Abstract:In this work, we present a facile and scalable method to prepare Co3O4/RGO nanoparticles with superior microstructure by solvothermal and subsequent calcination. The Co3O4/RGO nanoparticles obtained at 550 °C demonstrated a high reversible capacity of 1191.9 mAh g−1 with capacity retention ratios of 98.9 % after 100 cycles at 0.5 A g−1. The facile synthesis method of Co3O4/RGO nanoparticles would offer possibilities for the development of high‐performance anode material for LIBs. A potential anode material for lithium‐ion batteries (LIBs), Co3O4 has been widely considered by many scholars because of its excellent properties in terms of electrochemical characteristics and theoretical specific capacity. However, according to the existing research results, we found that the improvement of the electrochemical performance of Co3O4 has encountered a bottleneck because its intrinsic conductivity is not high enough, and more importantly, the volume expansion is too significant during the charge and discharge process, which leads to the material structure breaking. Therefore, this paper proposes a simple and scalable solvothermal and subsequent calcination method to prepare Co3O4 and reduced graphene oxide (RGO) composite nanoparticles with superior microstructures, and their morphological and electrochemical properties were investigated at different calcination temperatures. As a high‐performance anode material for lithium‐ion batteries, the Co3O4/RGO nanoparticles obtained at 550 °C exhibited terrific initial discharge capacity of 1714.2 mAh g−1, the reversible specific capacity of 1191.9 mAh g−1 with quality coulombic efficiency 98.17 % at 0.5 A g−1 after 100 cycles and extraordinary rate performance (907.6 mAh g−1 with a coulombic efficiency of 99.2 % at 2 A g−1). The facile synthesis method and excellent findings have led to better application prospects for Co3O4/RGO nanoparticles.

Indium Phosphide/Reduced Graphene Oxide Composites As High-Performance Anodes In Lithium-Ion Batteries

A Reduced Graphene Oxide/sno2/polyaniline Nanocomposite for the Anode Material of Li-ion Batteries

TiO2/NiO/reduced Graphene Oxide Nanocomposites As Anode Materials for High-Performance Lithium Ion Batteries

Pomegranate structured C@pSi/rGO composite as high performance anode materials of lithium-ion batteries

Graphene and cobalt phosphide nanowire composite as an anode material for high performance lithium-ion batteries

Co3O4/RGO Nanoparticles Fabricated by Facile Solvothermal Method as an Anode Material for High‐Performance Lithium‐Ion Batteries

Fe3o4/Sno2/Rgo Ternary Composite As A High-Performance Anode Material for Lithium-Ion Batteries

Cobalt Oxide Modified Reduced Graphene Oxide Nanocomposite as Anode Materials for Lithium-Ion Batteries

Reduced graphene oxide-wrapped copper cobalt selenide composites as anode materials for high-performance lithium-ion batteries

Reduced graphene oxide@nitrogen doped carbon with enhanced electrochemical performance in lithium ion batteries

LiMnO2@rGO Nanocomposites for High‐performance Lithium‐ion Battery Cathodes

Synthesis of MnO/reduced Graphene Oxide Composites As High Performance Anode Materials for Li-ion Batteries

Mn3O4 nanoparticles embedded in 3D reduced graphene oxide network as anode for high-performance lithium ion batteries

Porous A-SnO2/rGO Nanocomposite via Annealing Treatment with Stable High-Capacity as Anode of Lithium-Ion Battery

Self-assembled Li4Ti5O12/rGO nanocomposite anode for high power lithium-ion batteries

Synthesis and characterization of LiMn0.8Fe0.2PO4/rGO/C for lithium-ion batteries via in-situ coating of Mn0.8Fe0.2C2O4·2H2O precursor with graphene oxide

Synthesis and Electrochemical Properties of Co3O4@Reduced Graphene Oxides Derived from MOF as Anodes for Lithium-Ion Battery Applications

High-reversible capacity of Perovskite BaSnO3/rGO composite for Lithium-Ion Battery Anodes

Covalently Coupled Hybrid of Graphitic Carbon Nitride with Reduced Graphene Oxide As a Superior Performance Lithium-Ion Battery Anode.

Elaborate interface design of SnS2/SnO2@C/rGO nanocomposite as a high-performance anode for lithium-ion batteries

Preparation of graphene oxide/poly(o-phenylenediamine) hybrid composite via facile in situ assembly and post-polymerization technology for the anode material of lithium ion battery