‐D Hole‐Transporting Materials via Alkyl Chain Engineering for Efficient and Stable Inverted Perovskite Solar Cells

Twisted or Planar? Side‐Chain Tailoring of Fluorene‐Based Hole‐Transport Materials for Efficient and Stable Perovskite Solar Cells

Influence of twisted or planar linkers on the performance of quasi-two-dimensional fused perylene diimide acceptors for organic solar cells

Hole-transporting Alternating Copolymers for Perovskite Solar Cells: Thia[5]helicene Comonomer Outperforms Planar Perylothiophene Analog

Molecular orientation, anisotropic electron transport and photovoltaic properties of ladder-type heteroheptacene-based semiconductors

Benzothiadiazole-based Hole Transport Materials for High-Efficiency Dopant-Free Perovskite Solar Cells: Molecular Planarity Effect

Heteroatom effect on linear-shaped dopant-free hole transporting materials for perovskite solar cells

Effects of Heteroatom and Extending the Conjugation on Linear Hole-Transporting Materials for Perovskite Solar Cells