Abstract:Transition metal sulfide semiconductors have achieved significant attention in the field of photocatalysis and degradation of pollutants. MoS2 with a two dimensional (2D) layered structure, a narrow bandgap and the ability of getting excited while being exposed to visible light, has demonstrated great potential in visible-light-driven photocatalysts. However, it possesses fast-paced recombination of charges. In this study, the coupled MoS2 nanosheets were synthesized with ZnO nanorods to develop the heterojunctions photocatalyst in order to obtain superior photoactivity. The charge transfer in this composite is not adequate to achieve desirable activity. Therefore, heterojunction was modified by reduced graphene oxide (RGO) nanosheets and carbon nanotubes (CNTs) to develop the RGO/ZnO/MoS2 and CNTs/ZnO/MoS2 ternary nanocomposites. The structure, morphology, composition, optical and photocatalytic properties of the as-fabricated samples were characterized through X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray (EDX), elemental mapping, Photoluminescence (PL), Ultraviolet-Visible spectroscopy (UV-VIS), and Brunauer-Emmett-Teller (BET) techniques. The photo-catalytic performance of all samples was evaluated through photodegradation of aniline in aqueous solution. The combination of RGO or CNTs into the ZnO/MoS2 greatly promoted the catalytic activity. However, the resulting RGO/ZnO/MoS2 ternary nanocomposites showed appreciably increased catalytic performance, faster than that of CNTs/ZnO/MoS2. Charge carrier transfer studies, the BET surface area analysis, and the optical studies confirmed this superiority. The role of operational variables namely, solution pH, catalyst dosage amount, and initial concentration of aniline was then investigated for obtaining maximum degradation. Complete degradation was observed, in the case of pH = 4, catalyst dosage of 0.7 g/L and aniline concentration of 80 ppm, and light intensity of 100 W. According to the results of trapping experiments, hydroxyl radical was found to be the main active species in the photocatalytic reaction. Meanwhile, a plausible mechanism was proposed for describing the degradation of aniline upon ternary composite. Moreover, the catalyst showed excellent reusability and stability after five consecutive cycles due to the synergistic effect between its components. Total-Organic-Carbon concentration (TOC) results suggested that complete mineralization of aniline occurred after 210 min of irradiation. Finally, a real petrochemical wastewater sample was evaluated for testing the catalytic ability of the as-fabricated composites in real case studies and it was observed that the process successfully quenched 100% and 93% of Chemical Oxygen Demand (COD) and TOC in the wastewater, respectively.

MoS<sub>2</sub>/RGO composites for photocatalytic degradation of ranitidine and elimination of NDMA formation potential under visible light

MoS2/RGO composites for photocatalytic degradation of ranitidine and elimination of NDMA formation potential under visible light

Photocatalytic Degradation of Ranitidine and Reduction of Nitrosamine Dimethylamine Formation Potential over MXene-Ti3C2/MoS2 under Visible Light Irradiation.

Hierarchically design MoS2/CdNi@RGO ultra-thin hybrid sheet for Photocatalytic degradation of organic contaminants fingerprinting in environmental matrices

Fabricating a novel ternary recyclable Fe3O4/graphene/sulfur-doped g-C3N4 composite catalyst for enhanced removal of ranitidine under visible-light irradiation and reducing of its N-nitrosodimethylamine formation potential

Construction of RGO@N-ZnO nanocomposite photocatalyst for disinfection of microbes and dye degradation under visible light irradiation

Facile synthesis of MoS 2 nanoparticles anchored graphene nanocomposite for enhanced photocatalytic activity under solar irradiation

Developing the Ternary ZnO Doped MoS2 Nanostructures Grafted on CNT and Reduced Graphene Oxide (RGO) for Photocatalytic Degradation of Aniline

Investigation on synergistic effect of rGO and carbon quantum dots-embedded ZnO hollow spheres for improved photocatalytic aqueous pollutant removal process

MoO 3 /HAp nanocomposites encapsulated in Graphene Oxide nanoparticle: Development of a novel ternary nanostructure and evaluation of its photocatalytic activity for the treatment of wastewater in environmental remediation

Facile hydrothermal synthesis of visible‐light‐driven MnS/rGO nanocomposite for photocatalytic degradation of methylene blue dye

Three-dimensional ordered mesoporous Co3O4/peroxymonosulfate triggered nanoconfined heterogeneous catalysis for rapid removal of ranitidine in aqueous solution

Efficient photocatalytic degradation of chloramphenicol from contaminated water over rGO@MoS 2 nanocomposites

Fabrication of MoO3/rGO/Au composite for increased photocatalytic degradation of methylene blue

Co3O4-ZnO/rGO catalyst preparation and rhodamine B degradation by sulfate radical photocatalysis

Facile synthesis of Zr4+ substituted Mn0.2Co0.8Fe2−xO4 nanoparticles and their composites with reduced graphene oxide for enhanced photocatalytic performance under visible light irradiation

Photocatalytic degradation of rhodamine B by using a nanocomposite of cuprous oxide, three-dimensional reduced graphene oxide, and nanochitosan prepared via one-pot synthesis

Preparation and Enhanced Visible-Light Photoelectrocatalytic Activity of Ternary TiO2ZnO/RGO Nanocomposites

Microwave-Assisted Synthesis of rGO-ZnO/CuO Nanocomposites for Photocatalytic Degradation of Organic Pollutants

Radiation Synthesis of CdS/reduced Graphene Oxide Nanocomposites for Visible-Light-driven Photocatalytic Degradation of Organic Contaminant

A novel 3-dimensional graphene-based cobalt-manganese bimetallic layered double hydroxide:Formation mechanism and performance in photo-assisted permonosulfate-activated degradation of sulfamethoxazole in aqueous solution